mold handles question???

[fanner 50]

Will my Lee mold handles fit a Lyman Mold? I was going to order a Lyman 314299 mold from Midway and before I spend another $29 on handles I figured I better ask. It's bad enough to have to pay $56 for the mold. I have three new Lee molds with handles(single cav) and two Lee molds with handles(2 cav) will any of these work?:confused:

[45nut]

The short answer is no, the 1 & 2 cav lee handles are (semi) permanently attached.

[mooman76]

If you pick up the Lee 6 cavity mould handels they fit most moulds including Lyman and they run about $13 and Midway has them on sale allot usually around $11 or $12.

[jonk]

Ditto; Lee 6 cavity handles will fit and provide better clearance than do most Lyman handles. But Lyman handles WON'T fit the Lee mold.

[leftiye]

Lyman handles are cheap on eVilbay! Not so RCBS, and Saeco.