bgokk
05-06-2012, 07:20 PM
I recently bought about 75# of scrap lead from a recycler @ $0.25 a pound. There was a large amount of battery cable clamps in the bucket.
When I went through the WW's with the dikes I also tried them on the cable ends. The cable ends seemed softer than the lead WWs. When I melt them should I consider them pure lead? They seemed very soft.
I found 1 that was either brass or copper.
I am open to suggestions!
When I went through the WW's with the dikes I also tried them on the cable ends. The cable ends seemed softer than the lead WWs. When I melt them should I consider them pure lead? They seemed very soft.
I found 1 that was either brass or copper.
I am open to suggestions!