Had a cast session yesterday

[JSlack]

We did 2000 Lee 401-175-TC and 1400 Lee 452-200-RF
We weighed our take for the day and we went through about 100 lbs of lead.

was a good day, but now I have a lot of bullets to size and lube!

http://castboolits.gunloads.com/imagehosting/thum_222494f5cd41541b9f.jpg (http://castboolits.gunloads.com/vbimghost.php?do=displayimg&imgid=4373)

http://castboolits.gunloads.com/imagehosting/thum_222494f5cd43017cd8.jpg (http://castboolits.gunloads.com/vbimghost.php?do=displayimg&imgid=4374)

[mold maker]

Are you sure they need to be sized??
lube, load, and shoot if they arent too big.

[williamwaco]

Size 'em.

You will ultimately regret it if you don't.

[JSlack]

I have a lyman lubrisizer, so I may as well size em ;)

[ku4hx]

I have a lyman lubrisizer, so I may as well size em ;)

Size and lube enough for a test batch of each boolit you cast. You can always size them smaller if you need but going the other way is not so easy.

You also can load a few dummy rounds of unsized boolits and see if they chamber properly. If they do, a few test rounds using unsized boolits might be in order.

[Blammer]

sounds like time for a Star sizer