frank_1947
05-16-2012, 04:59 PM
We have several thousand ready to ship all Federal once fired brass from our indoor range, this brass has been run through a Case Pro Machine , then full legth sized, primer removed, then cleaned and polished.
$50 per 1000 plus $13 Shipping Total $63
Check out all our products.
http://shop.topgunss.com/Processed-Pistol-Brass_c33.htm
For those who may not know about a case pro machine, this is what it does and why.
In a Glock and other pistols that have a non-support barrel they will put a bulge in the bottom of the case when you try to run this brass through a 1911 it will jam, the case pro removes that bulge then it still needs to be full lenght sized, the 40SW is the worst for this due to high pressure, second is 9mm not as bad, they are the only two calibers that serious competition shooters do this to.
Trust me I know, I was ahead in a match several years back, one stage to go and I would win the Ill Sectional in my class , being in a hurry and loaded additional brass that was not rolled, my gun jammed tight, couldnt get it loose had to call time, from first place to last, all for the brass.
Even if your not a competition shooter there is nothing worse then a gun to jam or Failure to feed this brass will end that problem.
We will list 9mm soon also, if your 9mm has feeding issues this could be the cure it was for my nine in avatar
$50 per 1000 plus $13 Shipping Total $63
Check out all our products.
http://shop.topgunss.com/Processed-Pistol-Brass_c33.htm
For those who may not know about a case pro machine, this is what it does and why.
In a Glock and other pistols that have a non-support barrel they will put a bulge in the bottom of the case when you try to run this brass through a 1911 it will jam, the case pro removes that bulge then it still needs to be full lenght sized, the 40SW is the worst for this due to high pressure, second is 9mm not as bad, they are the only two calibers that serious competition shooters do this to.
Trust me I know, I was ahead in a match several years back, one stage to go and I would win the Ill Sectional in my class , being in a hurry and loaded additional brass that was not rolled, my gun jammed tight, couldnt get it loose had to call time, from first place to last, all for the brass.
Even if your not a competition shooter there is nothing worse then a gun to jam or Failure to feed this brass will end that problem.
We will list 9mm soon also, if your 9mm has feeding issues this could be the cure it was for my nine in avatar