MiHec .375 H&H HP GC Boolit - 2 or 4 Cavity Brass Cramer or Solid

[45 2.1]

MiHec .375 H&H HP GC Boolit - 2 or 4 Cavity Brass Cramer or Solid This is a run of a boolit design out of BRPs catalog. This will be a two or four cavity, cramer or solid brass GCHP mold that is suitable for the 375 caliber rifles. It will cast at 0.378" diameter which will probably be 0.3785" or so as cast. The weight was about 275 gr as a solid. The following is the discussion thread.

http://castboolits.gunloads.com/showthread.php?t=148218

We will need fifteen to commit to this. We will run this until we get the number we need or more.

Pin options include: 1) large round HP, 2) cup nose HP 3) blank pin for solid with no HP pins sticking out the bottom on a reversed HP pin

For the two cavity mold: The price for the cramer is $90 with one set of pins included plus $8 for the extra pin sets if wanted plus $15 shipping. The price for the solid version is $75 plus $15 for shipping

For the four cavity mold: The price for the cramer is $120 with one set of pins included plus $16 for the extra pin sets if wanted plus $20 shipping. The price for the solid version is $90 plus $20 for shipping

If the HP pins are not suitable for reversal to a solid, the blank pins come with the price of the mold. If you do not want the HP pin sticking out of the base of the mold, in the case of reversable pins, you can order a set of blank pins for a smooth mold bottom.

Prices confirmed by MiHec.........................

Please list your Forum name and your e-mail address in disguised form, the number of 2 or 4 cavity molds you want, type: cramer HP or solid and pin options if applicable.

Interest and sign up list:
1. Rockrat.....Papa Alpha Victor Papa at montrose dot net.....(use capital letters only on first part of address).....One four cavity solid
2. Rattlesnake Charlie.....charles uunderrscoree nuss aaat yaaho dat coom..... One two cavity cramer with all pins
3. lup.....Rstaab at Panix dot com.....One two cavity cramer with large & cup HP pins
4. Leadmelter.....mripiech at msn dot com.....One two cavity cramer with all pins
5. btroj.....Bdtrojan at cox dot net.....
One two cavity cramer with large & cup HP pins
6. sffar.....cheeseburgerfriesandshake AT yahoo DOT com.....
One two cavity cramer with cup HP and blank pins
7. CATS.....PM CATS for e-mail address.....One two cavity cramer with all pins
8. Nrut.....76Flatdec (at) hotmail (dot) com..... One two cavity cramer with all pins
9. Aaron.....5090shiloh at gmaildotcom.....One four cavity cramer with all pins
10.akmac.....twomoose at alaska dot net..... One two cavity cramer with all pins
11.Ozarklongshot.....Stoneaxe42 at yahoo dot com.....
One two cavity cramer with large HP pins
12.Ed In North Texas.....efhaertel at embarqmail dot com.....
One two cavity cramer with cup HP and blank pins
13.Ron.D.....(ron-d678 AT hotmail dot com).....One two cavity cramer with cup HP pins
14.zac0419.....zac0419 at gmail dot com.....One four cavity cramer with cup HP and large HP pins
15.ghope.....greg hope 1 (lower case, no spaces) at hot mail dot
com..... One two cavity cramer with large & cup HP pins
16.twiggs1.....toyon.wiggs at gmail..... One four cavity cramer with all pins
17.8mm.....mhaley7030at aol dot com.....One two cavity cramer with all pins
18. 725.....mulliganm121 at aol dot com..... One two cavity solid
19. midnight.....rwhyte at wi dot rr dot com.....One two cavity cramer with cup HP and blank pins
20. FLYCUTTER.....r underscorekarkatattdotnet.....One four cavity cramer with all pins
21. JFE.....jfe (dot) oz (at) optusnet (dot) com (dot) au.....One two cavity cramer with all pins
22. Leftiye.....tango golf romeo ate mambo snake nurse.....One two cavity with cup nose HP pin.
23. gmsharps.....gmsharps at cs dot com..... One two cavity cramer with cup HP and blank pins
24. bfuller14.....bfuller 0ne nine six one AT sbcglobal DOT net.....One two cavity cramer with all pins
25. bushog.....Bushog......boo-haaa at hotmail dot com..... One two cavity cramer with all pins
26. 375RUGER.....huntmanzanos (at) gmail (dot) com..... One two cavity cramer with cup HP and blank pins
27. Elkins45.....Elkins (at) iglou {dot} com.....One two cavity cramer with large HP pins
28. Down South.....swactor at ymail dot com.....One two cavity cramer with all pins
29. Beau Cassidy.....o rt ho NP B e a u at..yahoocom.....One two cavity cramer with large and cup HP pins
30. hamour.....hank (underscore) austin (at) msn (dot) com.....One two cavity cramer with all pins
31. micky blue.....bowtied (underscore) micky AT yahoo.....One two cavity cramer with all pins
32. wool1.....wwoolson68 (at) gmail (dot) com.....One two cavity cramer with large and cup HP pins
33.

[Rattlesnake Charlie]

45 2.1, thanks for taking this over. I'm just currently overwhelmed with moving and looking for a new job.

And, since your posting just a short time ago, I've gotten word that some feral hogs in SE New Mexico have now put a hit out on me.

2-cavity, all pin options, including for a solid.

[sffar]

45 2.1,
I'll go with the 2C cup point with a set of blank pins.
cheeseburgerfriesandshake AT yahoo DOT com
Thanks,
Sam

[btroj]

I am in for a 2 cav Cramer with large round and cup point HP pins. I would prefer it drop at .378

Bdtrojan at cox dot net

I would be interested in seeing how big the different styles of HP cavities are. Not a big deal, more just curious.

[ghope]

Put me down for a 2C with both hp pin sets @ .378". I can always punch it down to .377 later if that works better in my Whitworth.

greg hope 1 (lower case, no spaces) at hot mail dot com

[twiggs1]

I would take a 4 cavity with all pin sets

toyon.wiggs at gmail

[8mm]

I am in for a 2 cavity, cup hollow point pins @.378.

mhaley7030at aol dot com

[johnny356ER]

Count me in for a 2 cavity HP mould with all pin sets @ .378
Thanks, johnny356ER
johnandsuzi at msn dot com

[Ozarklongshot]

info for #11
2 cav, large round pins
Stoneaxe42 at yahoo dot com

Thank you sir
This will make 8 mihec molds for me. Woooo Hoooo

[Ron.D]

Please make mine 2 cavity with cup point. (ron-d678@hotmail dot com) any extra charge for shipping to Canada??

[45 2.1]

any extra charge for shipping to Canada??

I don't think so.

[JFE]

45 2.1 - would it be possible to see the dimensions of the bullet for anyone looking to use this for some other 375 application. Thinking whether it might be suitable for the 375 Win and use a Lee FCD for the crimping.

[725]

I'd like to get in on 2 cavity solid. Sign me up, coach.

[45 2.1]

I'd like to get in on 2 cavity solid. Sign me up, coach.

I need your disguised e-mail address. Take a look at the list and you'll understand.


45 2.1 - would it be possible to see the dimensions of the bullet for anyone looking to use this for some other 375 application. Thinking whether it might be suitable for the 375 Win and use a Lee FCD for the crimping.

Should work fine in the 375 Win.

[725]

45 2.1
For the 2 cavity, solid mould, here is the email:

mulliganm121 at aol dot com

Thanks, 725

[Ed in North Texas]

Now that we've settled on weight, I'll go with the 2 cavity cup point with extra blank pins.

Ed

[midnight]

Put me down for one 2 cavity, .378, with cup point and blank pins, brass. rwhyte at wi dot rr dot com

Bob

[CATS]

Can we get one of these to drop WW at .379 ?

[gester01]

45 2.1
(If you're still keepin track, I'd prefer the 0.378")

gester01 charleyr01atattdotnet 4 cavity Cramer with large round pins

This buy is still on, yes?

[45 2.1]

Can we get one of these to drop WW at .379 ?


If you're still keepin track, I'd prefer the 0.378". This buy is still on, yes?

OK guys........ i'm going to recommend MiHec cut these so they will deliver a boolit a little over 0.378" ( which probably means 0.3785" as cast). A high antimony WW alloy will age larger if you let it sit unsized after casting so some of you have that option for a slightly larger boolit. That boolit growing in diameter depends on alloy and temperature its cast at. Water dropping them at that time helps on that.

And Yes, this GB is still ongoing.

[FLYCUTTER]

I'd like to get in on this. A 4 cavity Cramer with solid and cup pins preferably .378"
Thanks, Bob
r underscorekarkatattdotnet

[lup]

One 2 cavity Cramer style mould with both pins.

Rstaab at Panix dot com

[FLYCUTTER]

I would like to edit my post (21) on my e-mail address. It is r underscorekarkatattdotnet

[WKAYE]

Please put me down for a 2 cavity mould with Cup Pt. pins. Thanks.
nkaye(@)nbnet(dot)nb(dot)ca

[gester01]

45 2.1 I am going to have to withdraw from this group buy - just realized it wasn't what I was looking for after all.

[captaint]

Need to go ahead and get my end going. I would like one 2 cav mold with one set of round pins.
roctober5thatgmaileddotcom. enjoy Mike

[Rattlesnake Charlie]

45 2.1
Thanks for running this. Looks like I'll be heading out for NE Kansas for a 6-month gig at Wolf Creek Nuclear Generating Station. It will be good to be getting a paycheck again. Now, I can buy more bullet molds!
Rattlesnake Charlie

[45 2.1]

Your Welcome Charlie.... Good Luck on the new job....:D

[akmac]

I'll take a Cramer 2 cavity with both sets of pins.
email is twomoose at alaska dot net

[45 2.1]

I'll take a Cramer 2 cavity with both sets of pins.
email is twomoose at alaska dot net

There are three sets of pins. Which two do you mean?
1) large round HP, 2) cup nose HP, 3) blank pin for solid

[akmac]

Lets make that all three pin types, thanks.

[Leadmelter]

I will take a two cavity mold with all pins for my 375 Win Tc barrel
Thanks
mripiech at msn dot com
alternative email gpiech at cavtel dot net
Thanks!!

[rockrat]

4 cavity solid

Rockrat----------Papa Alpha Victor Papa at montrose dot net -------- use capital letters only on first part of address

[leftiye]

Two cavity with cup nose pin.

Leftiye ----- tango golf romeo ate mambo snake nurse

Danka mucho!

[captaint]

Apologies, fellas. Need to get my name off this list. My needs are actually for a mold that will cast like .381. I was thinkin of this for my 38-55 and the boolits that work well in that rifle are coming out of the mold at .381 and getting sized to .3795. So......maybe next time. enjoy Mike

[zac0419]

I"m in for a 4 cav Cramer, two sets of pins. Cup and large-round.

zac0419 at gmail dot com

[gmsharps]

One two cavity cramer with cup HP and blank pins
gmsharps at cs dot com

Thanks,
gmsharps

[Aaron]

Add me please. Four cavity all pins

5090shiloh at gmaildotcom

Thanks

Aaron

[johnny356ER]

45 2.1

I'm sorry, but I'm going to have to withdraw from this buy...
I no longer own the rifle this was intended for.

Thanks,
Johnny

[bfuller14]

45 2.1 If it is not to late I would like a 2 cavity with all pins please.
bfuller 0ne nine six one @ sbcglobal.net

[bushog]

Please add me for a 2 cavity with all pin options.

Bushog......boo-haaa at hotmail dot com

[375RUGER]

Please put me in for (1) 2C cramer mould w/ cup HP and blank pins huntmanzanos (at) gmail (dot) com

[FLYCUTTER]

I'm #20 in the list and would like to change my order to "All Pins" for this mold. Thank You !

[Nrut]

I'll take 2 cav. all pins.
76Flatdec (at) hotmail (dot) com

[Elkins45]

Sign me up for a two cavity with the large HP pins please.

Elkins (at) iglou {dot} com

[Down South]

Put me down for a two cavity with all three sets of pins.
swactor at ymail dot com

I want to try this boolit in my Marlin Lever 375 Winchester. I do believe it will work.

[8mm]

I am #17 on the list and would like to change my order to include all pins.

Thank you

[crash87]

45 2.1,
Put me in for a
1- two cavity cramer with cup HP
ktlachac At aol Dot com
Thanks
Crash87

[hamour]

Please put me down for a 2 cavity mold with all pin options.

hank (underscore) austin (at) msn (dot) com

[Beau Cassidy]

As if I need more molds and bullets to cast.... I have a nice model 70 stainless .375 that would like this one. Better put me down for a 2 banger with cup and HP pins.

o rt ho NP B e a u
at..
yahoocom

Can we make sure the gas check shank is appropriately cut for a Hornady GC? Having one too large like the 462 Hammer mold would be a pain.

[JFE]

please put me down for a 2 cavity mould with all pins.

jfe (dot) oz (at) optusnet (dot) com (dot) au

thanks.

[45 2.1]

Can we make sure the gas check shank is appropriately cut for a Hornady GC?

We'll surely try for that.

Thread updated.........

[crash87]

45 2.1<
I'm afraid I'm going to have to bow out of this one, #29 on the list. Thank you,
Crash87

[ghope]

45 2.1,
Do we have a timeline yet for manufacture?

[WKAYE]

Please remove me from the list. H&H traded off.
Thanks.

[45 2.1]

45 2.1, Do we have a timeline yet for manufacture?

Not Yet..............

Thread updated...............

[punkerdood]

Add me in for all pin 2 cavity, please. majpatmcd AT gmail.com

[hamour]

Any idea when this one might run?

[micky_blue]

Can I get a two cav with all pins please.

bowtied (underscore) micky AT yahoo

thanks
micky

[wool1]

if the buy is still open.....

id like a two cavity cramer hp with both hp pins

wwoolson68 (at) gmail (dot) com

[45 2.1]

Any idea when this one might run?

Not Yet..............Closing date not known.

Thread updated...............

[punkerdood]

take me off the list, please #31 looks like I'll be shooting 30.06 rather than 375h7h

[725]

Coming up on a year wait. Any idea about production schedule?

[45 2.1]

Coming up on a year wait. Any idea about production schedule?

Nothing known about when yet..............

Thread updated...............