uscra112
03-14-2007, 08:23 PM
Has any of the experienced members of this forum any information about the Bo Clerke High Wall that was made back in the 1970s?
A coupla years ago I came into possession of an unfinished receiver, said to have been from that project, but I am stumped as to exactly how the internal parts were laid out. The various holes don't correspond to the Winchester receiver at all.
Being a mechanism junkie, I just have to know! Every so often I set down in front of the confuser, light up my CAD, and try to work it out. I then quit a few hours later with a headache and no logical conclusions. Tonight was one of those nights. . . .
A coupla years ago I came into possession of an unfinished receiver, said to have been from that project, but I am stumped as to exactly how the internal parts were laid out. The various holes don't correspond to the Winchester receiver at all.
Being a mechanism junkie, I just have to know! Every so often I set down in front of the confuser, light up my CAD, and try to work it out. I then quit a few hours later with a headache and no logical conclusions. Tonight was one of those nights. . . .