lyman lubrisizer 4500

[scrat]

Question can you use any cast bullets with a lyman lubrisizer or do you have to cast with lyman molds. I lube the old way the slow way. I have been thinking of getting a lubrisizer to increase the speed of lubing and sizing. But i do not use lyman molds. Most of my molds are lee molds. Can anyone tell me if i can use a lyman lubrisizer with lee molds.

[ron brooks]

Yes, as long as you have the nose punch and the sizer die.

Ron

[9.3X62AL]

Ron nailed it--I use my Lyman 450 with Lyman, RCBS, and custom-made sizer dies with Lyman, RCBS, Lee, Mountain Molds, NEI, and SAECO molds. The top punches are also Lyman, RCBS, or custom-made. When this 450 craps out, it will likely be replaced with a RCBS unit. I prefer Lyman sizer dies, though.

[Wayne Smith]

And both the Lyman and RCBS dies fit in either machine.

[BruceB]

Not only that, but I'm getting by with only about 12 nose punches....for seventy different bullet designs!

[45 2.1]

When this 450 craps out, it will likely be replaced with a RCBS unit.

Thats not likely to happen.