32 Remington using 7.62x39 mold?

[Wyatt1]

Anybody tried this?
I have a Remington Model 8 (non tubular magazine) in .32 Remongton and modern boolit molds don't seem to exist for it. Wondering if a mold for
AK boolits would work so I can keep shooting the rifle and use spitzer boolits.

[lotech]

If the .32 Remington uses a conventional .32 caliber rifle bullet of approximately .321" or so, it won't work, or at least it won't work well. Cast 7.62x39 bullets top out at around .315". Big difference.

[w30wcf]

Wyatt,
You could try 8MM cast bullets. They would be almost ideal.

w30wcf

[JeffinNZ]

You could paper patch the 7.62X39 boolits to suit.

[bruce drake]

Buy LEE's 8mm 175gr Mold. Its a Round Nose design that will drop at the right diameter for your 32 Remington which is a primarily a rimless copy of the 32 Winchester Special.

Here is a link to one with the price under 25$
http://www.midsouthshooterssupply.com/item.asp?sku=0000690274

size it to .323 and lube and gas-check it and you'll be just fine.

Bruce

[Wyatt1]

Thanks guys! Off to by an 8mm mould...