PDA

View Full Version : N320 and 9 mm and 45Auto



Balta
01-05-2013, 06:41 PM
Anyone have some loads to share? 9 mm is for IPSC shooting,minor..I have Mihecs 9 mm mold in 147 and 140 grains that drops bullets with my alloy at 145 grain and 137-138 grain..
Thanks...

MiHec
01-06-2013, 03:04 PM
Use 3.6 for 147 grain and 3.7 (3.8) for 145 grain.

Start lower abuot 10% !!!!!!!

Both loads are for 5" barrel and they will give you 135+ power factor. (Tested in my TANFOGLIO LIMITED CUSTOM 9mm)

P.s.

Ehhhhh sada vidim ko pita.....

za 45 (200 grain) stavi 4.7 N320 (MAX 4.9)

Balta
01-06-2013, 04:09 PM
OOOO "The Mann" is hiere.:))
Any "colder" load for 9 mm?
Do you maybe know the velocity of the load for 45 ??

DrCaveman
01-06-2013, 07:53 PM
Tried ramshot competition in 9mm? I am looking to do so, and I think it is very close to n320 in burn rate and density. Load data is 'nearly' interchangeable I think.

I also believe that it is made in Belgium. So maybe available in Europe somehow, though we get it here from miles city, Montana.

Balta
01-07-2013, 05:21 PM
For now i have only N320!Hope to be better soon

Beau Cassidy
01-07-2013, 06:52 PM
Over on BrianEnos.com N320 is the cat's meow for 9mm.

Balta
01-09-2013, 04:07 PM
Gonna chek that,thanks