MiHec 434215 GC Cramer HP!!!

[bcr]

This group buy is now closed!


MiHec 434215 GC Cramer HP

This is a run for the old Lyman 429215, and I will be the honcho. This will be a four cavity, brass, Cramer HP mold with GC and will drop .434". It is reputed to be very accurate at long ranges in the .44s and should be suitable for small to medium game. I expect it to be an excellent boolit for the .44 Special. The original (solid) design drops at 220 grs, so I guess it will drop 200-205 with a HP. As with all of Miha's HP designs, it should also be available with flat pins for casting solids.

The discussion thread for this is located here:

http://castboolits.gunloads.com/showthread.php?t=154193

For now assume that Miha will offer 1) large HP, 2) penta HP, 3) cup HP and 4) blank pin for flat nose. When we get near the number we need I will contact Miha to finalize pricing and details, but as the owner of several Miha molds I expect this to run $120 + $16 for each extra set of pins and $20 for shipping.

We will need 15 to commit to this buy, which we already had signed up on the discussion thread. Please list your forum name and your e-mail address in suitable form and the pin options you think you want along with the number of molds.

The drawing below was provided by 45 2.1, and it is a large, penta, and cup hollow point, as well as flat (solid).

[bcr]

Here is the list of those who have signed up:

1. bcr.....brichards aat optics dawt arizona daught edu.....one mold with all pins
2. 2 dogs.....Fcgarza0640 At hotmail DOT com.....one mold with all pins
3. bushog.....boo-haaa at Hotmail Dot com.....one mold with all pins
4. Ernest.....email in PM to bcr.....one mold with all pins
5. AlabamaEd.....Pefuehrer at knology dot net.....one mold with all pins
6. TMSCU.....Tmoyer1952@yahoo dot com.....one with all pins
7. womblrup.....womblrup at Yahoo dot com .....one mold with all pins
8. gmsharps.....gmsharps at cs dot com.....one mold, all plugs/pins
9. Whistler.....jonas.bjork84 at gmail dot com.....one mold, large pins
10. Crash87.....ktlachac at aol dot com.....one mold, large pins
11. Iron Mike Golf.....sugdenjw at msn daht com.....one mold, all pins
12. alamogunr.....alamogunr AT charter DOT net.....one mold, all pins
13. M99SavNut.....tex3rd at HotelCharlieTangoCharlie dot Net.....one mold, large HP & flat pins
14. Jason Freeman.....jasonlfreeman AT bellsouth DOT net.....one mold with all pins
15. doctorggg.....gggmmg at verizon dot net.....one mold with large HP, cup, penta and flat pins
16. foxtrotter.....foxtrotter1 at myway dot com.....one mold with penta and cup pins
17. Mike Hughes.....mike.hughes1atyahoodotcom.....one mold with large pins
18. Slow Elk 45/70.....maddenja at aol dot com....one mold with large HP and cup HP pins
19. x101Airborne.....x101airborne at yahoo dot com.....one mold with penta pins
20. badge176.....Copnursecarlson at msn dot com....one mold with large HP and cup HP pins
21. SP5315.....wmclark AT email DOT com.....one mold with all pins
22. harley45.....Eric at whitetigerblog dot com.....one mold with all pins
23. Rodfac.....DLOBERG at BELLSOUTH DOT NET.....one mold with penta and large pins
24. Nabind.....drs dot 1964 at Yahoo dott com.....one mold with all pins
25. alha.....snowserver (at) hotmail d0t com.....one mold with all pins
26. swisscast.....swisscast at bluewin dot ch.....one mold with large HP and flat pins
27. hoplite.....hoplite dot junk at comcast dot net.....one mold with large, cup and flat pins
28. ValorsMinion.....strafeology (at) g mail (dot) com.....one mold with all pins
29. HighHook.....Pvolkman3 at gmail dot com.....one mold with cup pins
30. tygar.....tbrolliniATgciDOTnet.....one mold with all HP and flat pins
31. Sniper Doc.....terryDOTpuckettATcharterDOTnet.....one mold with all pin options, plus 1 set of handles
32. Ramslammer.....namovlovATbigpondDOTcom.....one mold with large and cup point pins
33. autodidact.....jbpaul (at) suddenlink (dot) net.....one mold with all pins
34. Spillway.....1craigabrownatgmaildotcom.....one mold with all pins + handles
35. AZBrian.....sellsell(at)cox(d0t)net.....one mold with all pins
36. DEVERS454.....D . M . E . V . E . R . S . At yahoo.com.....one mold with large and penta pins
37. Nueces.....mhkilgore....at....mac....decimal....co m.....one mold with large HP and blank pins
38. taugust.....g99jeb at aol dot com.....one mold with all pins
39. TUG.....ronnieg nine seven eight 66 at yahoo dot com.....one mold with all pins
40. Master Mechanic.....tgraff at crsrents dot ca.....one mold with all pins

[2 dogs]

Fcgarza0640 At hotmail DOT com

Im in for a mold and all pins!

[bcr]

Got you 2 dogs!

[45 2.1]

The drawing you cropped has the small HP pin in it. The large and penta pins usually occupy the same space. I suggest you either add the small HP to the list and/or substitute a cup point in place of it and I will supply an updated drawing.

[bcr]

Thanks 45, do you have a preference? Large HP pins seem to be what people want on Miha molds so maybe an updated drawing would be best.

[bushog]

I'd like a mold and all 3 pin options.

boo-haaa at Hotmail Dot com

[45 2.1]

Thanks 45, do you have a preference? Large HP pins seem to be what people want on Miha molds so maybe an updated drawing would be best.

I would drop the small HP and add a cup point myself. This is a lighter for caliber boolit and would disintegrate under rifle velocities.

[Ernest]

1 mold with all plugs/pins

Ernest

[2 dogs]

Ernest, he will need your email address disguised as follows:

JohnDoe AT somewebsite DOT com

[Oreo]

2 dogs, I've been trying to contact you man. Check your PMs. Or go here (http://castboolits.gunloads.com/showthread.php?t=162371)

Sorry to OP. /Thread jack

[bcr]

45, it looks like everyone so far wants large & penta pins. Is your suggestion to add a cup point and so have large, penta, cup and flat?

[bcr]

bushog and Ernest, got you both down.

[45 2.1]

Copy and paste this image into your first post:

[AlabamaEd]

I would like one mold with all pins.

Pefuehrer at knology dot net

Thanks

[bcr]

Got you AlabamaEd.

[Cadillo]

I would like one mould with flat nose and penta pins

booliteer at yahoo dot com

[IIJSavoy]

Add me to the list - iijsep at gmail dot com

1-mold, large HP pins, extra set of flat pins

Thanks!

[bcr]

Got you both, Cadillo and IIJSavoy.

[frankenfab]

I want a 4 cavity solid......no pins

fdombek at phillipscorp.com

[jlchucker]

Put me down for a 4 cavity flat nose, no pins.

Jlchucker @yahoo.com

[crash87]

After reading 45 2.1 & bcr posts I am slightly confused. Which H.P. does it come with, The standard (would that be concidered the "small H.P." as pictured? with Flat, Cup, Lrg. H.P., Blank, or penta H.P. as an options?
Crash87

[bcr]

After reading 45 2.1 & bcr posts I am slightly confused. Which H.P. does it come with, The standard (would that be concidered the "small H.P." as pictured? with Flat, Cup, Lrg. H.P., Blank, or penta H.P. as an options?
Crash87

Hi Crash87,

Sorry for the confusion. Looking at both pictures that 45 2.1 has provided, I believe what he has drawn is a small HP and a cup HP. He indicated that the large HP would not do well at rifle velocities. I don't know if the penta HP will be compatible with small HP. I also don't know if a large HP would be good for .44 Special handgun. So I think cup and small HP for sure, don't know yet about large or penta.

[bcr]

frankenfab and jlchucker, got you both.

[45 2.1]

Sorry for the confusion. Looking at both pictures that 45 2.1 has provided, I believe what he has drawn is a small HP and a cup HP. He indicated that the large HP would not do well at rifle velocities..

No.... the large, penta and cup HPs as well blank pin options are on that drawing. The solid non HP is viable also. The cup point would work well in rifles as well as the solid.

[bcr]

Thanks for clarifying 45, I've updated the original post.

[2 dogs]

This is WAY too good of a bullet to let die on the vine. Combine that fact with Miha's quality and the problems of the undersize Lyman molds and this mold is a must have.

Sign up now. We need 6 more guys at least.

[gmsharps]

I'm in for 1 mold with all plugs/pins


gmsharps at cs dot com

[Whistler]

Wowee! I've been dying for this mold!
Since I started the original discussion interest thread it would be weird not to have one now!

4 cavity, large pins

jonas.bjork84 at gmail dot com

[bcr]

gmsharps & Whistler, got you both.

We just need four more, let's go guys!

[crash87]

I'm in, 1-mold w/ large H.P.pins.....ktlachac at aol dot com
Crash87

[bcr]

Got you Crash87.

[Iron Mike Golf]

Put me down for 1 mold, all pins

sugdenjw at msn daht com

[bcr]

Got you Iron Mike Golf.

[alamogunr]

Put me down for one mold w/all pins.

alamogunr AT charter DOT net

I'm guessing this boolet will be OK for my Browning 92 .44 mag. with slow twist bbl. Also for the S&W 696 using large HP pins.

[bcr]

I'm guessing this boolet will be OK for my Browning 92 .44 mag. with slow twist bbl. Also for the S&W 696 using large HP pins.

Got you, alamogunr.

That's funny, I'm getting this for the exact two same guns, and those aren't so common. So I hope you're right!

:drinks:

[Cadillo]

Would it be possible at this point to change my request to read one mould with flat nosed pins and large hollowpoint pins? I think that I would rather have the large hollowpoint rather than the Penta point.

Thanks!

booliteer at yahoo dot com

[bcr]

Would it be possible at this point to change my request to read one mould with flat nosed pins and large hollowpoint pins? I think that I would rather have the large hollowpoint rather than the Penta point.

Thanks!

booliteer at yahoo dot com

No problem.

[M99SavNut]

Please put me down for a 4C with large hollowpoint pins, and FN pins.

Thanx!

tex3rd at HotelCharlieTangoCharlie dot Net

[bcr]

Got you M99SavNut.

And that's 15!

[Whistler]

This is awesome.

[Cadillo]

So, are we getting close to going to press?

[2 dogs]

Patience is the key here boys. We are closer in the sense that Miha is now full time. However, the reason he is full time is because there are so many buys ahead of this one. So, the answer is yes and no.

[bcr]

2 dogs, I sent you a PM.

[bcr]

Bump. We'd like to get a few more signed up on this in case we lose anybody.

[Cadillo]

I can't understand why there is not more interest in this mould.

[alamogunr]

I can't understand why there is not more interest in this mould.

Just a guess but I think it is because most have a mindset toward heavy boolets(300+gr.) in handguns.

[Whistler]

I wish I could explain just how wickedly amazing this boolit is!
This little fella will hold 3" groups at 110 yards from a 6" S&W 629!

[Jason Freeman]

I would like one mold please.

Jason Freeman.....jasonlfreeman AT bellsouth DOT net.....one mold with all pins

Thanks

[doctorggg]

put me down for 1 mold with large hp pins and extra set of flat pins options 1&4

[doctorggg]

Why do i always forget my email address gggmmg at verizon dot net

[bcr]

Jason Freeman and doctorggg, got you both.

Up to 17. I just picked up 500 .44 Spl brass from Starline to feed my new 696, so it is going to be tough waiting for this mold!

[foxtrotter]

foxtrotter1 at myway dot com
I'll one with penta pins

[bcr]

Got you foxtrotter.

[2 dogs]

I knew this mold would be a slow starter. However, it seems the more knowledgeable 44 men are signing up for an excellent and versatile 44 bullet!

[Whistler]

Can we call it a go at 20?
I'd really like to see this into production.

[2 dogs]

No, Sorry, its active now. Miha will get to it when he gets to it. We just have to wait our turn in line. I want this one ASAP too!

[Whistler]

We're not really in line at all until we close the buy, right?

[2 dogs]

No, Miha doesnt actually close the buy until he is about to produce the mold next in line. Thats why some have been open for a year or more.

[bcr]

I sent Miha a PM and an email about this group buy, so he should be aware of it, and now we just have to sit back and be patient.

[Mike Hughes]

Please add me to the list one mold with large pins mike.hughes1atyahoodotcom
Thanks

[bcr]

Got you Mike!

[Dutch4122]

Count me in.

1 mold with cup h/p pins and blank pins for flat nosed boolits.

Dutch4122(at)yahoo(dot)com

Thanks!

[Slow Elk 45/70]

Sir , I would like to order 1 mold, W/lg HP and Cup HP pins Thank you. Jim

[bcr]

Matt & Jim - Got you both.

[x101airborne]

Is there any chance of a plain base? I did not see that option and wanted to ask.

If the answer is no, then I would still be in for a mold with penta pins. I just dont want to hassle with gas checks for 44 special loads.
x101airborne at yahoo dot com
Thanks!

[bcr]

I believe the answer is no to plain base, not enough people signed up. The idea was brought up and discussed on the discussion thread, you might want to check that; it made me change my mind from PB to GC.

I'll add you to the list!


Is there any chance of a plain base? I did not see that option and wanted to ask.

If the answer is no, then I would still be in for a mold with penta pins. I just dont want to hassle with gas checks for 44 special loads.
x101airborne at yahoo dot com
Thanks!

[alamogunr]

Bump back to the front page.

[Whistler]

Anyone got in touch with Miha? Is he aware of this buy at all?

[bcr]

Anyone got in touch with Miha? Is he aware of this buy at all?

Yes, I received the following email from him on 10/28. I wasn't quite sure what it meant, but it sounded hopeful. I emailed him as he requested two weeks later, that was a month ago, and I haven't heard anything. I'll ping him again.

"Hi,

Sorry for late reply.
I just received drawings from [45 2.1].
You can leave it open for a 14 days and then contact me again.

I will try to machine some pistol molds as fast as I can.


Kind regards,

Miha"

[bcr]

Bump to top.

[Doc65]

Don't his hollow point molds usually allow flipping the pins for flat point casting?

[badge176]

I'm in for a 4-cav with cup pins and small pins...
E Carlson ... Copnursecarlson at msn dot com

[bcr]

Don't his hollow point molds usually allow flipping the pins for flat point casting?

Yes, but unless I have misunderstood (and someone with more experience can correct me) some people prefer dedicated flat pins so that they can still rest the mold without having the HP pins sticking out the bottom.

[bcr]

I'm in for a 4-cav with cup pins and solid pins...
E Carlson ... Copnursecarlson at msn dot com

Got you, badge176.

[SP5315]

I'd like to get in on this one, Please put me down for one mold w/all pins

wmclark AT email DOT com

[bcr]

I'd like to get in on this one, Please put me down for one mold w/all pins

wmclark AT email DOT com

Got you, SP5315.

[WARD O]

Please add me to the list. I would like the cup HP pins only which should be reversible to make flat points.

wolson at rfgdistributing dot com

Thanks for running this buy.

ward

[bcr]

Got you, WARD O. My pleasure!

[Whistler]

What's the word from Miha? :)

[bcr]

What's the word from Miha? :)

I emailed him on 11/15, 12/14 and 12/28. No response. I'll keep trying, and I'll give you guys an update when I have one.

[Whistler]

Bump?

[bcr]

Bump?

Yes, bump.

[2 dogs]

I think this one will be bad to the bone if we ever see it...

[bcr]

I emailed him tonight and one month ago. I will let you guys know as soon as I hear anything back.

[bcr]

I received the following over the weekend. Not very helpful, but it sounds like at least 6 months out or so.

"Hi,


Sorry for late reply.....

I'm swamped by e-mails.
It is hard to tell any exact date, but you are on my list.
Lately I have some problems to find good cherry maker.... It takes very loooong (right now I'm waiting on chery I ordered in december 2012)


Kind regards,

Miha"

[Dwayneinfo]

Put me in for a mold with all pin options please.

Dwayneinfo at gmail dot com

[bcr]

Got you, Dwayneinfo!

[Coltman]

Please add me to the list for One 4 Cav mould with all pins .. Thanks Coltman

[Coltman]

Sorry my E-mail is randy3496 ATT gggggggggggmail DOT com

[gester01]

bcr
Do you remember the name of the file that Miha was updating (almost monthly) with available excess molds? It isn't on his website and I have forgotten where I saw it last?

[hotbrew]

Please add me to the list for One 4 Cav mould with all pins

guy.jones at gmail dot com

[alamogunr]

Let's keep this at the top. Surely there are more than have signed up that don't need 350-400 gr boolets in a .44.

[bcr]

Got you, Coltman & hotbrew.

[bcr]

bcr
Do you remember the name of the file that Miha was updating (almost monthly) with available excess molds? It isn't on his website and I have forgotten where I saw it last?

gester01, if you go to Vendor Sponsors -> MP molds you will see a link to the latest post with the list of available molds. Here's the address:

http://castboolits.gunloads.com/showthread.php?184164-Mp-Molds-Mihec-molds-on-hands-Februar-2013

[gester01]

Bcr
Thanks, that's what I wanted.

[alamogunr]

Bump! Let's not let this one die.

[harley45]

I'd be in for one 4 cav with all the pins.
Eric at whitetigerblog dot com

[bcr]

Got you, harley45.

29 so far!

[Rodfac]

Sign me up as well. Brass, .434" as cast with wheel weighte, two cavity if possible but if only a 4 cavity is produced, I'll do that instead. Penta, large pins, and blank pins if the large pins are not reversible. PLease!

DLOBERG at BELLSOUTH DOT NET

Thanks, Rod

[Nabind]

I will take one with all the pin options. Thanks

drs dot 1964 at Yahoo dott com

[bcr]

Got you, Rodfac and Nabind.

Rodfac, this will only be offered in 4 cavity.

[Coltman]

Please remove me from the list, I'm # 27 .. Thanks Coltman

[RadioactiveMarine]

One mold w/all pins please. knaack at roadrunner dot com. You can expect this to go over a year wait. I am on two other GBs to Mihec older than that.

[Dwayneinfo]

Please remove me form list I am number 26

[bcr]

List updated.

[hotbrew]

Please remove me from list - I picked up a 434-640 HP Mihec mold

26. hotbrew.....guy.jones at gmail dot com.....one mold with all pins

Thanks, hotbrew

[bcr]

Please remove me from list - I picked up a 434-640 HP Mihec mold

26. hotbrew.....guy.jones at gmail dot com.....one mold with all pins

Thanks, hotbrew

OK, hotbrew. I have that same MP mold and it is a dandy. I used 50/50 over 7.5 gr. of Unique in a .44 Spl and got picture-perfect expansion in milkjugs.

[Cadillo]

I believe that production on this buy will be predicated by Texas' secession from the Union. Until that occurs, everyone can just relax and WAIT.

[alamogunr]

Is switching this buy to NOE feasible? Everyone is so enamored (justifiably so) with Miha's molds that sometimes we forget that we have another capable mold maker available.

I'm not necessarily advocating switching, but maybe we should discuss the possibility and what concessions would have to be made.

[jlchucker]

Is switching this buy to NOE feasible? Everyone is so enamored (justifiably so) with Miha's molds that sometimes we forget that we have another capable mold maker available.

I'm not necessarily advocating switching, but maybe we should discuss the possibility and what concessions would have to be made.

I was thinking the same thing. While the mold in this group buy can be obtained with HP pins, or as a solid, my own personal interest is in a solid version like the RCBS 429215 but a bit better. It seems as though this mold maker is taking on a large share of the group-buy business, and his delivery times will only get longer and longer.

[2 dogs]

You guys are welcome to start up your own NOE buy. I am here for a Miha mold. I suspect most of the people here are going to wait the wait as well.

[alamogunr]

I would prefer a Miha mold as well, but with several GB's generating many more sign-up's than this one, I suspect that my heirs will have to take delivery of this one. I don't blame Miha for giving preference to those that can spread his development time over many molds rather than a few. He has to eat too.

I'll probably hang on but will put my anticipation on hold. I hope when it comes up for payment, that I am still able to read my emails and still have a Paypal account.

[bcr]

Guys, I'm on a few NOE group buys and they don't seem to arrive any more frequently than the Miha molds I'm waiting for. Since we already have this group buy well underway, I'm not going to switch at this point. If someone wants to start a new group buy with NOE, that's fine with me. Heck, maybe I'd sign up for both.

[alamogunr]

I'm going to stick with this GB as well. I'm signed up for a couple of others that have been going gang busters on sign-ups.Those should keep me busy until this one finally percolates to the top of the list.

[WARD O]

For nearly instant gratification, go to Accurate Moulds - He makes a great product and you can have it in your hand within two weeks of your money hitting his hand!

And you don't need a group buy or anything - check him out.

ward

[bcr]

For nearly instant gratification, go to Accurate Moulds - He makes a great product and you can have it in your hand within two weeks of your money hitting his hand!

And you don't need a group buy or anything - check him out.

ward

Quite so. I have been tempted, but no hollowpoints.

[alha]

one mold with all pins

snowserver (at) hotmail d0t com

[2 dogs]

This is such an excellent bullet with so many uses and so accurate across the board everyone really needs one.

[bcr]

Got you, alha.

[swisscast]

Please add me to the list - swisscast at bluewin dot ch

1-mold, large HP pins, extra set of flat pins

Thanks!

[bcr]

Got you, swisscast.

[Dutch4122]

Sorry, but I need to back out of this one. Please remove me from the list.

[bcr]

OK, got you Dutch.

[hoplite]

Please sign me up for one mold with large, cup and plug pins.

Thanks for running the buy.

hoplite dot junk at comcast dot net

[bcr]

Got you, hoplite.

[TMSCU]

I will take one 4 cavity mold with all pins TMSCU. Tmoyer1952@yahoo dot com. Thanks

[IIJSavoy]

Found that my .44 Mag likes a heavier bullet. Please remove me from this list. My apologies for any inconvenience.

Thanks!

[bcr]

OK IIJSavoy, no problem.

TMSCU, I put you in to IIJSavoy's place, #7, to make my life easier.

[ValorsMinion]

Please put me down for one with all pins

strafeology (at) g mail (dot) com

[bcr]

Got you, ValorsMinion.

[frankenfab]

Please remove me from this buy, thanks.

[bcr]

Please remove me from this buy, thanks.

OK, got you frankenfab.

[RadioactiveMarine]

Please drop me from this group buy. I'm doubting Mihec will ever do it since I have to other buys active nearly two years. Thanks for trying.

[HighHook]

Put me in for one with cup hp

Pvolkman3 at gmail dot com

[bcr]

Got you, RadioactiveMarine and HighHook.

[leather2]

leather2.....mrustynail2@aol.com one mold with all pins

[leather2]

I'm sorry but I will have to decline on my order for this mould. Mistake...actually need another

[Cadillo]

Life is short, thus I'll go with Lyman!

I'm pulling the plug on this pipe dream.

Count me out!

[doctorggg]

I'm #16, please add the cup HP to my order. Thank you.

[Sniper Doc]

BCR, any tally on when the order will go in or production will start? Thanks

[tygar]

I would like to get the brass 4 cavity with all pins HP & solid.
Thanks
Tom
tbrolliniATgciDOTnet

[Sniper Doc]

I'll go with one mold with one set of each of the 4 pins. I would also like to go with one of MP mold handles.
Many thanks.
Sniper Doc
terryDOTpuckettATcharterDOTnet

[bcr]

I sent an email to Miha and I will let you guys know if and when I hear from him, but he hasn't answered most of my emails in the past.

The list has been updated.

[autodidact]

Please add me to this buy as follows:

autodidact ....... jbpaul (at) suddenlink (dot) net ........... one mold with all pins

Thanks,
JB

[Ramslammer]

OK I'm next!!!
Large and cup point pins
namovlovATbigpondDOTcom

[doctorggg]

I'm #15 on the list. Please add the penta pins to make a complete set of pins.

[bcr]

List updated.

[Spillway]

One mold with all pin options, plus 1 set of handles
1craigabrownatgmaildotcom

[hanleyfan]

I will take one mold with large pins

[bcr]

hanleyfan, what's your disguised email address?

List updated.

[hanleyfan]

sorry but forgot the email, mine is adschrockatearthlinkdotnet

[AZBrian]

I'd like to get in on this one... I'll take one mold with all pin options. sellsell(at)cox(d0t)net

Thanks!

[bcr]

List updated.

[tygar]

List updated.

Any idea on when this will get started.
Thanks

[bcr]

No clue. I email Miha about this every 4 months or so and I don't get a reply.

[hanleyfan]

I need a mold, so it looks like this one will not be here very soon so I am looking else where, please take me off this buy, sorry but I just can not wait.

[DEVERS454]

D . M . E . V . E . R . S . At yahoo.com
4 cavity with large and penta pins.

[bcr]

List updated.

[Jason Freeman]

BTT, I don't want this one to die.

[jlchucker]

BCR, I'm number 7 on your list. Please remove me. I'm going to be selling the rifle that I had in mind for this mold, and I've already got the RCBS version that works just fine for boolits for my revolver. Good luck with getting Miha to produce this mold for the group buy. Thanks. JLChucker.

[womblrup]

Hi there - please sign me up for 1x 4C, .434, GC, all HP+solid casting pins, womblrup at yahoo dot com. Thanks.

[bcr]

Thread updated.

[WARD O]

Please remove me from this buy. I am considering joining the light weight 433640 buy instead as I've been having excellant results with that style of bullet. I am #22 on the list.
Thank you.

WARDO

[Whistler]

Bump.

[bcr]

Bump.

[bcr]

Bump. Happy Secession Day.

[Nueces]

One mould, with large HP and blank pins.

mhkilgore....at....mac....decimal....com

[taugust]

I'll take one with all pins

g99jeb at aol dot com

Thank you

[crash87]

Start date 9-01-2012, I hope this ones number is up soon. Its a heck of a design.

[bcr]

List updated.

[TUG]

I'll take one with all the pins.
ronnieg nine seven eight 66 at yahoo dot com
ronnie

[Master_Mechanic]

Put me down for one with all the pins tgraff at crsrents dot ca

[bcr]

List updated.

Three weeks shy of this group buy's second birthday, I give you the following quote from Miha:

"Close it and we will go into production."

Can a moderator please move this group buy into the "closed" department?

[BattleRife]

Can a moderator please move this group buy into the "closed" department?

I believe that you can do that yourself.

Take a look at 45 2.1's instructions in post #187 and see if they work for you.
http://castboolits.gunloads.com/showthread.php?138574-412640-Mihec-4-Cavity-Brass-Cramer-amp-Solid/page10

[bcr]

I believe that you can do that yourself.

Take a look at 45 2.1's instructions in post #187 and see if they work for you.
http://castboolits.gunloads.com/showthread.php?138574-412640-Mihec-4-Cavity-Brass-Cramer-amp-Solid/page10

I don't seem to have that option.

[bcr]

This group buy is now . . .

CLOSED!!!!!

[jason f]

any chance of getting in on this still?

[bcr]

You'll have to PM Miha and ask. I can add you to the list if he OKs it, but he told me to close the buy.


any chance of getting in on this still?

[crash87]

Has payment requests gone out on this one yet?
Crash87

[bcr]

Has payment requests gone out on this one yet?
Crash87

No, he just told me to close the buy two weeks ago, so I think it usually takes a month or two to order the tooling, fabricate the molds, and send out payment requests. That's just my guess based on past, non-honcho experience with 6 or 8 of his molds.

[TUG]

I also was wondering. My first group buy to be in and did not want to miss out!
ronnie

[crash87]

Thanks was just curious. One has t keep track of things as the cyber world sometimes mis-places emails and such.
I dont know why this would be, as we live in, what some believe, such a perfect world. One that also needs a little/lot of housecleaning.
Sorry I couldnt help it, LOL

[bcr]

Folks, I just got a PM from Miha that the molds are ready to ship, so please be on the lookout for the payment notification email.

Hooray!

[MiHec]

PayPals are out!

[TUG]

Payment sent!
ronnie

[womblrup]

just paid.

[alamogunr]

Just sent payment. I was beginning to think this would never happen.

[Nueces]

I haven't seen an invoice yet. PM inquiry sent to Miha this morning. Do not want to miss out!

Update: invoice received and paid.

[SP5315]

Payment sent.

[funshooter]

Payment sent as well

[AZBrian]

Payment sent - thx!!

[doctorggg]

Payment sent. Thanks Miha

[Ramslammer]

Paid for mine

[tygar]

PayPals are out!

When do you think you will be shipping these?

[SP5315]

When do you think you will be shipping these?

From my past experience, after Mihec receives payment the molds usually show up in about 10-14 days latter.

[MiHec]

When do you think you will be shipping these?


I all ways ship next day if possible (weekend not apply) ;)

[tygar]

I all ways ship next day if possible (weekend not apply) ;)

I see people say they paid. Is that required or the fact that I paid on the 23rd via PP enough? If not, I paid.

[alamogunr]

I see people say they paid. Is that required or the fact that I paid on the 23rd via PP enough? If not, I paid.

Not required. Just a way to increase post count.:mrgreen:

[badge176]

I paid, and don't give a fig about my post count...

[Nueces]

I paid and the lovely thing arrived today.

It is a sadness to waste pixels, but some things simply must be said. :mrgreen:

[Whistler]

Truly a beauty!

(click for larger pics)
118766
118767