NOE 322 180Gr. FN SR

[SwedeNelson]

NOE 322 180Gr. FN SR
Here is the link to the discussion thread:
http://castboolits.gunloads.com/showthread.php?t=140509

http://i69.photobucket.com/albums/i80/swedenelson/1111-204-322180GrFNSRPB.jpg

15 orders and we will get this buy on the schedule.
We will keep the buy open 2 or 3 weeks before the date on the schedule.
At that time we will close the buy and send out a PM with
a request for payment. We don’t require payment before then.

Prices will be as follows:
Single cavity mould $68.00 Ea.
Double cavity mould $72.00 Ea.
Three cavity mould $79.00 Ea.
Four cavity mould $85.00 Ea.
Five cavity mould $92.00 Ea.
Plus $10.00 Shipping/Handling.
Foreign orders are a additional $10.00 Shipping/Handling.
Prices are subject to change at any time.

You can mix number of cavities in an order to make 15.
We will offer PB only on this bullet.

Use LEE Commercial 6-Cavity handles (not included).
Lyman, RCBS type top punch furnished with each mould
as well as a sample of Bull Plate sprue plate lube.
Moulds are machined from 2024 Aluminum
Used for high strength structural and aircraft applications.
Tensile strength range 30,000 to 63,000 psi
Sprue plate (blued), alignment pins, and hardware will be
carbon steel.

Hollow pointing one cavity and furnishing a double
ended pin with pin holder would be $35.00 Extra

We will accept Checks, Money Orders and Pay-Pal
Pay-Pal requires a 3.5% sir-charge.
Pay-Pal account:
pbsco1@qwestoffice.net
Make checks and money orders out to:
NOE Bullet Moulds

Our mailing address is:
NOE Bullet Moulds
1645 W 150 N
Provo, Utah 84601
801 377-7289


Thank you for your interest in this buy.
Swede Nelson

[SwedeNelson]

List of orders
1 shawnsmc 2 cavity
2 John Boy 2 cavity
3 Idaho Sharpshooter 4 cavity
4 adrians 2 cavity
5 Plastikosmd 2 cavity
6 drmaynard3235 (pc) 2 cavity drilled for temp probe.
7 drmaynard3235 (vh) 1 cavity
8 drmaynard3235 (sm) 1 cavity
9 drmaynard3235 (aw) 1 cavity
10 drmaynard3235 (gd) 1 cavity
11 drmaynard3235 (gd) 1 cavity
12 drmaynard3235 (gs) 2 cavity
13 the other DWS 2 cavity
14 aimhigh 2 cavity
15 gandydancer 2 cavity
16 x101airborne 3 cavity w/HP drill for probe
17 moodyholler 2 cavity
18 whirligimike 2 cavity
19 dromia 4 cavity drill for probe
20 Doc65 3 cavity w/HP
21 725 1 cavity
22 JimofAZ 2 cavity
23 stractor 3 cavity
24 Hamish 2 cavity
25
26

Thanks
Swede Nelson

[shawnsmc]

Looks interesting I'll take a 2 cavity

[Idaho Sharpshooter]

Are we going to be able to "shrink" the boolet diameter down around .319" so it will work in the GEWEHR 88 rifles with the small bore 8mm?

Rich

[SwedeNelson]

Rich

Tried one of the sample bullets in my pristine GEW88 with a .319 bore.
Kind of neat, you can thumb seat them and they fill the throat just about perfect.
Close the bolt with just a little resistance and open it and it extracted with the bullet in the case.
Tried them in a M-48 and the stop ring gets pushed hard in to the case, but still extracted with the bullet in the case.
Wish I had some more to load and shoot.

Swede Nelson

[drmaynard3235]

Al
I'm happy that this mold has made it to the active buy list.
To bad the tooling did not work out for the hollow base.
Could this be also offered in brass for additional money?
I will have my interested parties confirm their wanting one and add to the buy list. My source of this bullet thinks he may have a stash if so will send you some more to try.
Could this be scaled for 30 cal and 303 ? If not this time maybe another time.
Thank You
Pres
drmaynard3235

[SwedeNelson]

drmaynard3235

We could do brass but we would need 15 orders of each (aluminum and brass)
to cover the cost of the tooling for each.
If we make the tooling right we could run other sizes, but at this time with the work load like it is we will only be offering one size.
Thanks for the offer of some more bullets.
Would be more than happy to cover any costs.

Swede Nelson

[John Boy]

John Boy - in for 1 double cavity
Thanks Kindly

[Idaho Sharpshooter]

Swede,

you convinced me. Stick me on the list for a 4-cavity.

Rich

[Duett]

I will take one double cavity mould!

Thank you!

[adrians]

Hi Swede,
Put me down for a 2 cav please.
adrians.

[SwedeNelson]

Updated list

Thank you for the orders.
Swede Nelson

[Plastikosmd]

put me down for a double cavity also please

[the other DWS]

please put me down for one for the 2 cavity versions as well,

still hoping for the K-31 w/o the gas check

[drmaynard3235]

Swede
Here is my list to be added.
drmaynard3235 pc a 2cav drilled for temp probe.
drmaynard3235 vh a 1cav
drmaynard3235 sm a 1cav
drmaynard3235 aw a 1cav
drmaynard3235 gd two 1cav
drmaynard3235 gs a 2cav
Maybe more.
Thanks
drmaynard

[mike65]

Swede,
I'd like a single cavity.
Mike65

[SwedeNelson]

Have 15 orders and we are on the scheduale.

drmaynard3235
A group buy with in a group buy - COOL.

Thanks for the orders.

[gandydancer]

Hello Al. put me down for a 2 cavity. gandydancer

[x101airborne]

Ich bin ein!
3 cav, hollow point one cav. drill for probe.
x101airborne at yahoo dot com

[moodyholler]

2 cacivty please!! moodyholler

[drmaynard3235]

Swede
A small change within the group buy within the group buy.
#11 drmaynard3235gb 1 cav drill for probe
#12 drmaynard3235gb change to 2 cav drill for probe.
Thanks
drmaynard

[dromia]

Four cavity, drill for probe please. :)

[358wcf]

Al-
Please put me down for a 1 cavity mold if you will! Outstanding, as always!!!
Chuck
358wcf

[dromia]

Are we on the schedule now Al?

[SwedeNelson]

Updated list
Bump

Thanks
Swede Nelson

[aimhigh]

Hi, Swede, Bob L here. #16 on the list. Please change to user name. Thanks

[whirligigmike]

Please count me in for ONE - Two Cavity Mold

Thanx, Mike

[mike65]

Status?

[the other DWS]

I'm new to this process, how, who, when, etc do I pay? how do we check status on the group order. I'm afraid I might get lost or left out by my error.

[Plastikosmd]

I think we are gonna get a pm at some point, not sure how long the delay normally is

[drmaynard3235]

This group buy is on the schedule for the second week of April 2013.

"We will keep the buy open 2 or 3 weeks before the date on the schedule.
At that time we will close the buy and send out a PM with
a request for payment. We don’t require payment before then."

drmaynard3235

[SwedeNelson]

Updated list
Bump

Thanks
Swede Nelson

[Chicken Thief]

I would like to order a 3 cavity with 1 hollowpoint, please

[SwedeNelson]

Updated list
Bump

Thanks
Swede Nelson

[Chicken Thief]

So SwedeNelson what is ETA?

[Chicken Thief]

http://i295.photobucket.com/albums/mm153/Chickenthief/Blandet/Smilere/anyone.gif

[Chicken Thief]

Yikes!
I just discovered that ETA is 1year+.
Swede can you scratch me from the list please?

[SwedeNelson]

Updated list
Bump

Swede Nelson

[SwedeNelson]

Checked list

Bump

UPDATED SEE BELOW

Thanks
Swede Nelson

[SwedeNelson]

Doing a update
Will try to keep all buys current on the schedule:
http://castboolits.gunloads.com/showthread.php?t=142415
If you have questions about our policy you can see it here:
http://castboolits.gunloads.com/showthread.php?t=156593

Bump

Swede Nelson

[SwedeNelson]

Cheked list

Bump

Swede Nelson

[Duett]

Unfortunately I will have to withdraw from this group buy. Please remove my name from the list.

Duett

[mike65]

Swede,
The guy that I was buying this mold for just passed away so I have to cancel.
sorry,
Mike

[dromia]

Al I don't seem to be on the list. :roll:

[SwedeNelson]

dromia

Sorry about that good friend
Done

Swede Nelson

[SwedeNelson]

Bump

Swede Nelson

[SwedeNelson]

Bump

Swede Nelson

[ShooterOnTheLine]

Did the buy get completed? How did the molds turn out? Has anyone Shot this round in a 32?

[drmaynard3235]

ShoterOnTheLine
This group buy is still on the list. Anyone interested please sign on. a higher buy count will
help an earlier delivery.
I have shot a few of the original design in a 8.15x46R that showed promise. Did not have
enough to work up a best load.
Drmaynard

[SwedeNelson]

Bump

Swede Nelson

[stractor]

Is the buy still going on and if so how do I join it. I would like a 2 cavity
Thanks
Bob

[jimofaz]

re: NOE 322 180Gr. FN SR
I'd like a 2 cavity
jimofaz

[Plastikosmd]

Coming up on a year, is this still a work in progress?

[725]

Al,
Sign me up for a single cavity.

[725]

Al,
I don't seem to be listed in the master list. Need an up-date to see where we stand and how long this one will take. :)

[drmaynard3235]

bumpitybump

[Doc65]

I'd be interested in a 3 cav with 1 HP if this ever gets moving, I don't think it is even showing on the schedule at this point. It would be EVEN better in brass.

[drmaynard3235]

bump!!!

[725]

HEY! I'm still not listed on page one.!! Don't forget me.

[SwedeNelson]

Updated list

Bump
This buy is alive and well
The schedule is moving forward!

Swede

[725]

Outstanding. Thanks, Swede.

[drmaynard3235]

bump...

[Hamish]

Al,

Hamish 2C popeye91 at frontier dot com

Thank you sir.

[drmaynard3235]

I have followed an interesting GB and jumped in when the buy is closing notice is posted, I have also jumped in early. Al is getting the GB backlog under controll and production is speeding up.
Their have been over 5000 views of this thread. If 10 interested but on the fence potential buyers
jumped onboard I think we could make a large jump into the production schedule time line.
drmaynard

[drmaynard3235]

bump !!!!

[drmaynard3235]

bump!!!!!!

[drmaynard3235]

bump!!!!!

[drmaynard3235]

bump!!!!!!

[SwedeNelson]

Updated list
Bump

Swede Nelson

[drmaynard3235]

bump!!!!!!!!

[aimhigh]

Glad to see that it made it to the production list. Hope to see it soon! Thanks!

[drmaynard3235]

bump!!!!!!