Can Someone Post a Pic of a 311366 ?

[Hamish]

I have hunted for hours. I'm hoping someone can download a picture of

a Lyman 311366. I'm told it is a Loverin type boolit.

Thanks

[462]

Are you sure of that number? Could it be a 311466, instead? If so, I'd be glad to post a picture.

Edit to add: Go here, no 311366, though. http://www.three-peaks.net/bullet_molds.htm

[Hamish]

I have wondered, but I have found 5 different posts here on CB regarding a 366. The 311466
is also a Loverin, correct?

[runfiverun]

311466 is a loverign gas check design.
i have a nei copy you need a big throat for it to work.
i use it in my 30-30 savage bolt gun.
it will work in the 7.7 jap and in some other mil rifles too if you get one to pour big enough.

[Hamish]

The mysterious 311366 *is* actually 466, it's funny how a series of misteps will take you funny places.

462, the Buffalo chart is'nt bad, but here's one on Castpic.s:

http://www.castpics.net/subsite/HistMolds/default.html

Thanks for responding fella's!

[Frank]

What are you shooting it in? Getting the boolits fitted to the throats is important with cast.

[Hamish]

In discussing boolits in the area of 150 grains, it was opined that this was a very good design, not much taked about here.

At this point, calibers in house are:

30-30; Contender and Lever, M-1, SMLE, MN.

[beagle]

Yep, has to be a missprint somewhere. The #366 cherry was a 323 bullet./beagle

[Larry Gibson]

Here's your basic 311466. One on the right has the 1st 2 driving bands sized to .300.

Larry Gibson