358-125-RF and my M&P Shield

[292]

After a struggle I finally have my gun working with boolits. I found that my .357" Lee push through sizer was sizing boolits almost .358". My barrel slugged at .3555". I have settled on a .356 sizer that makes boolits .35675". I'm using 3.5 gr of Unique with 1.050" OAL. I've shot 65 so far with no leading or feed issues. Thanks to all y'all that gave advice and encouragement. My next project is hunting loads for 44 mag.

[chris in va]

Glad you got it working. My CZ would only run those at 1.01oal due to a short leade. It was reliable in my 75 though and cut clean holes.

[williamwaco]

If you are getting good results with .358 bullets, why would you want to buy a .356 sizer die?