Mold Drops Oversized Boolits (358429)

[TCLouis]

Boolits drop at 0.368" from my alloy. Pretty, but oversized.

The same alloy in 358156 casts right on so it is not an alloy issue.
Bought the mold used so I am not sure if Lyman will take it back.

To bad there is not a use for a boolit that diameter

[johnly]

Maybe someone is looking for a light bullet plinking bullet for their 9.3mm rifle. Might be worth asking. I have a 9.3x57mm, but I'm already taken care of.

John

[TCLouis]

I had no idea what the 0.368" corresponds to.

Nothing I own unfortunately.

Not sure 9.3 owners are looking for light plinker boolits and that the twist in their guns would stabilize a "short" boolit

[Bret4207]

I'd offer to trade the mould as long as they're uniformly round at that size. Chances are there's someone here looking for a "Fat 38" for a specific gun. It'd work in my 38 S+W, but I don't get enough shooting in these days to bother with more moulds.