Handloader magazine info WTD

[HeavyMetal]

I have another thread going on in which I am looking for 28 gauge load data.

Basically trying to save a buck by limiting trial and error load testing as much as possible.

To that end I am hoping to get copies of a couple 28 guge articles printed in Handloader mag.
HANDLOADER MAGS. #123 AND #253, SEPT. 1986 AND JUNE 2008. , both have 28 guage articles I want to see.

Don't need the mags just a print of each article. I can provide an e mail address so a slmple scan and send will be just fine.

Please PM me for the addy.

HM

[Shooter6br]

I have lwst years Handloader.Ritle and Sucessfull hunter in PDF

[HeavyMetal]

How hard is it to get that info off the dvd?

I hope it's as simple print and scan.

[cdet69]

I have a Lyman 5th edition shotgun manual with 28 guage data. I could photo copy it and mail the data you need. I might be able to scan it also but that not a guarantee. My skills with a computer are limited.

[HeavyMetal]

Cdet69
I have the Lyman 5th edition and thanks much for the offer but I was hoping to get specific articles on the 28 in hopes of seeing some info on patterning.

[Czech_too]

PM sent regarding the above.

[HeavyMetal]

Post responded to with an e mail addy PM'd to Czech too and with my thanks as well.

Hoping the Handloader 253 will show up as well.

[RayinNH]

I can supply #253 if you still need it. PM sent...Ray

[HeavyMetal]

My thanks to Ray and Brian for the response with both articles from Handloader Mag.

These will provide a good starting point for my load development, along with other info posted in the casting for shotguns thread, and I will be able to produce a nice load with out spending a ton on of money on components.

As soon as I find something I like in my Mossberg I'll post results.