NOE 454 350Gr. RF

[SwedeNelson]

NOE 454 350Gr. RF
Here is the link to the discussion thread:
http://castboolits.gunloads.com/showthread.php?t=131510

http://i69.photobucket.com/albums/i80/swedenelson/NOE_Bullet_Moulds_454_350Gr_RF.jpg

http://i69.photobucket.com/albums/i80/swedenelson/1111-180-454350grRF-1.jpg

http://i69.photobucket.com/albums/i80/swedenelson/1111-180-454325grHP.jpg

This buy is on the schedule.
We will keep the buy open until 2 or 3 weeks before the date on the schedule.
At that time we will close the buy and send out a PM with
a request for payment. We don’t require payment before then.

Prices will be as follows:
Single cavity mould $68.00 Ea.
Double cavity mould $72.00 Ea.
Three cavity mould $79.00 Ea.
Four cavity mould $85.00 Ea.
Five cavity mould $92.00 Ea.
RG2 cavity HP mould $96.00 Ea.
RG4 cavity HP mould $126.00 Ea.
Plus $10.00 Shipping/Handling.
Foreign orders are a additional $10.00 Shipping/Handling.
Prices are subject to change at any time.

You can mix number of cavities in an order to make 5.
We will offer plain base (PB) and gas check (GC) in the same blocks.

Use LEE Commercial 6-Cavity handles (not included).
Lyman, RCBS type top punch furnished with each mould
as well as a sample of Bull Plate sprue plate lube.
Moulds are machined from 2024 Aluminum
Used for high strength structural and aircraft applications.
Tensile strength range 30,000 to 63,000 psi
Sprue plate (blued), alignment pins, and hardware will be
carbon steel.

Hollow pointing one cavity and furnishing a double
ended pin would be $35.00 Extra.

We will accept Checks, Money Orders and Pay-Pal
Pay-Pal requires a 3% sir-charge.
Pay-Pal acount:
pbsco1@qwestoffice.net
Make checks and money orders out to:
NOE Bullet Moulds

Our mailing address is:
NOE Bullet Moulds
1645 W 150 N
Provo, Utah 84601
801 377-7289


Thank you for your interest in this buy.
Swede Nelson

[SwedeNelson]

List of orders
1. Mellonhead 4 cavity GC
2. Bearcove 3 cavity GC drill for probe
*3. linotype 4 cavity GC
4. Badbobgerman 4 cavity GC
5. Aaron 4 cavity PB
6 no34570 RG2 GC drill for probe
7 captain awesome RG2 GC
8 gvrj RG4 GC
9 citizenal 5 cavity GC drill for probe
10 Ziptar 4 cavity GC
11 jimgun RG4 cavity GC
12 Retro 4 cavity 2GC 2PB
13 hanleyfan RG4 GC
14 Idaho Sharpshooter RG4 GC
15 citizenal 5 cavity GC drill for probe
16 leftiye 1 cavity GC w/HP
17
18
19
20


(*) = Paid

Thanks
Swede Nelson

[no34570]

Would this go good in a Rossi 454 L/A,need a heavy boolit?
Anyone?

[no34570]

Sorry Al,meant to post this in the Group buy Discussion thread.(I have put it there now)
Delete if you want ;)

[no34570]

Ok,I'm in please Al.
I'll take a RG2 all GC and drill for probe please?
Thank you!

[coverbw]

rg2 mould 1 pb 1 gc

[SwedeNelson]

Updated list
Bump

Thanks for the orders
Swede Nelson

[happy7]

I'll take a 5 cavity gas check drill for probe

[SwedeNelson]

Updated list
Bump

Thanks
Swede Nelson

[bearcove]

Mine drilled for probe please.

[gvrj]

I'll take a RG4 cavity HP mould

[SwedeNelson]

Checked list
Bump

Swede Nelson

[bigboredad]

I'm in for a rg2 pb

[Ziptar]

I've been sitting the fence on this one for too long....

Put me down for a 4 cavity GC please.

[SwedeNelson]

Updated List

Bump

UPDATED SEE POST BELOW

Thanks
Swede Nelson

[jimgun]

I would like a 5 cavity, 2 plain base ( not the hollow point) and 3 gas check with 1 hp and double end pin. thanks jim

[SwedeNelson]

Update
Will try to keep all buys current on the schedule:
http://castboolits.gunloads.com/showthread.php?t=142415
If you have questions about our policy you can see it here:
http://castboolits.gunloads.com/showthread.php?t=156593

Bump

Swede Nelson

[Retro]

Hiya Swede

Thought my name was on the list for this one, obviously I went to bed with a good intention and forgot about it.

4 Cavity, 2 plain, 2 GC, please.

[SwedeNelson]

Updated list

Bump

Thanks for the order
Swede Nelson

[SwedeNelson]

Bump

Swede Nelson

[hanleyfan]

put me down for a RG4 mould with GC.

[Idaho Sharpshooter]

I am with the hanley fan.

Put me down for an RG4 mold with GC.

Rich

[bigboredad]

sorry I need to jump off this gb

[citizenal]

Hi,

I'll take a 5 cavity gas checked drilled for probe.

Thanks
Al

[AlabamaEd]

I would like an RG4 GC mold please.

Thanks,

[AlabamaEd]

Take me of this please, thanks

[SwedeNelson]

Done

Swede Nelson

[coverbw]

Will you please remove me from this this group buy.

Thank you.

[leftiye]

Ah wants one! Single cavity gchp.

[captain awesome]

ok, I will have an RG2 gas check

[gvrj]

Please change my order to a HP version. When are these scheduled?

Thanks
George

[no34570]

Bump ;)

[badbobgerman]

please drop me from this one thanks , cant wait any longer

[bearcove]

please drop me from this one thanks , cant wait any longer

Hey Bob, how long has it Been?

[badbobgerman]

Hey Bob, how long has it Been?
well

10-26-2011, 07:21 AM #1 bearcove
View Profile View Forum Posts Private Message Add as Contact Send Email
Boolit Master



--------------------------------------------------------------------------------

Join Date:Aug 2007
Location:Rio Rancho NM or Bearcove AK
Posts:1,833454 350gr small group buy here
We split the 452651 boolit clone to reduce the clutter that was piling up.

We need 5 to put this in Active Group Buy.

The drawing is in "452651 boolit clone 325gr" thread post #33. I will get a picture here when I figure out how.

So here is a list for 454350. Anyone not on the list that wants in let me know so we can get 5 to get it on the production schedule.

1. Mellonhead 4 cav
2. Bearcove 3 cav
3. linotype 4 cav
4. Badbobgerman 4 cav
5. Aaron 4cav pb

at least 1 year 2 months since i first started it and it seems it wont be made anytime soon , i dont see it on the schedule i would love this but a 2 year wait ? ...oh hell . keep me on i've waited this longsigh..

[SwedeNelson]

Checked list

Bump

Swede Nelson

[bearcove]

Hang in there Bob!

[SwedeNelson]

Checked list
Bump

Swede Nelson

[bearcove]

Bump!

[SwedeNelson]

Checked list

Bump

Swede Nelson

[happy7]

Please change my order to plain base. Thanks.

[happy7]

I'm going another direction on this so will have to drop out of this buy.

[TXSlade]

I asked in the discussion this question, but I gather no one reads it anymore. So I hope it's ok to ask here.

I've been told this boolit is for rifles at .460, but the 454651 appears to have the same diameter. I am confused, will the 454 350Gr work in a Freedom Arms 454 Casull?

[TXSlade]

BTW, my thoughts are if both of these will work in my Freedom Arms 454 then it would be a good idea to have both for variety and extra choices.

[jimgun]

hello, could you change my order, post 12, to a rg4 all gc with all pins. I am curious also about the above posts #43 and #44, because I am planning on using these in my casull also thanks jimgun

[SwedeNelson]

TXSlade

Its my understanding that both bullets are to by .454"
Both should work in the 45 Colt or 454

Updated thread
Bump

Swede Nelson

[CPL Lou]

I'd like an RG2 and a 2 cavity, Gas checked. [smilie=s:

THANKS !
CPL Lou

[TXSlade]

Thanks Swede,

I will take a RG2, GC. I'm assuming they coming with flat pins as well. If not I would like to order them.

[bbailey7821]

Will they fit in a FA cylinder?

[bbailey7821]

Sure looks like it.