PDA

View Full Version : New member wanting to say hello



M Hicks
12-12-2012, 12:27 PM
I checked in here a bunch of times, aka lurked, and decided to take the plunge since I am looking around here frequently. I hope to learn a lot more than I think I already know and hopefully can pass on some good info to others. I have been handloading for about 10 years and casting for about nine now. I look forward to getting to know the people here.

41 mag fan
12-12-2012, 12:30 PM
Welcome...lots of good info and people on the forum.

gray wolf
12-12-2012, 01:07 PM
Always another empty seat, welcome to the forum.
Share what you know, ask about what your unsure off.
The folks here are very special, and very nice, did I say eager to help ?

quilbilly
12-12-2012, 01:26 PM
Welcome from the rainy Pacific NW. Tell us what you are casting.

Le Loup Solitaire
12-12-2012, 02:23 PM
Hi and welcome to the forum. There is lots to do here, much info and a lot to learn from the many members who also will like to share with you your own knowledge. LLS

gwpercle
12-12-2012, 03:03 PM
Hello new member M Hicks....Welcome to the forum from Baton Rouge, Louisiana , the land of heat, humidity and hurricanes. Glad you came in. What you been loading ?

gary

M Hicks
12-12-2012, 04:08 PM
Right now I am in Nebraska. Stationed here for the next couple years then off to a coast most likely. I cast for 9mm, 38 special, 357 magnum, 44 Magnum and 45 ACP. I roll my own for those along with 45 Colt, 223 Rem, 270 Win, 30-30 WCF and 308 Win.

M Hicks
12-12-2012, 04:10 PM
I'm one of those "inquisitive" types that enjoys tinkering with things. I do break some stuff but generally learn from it and produce a better product the next go round. I was looking through a few of the threads on do it yourself HP molds. You guys are killing me already. I have it narrowed down to a couple I might try it on. I need to get it down to one though.

41 mag fan
12-12-2012, 04:44 PM
I'm one of those "inquisitive" types that enjoys tinkering with things. I do break some stuff but generally learn from it and produce a better product the next go round. I was looking through a few of the threads on do it yourself HP molds. You guys are killing me already. I have it narrowed down to a couple I might try it on. I need to get it down to one though.

Good luck!!

MtGun44
12-12-2012, 09:45 PM
Welcome!

Bill

firefly1957
12-12-2012, 09:59 PM
Welcome to the forum pretty good bunch here lots of information i will give you the nonstandard warnings When you get 30 posts and 30 days the pit will open for you . Religion and politics if you need blood pressure medicine you should take it before entering! Humor no eating or drinking while there we do not clean keyboards or screens! Enjoy the forum and Hello from Michigan.

x101airborne
12-12-2012, 10:36 PM
Hello, Hicks.
Welcome from the land of hot and dry!
Anything you need, you can ask. Tons of people here willing to give more than they take. Ya ever need anything, just give a shout.
Thanks for joining!

M Hicks
12-12-2012, 11:16 PM
Thanks for the welcome everyone. I'm looking forward to getting to know others and hopefully not ruining any keyboards.