View Full Version : RCBS Load data/147 9mm
07-05-2005, 10:42 AM
Does anyone have any rcbs load data for their 147 cast bullet in the 9mm. The reason I ask is that bullet requires very deep seating in my HiPower due to the short throat. I called RCBS today but they are closed all this week. I also want to extrapolate to a 135 swc that requires the same seating depth that I got from Mastercast. Thanks in advance. Nick
07-05-2005, 02:33 PM
fecmech- I'm loading the RCBS-147-FN sized .356 and FWFL over 3.4 gr. Tightgroup, seated to 1.110". Never clocked it but it is a rather mild load.
07-05-2005, 02:53 PM
Jim--If I could load that long I'd use most any 147 data but my HiPower throat forces me to seat almost all the bullet bearing surface into the case with an oal of about 1.040. I'm guessing that RCBS may have done their load development at that oal, I hope so anyway. Thanks Nick
Powered by vBulletin® Version 4.2.1 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.