Felix, this is Houston, over!

[Jim]

Felix, gotta question fer ya!
I have a 7.65(.32) caliber pocket revolver. The factory ammo boolits weigh in at 88 grains. I have a .311 round ball mold mold that throws a 45 grain ball. How much Unique would I need to push a RB at 900 to 1K FPS?

Thanks,

[felix]

Jim, this is a Deputy Al question because he would know the normal loadings for the cartridge. Starting from scratch, I would load the very same as for the regular boolit, and work down to where accuracy was acceptable. Use the powders in the loading books, if none there for Unique. Do not go below starting loads unless you increase the powder speed as indicated in the books. Unique would be the slowest to use unless Deputy Al states otherwise. ... felix

[Jim]

Felix,
Thanks, Bud! I'll see if I can get hold of Al and check him out on this.

[TAWILDCATT]

93gr bullet /2.2 gr bullseye.check loading manual
when in doubt read the directions:Fire: :Fire: