NOE 453 200Gr. FN HP Brass

[SwedeNelson]

NOE 453 200Gr. FN HP Brass
THIS BUY IS CLOSED

http://i69.photobucket.com/albums/i80/swedenelson/1111-201-453200GrFNHP.jpg
http://i69.photobucket.com/albums/i80/swedenelson/1111-201-453230GrFN.jpg
http://i69.photobucket.com/albums/i80/swedenelson/453230GrHP002.jpg

This buy is on the Schedule, our schedule is a moving target and is out 10 to 12 months
If this is a problem, please dont order.

We try to update threads once a week, post what you want and we will try to keep
the list updated as we can.

We will keep the buy open until 2 or 3 weeks before the date on the schedule.
At that time we will close the buy and send out a PM with
a request for payment. We don’t require payment before then.

Prices will be as follows:
1 cavity Brass $90.00 Ea.
2 cavity Brass $94.00 Ea.
4 cavity Brass $111.00 Ea.
Hollow point one cavity and furnishing a double ended pin for
any of the above moulds would be $35.00 extra.

RG2 cavity HP brass mould $118.00 Ea.
RG4 cavity HP brass mould $152.00 Ea.
Comes with HP and FN pins.
Extra blank pin set for RG2 would be $4.00 and RG4 would be $8.00.

Plus $10.00 Shipping/Handling.
Foreign orders are a additional $10.00 Shipping/Handling.
Prices are subject to change at any time.

You can mix number of cavities in an order to make 15.
We will offer plain base only on this bullet.

Use LEE Commercial 6-Cavity handles (not included).
Lyman, RCBS type top punch furnished with each mould
as well as a sample of Bull Plate sprue plate lube.
Moulds are machined from C360 Free-Cutting Brass.
Sprue plate (blued), alignment pins, and hardware will be
carbon steel.

We will accept Checks, Money Orders and Pay-Pal
Pay-Pal requires a 3% sir-charge.
Pay-Pal acount:
pbsco1@qwestoffice.net
Make checks and money orders out to:
NOE Bullet Moulds

Our mailing address is:
NOE Bullet Moulds
1645 W 150 N
Provo, Utah 84601
801 377-7289




Thank you for your interest in this buy.
Swede Nelson

[SwedeNelson]

List of orders
*1 rvpilot76 RG4
*2 dogman RG4
*3 Ronbo256 RG2 drill for probe
*4 Dutch4122 RG4
*5 Dutch4122 4 cavity PB
6 MT Gianni RG2
*7 rintinglen RG2
8 harley45 RG2
*9 dominicfortune00 RG4
*10 x101airborne RG4
*11 MajorJim RG4
*12 Mike_60 RG4 drill for probe
13 blaser.306 4 cavity PB drill for probe
*14 AaronJ RG4
*15 Bodydoc447 RG2
16 2003viper RG4
*17 dagunnut RG4 drill for probe
*18 HighHook RG4
19 Idaho Sharpshooter RG4 drill for probe
*20 DDriller RG4
*21 CPL Lou RG4
*22 CPL Lou 4 cavity PB
*23 376Steyr RG4
24 MtnTeddyBear RG2
*25 GUINEAPIG WITH AK47 RG4 drill for probe
*26 bobo55 RG4 drill for probe
*27 357Voodo RG2
*28 Balduran RG4 w/blank pin set
*29 doctorggg RG2 w/blank pin set
*30 SP5315 RG2 w/blank pin set
31 MarcusT RG4
*32 Mallard57 RG4 w/blank pin set
*33 Shangrila RG4 w/blank pin set drill for probe
34 Island Trash RG4 drill for probe
*35 FLYCUTTER RG4 drill for probe
*36 Plinkster RG2 w/2 blank pin sets
*37 Nix RG4
*38 Sgt.Mike RG2
*39 GlocksareGood RG2
*40 Cooter65 RG4
*41 Indio RG4
42 358wcf RG2
*43 lup RG4 w/blank pin set
*44 lup RG4 w/blank pin set
*45 turmech RG2 drill for probe
*46 FThera RG4 drill for probe
*47 Beau Cassidy RG4
48
49
50
51
52
53
54

(*) = Paid



Thanks
Swede Nelson

[blaser.306]

I will take a rg4 drilled for probe as well, Thanks.

[Ronbo256]

I would like a RG2, thank you.

[Dutch4122]

I'm in for an RG4.

[AaronJ]

Sign me up for an RG4

[Bardo]

Swede I'm #2 on the list put me down for RG4 drill for probe.

Thanks, Bardo

[rvpilot76]

RG4 please.

Thanks Al,

Kevin

[Gunslinger1911]

Hi Swede,

RG 2 please

[SwedeNelson]

Updated list
Bump

Thanks
Swede Nelson

[Ronbo256]

Could I get mine drilled for a probe also, please. It seems naughty, but it may come in handy!

[SwedeNelson]

Updated list
Bump

Thanks for the orders
Swede Nelson

[Bodydoc447]

In for a RG2, please.

Doc

[2003viper]

i will take a RG4

[2003viper]

let me do a RG4
vernhinshaw@northstate.net

[SwedeNelson]

Checked list
Bump

Swede Nelson

[dagunnut]

I will take a rg4 drilled for probe, Thanks
robertzanoni at yahoo dot com

[SwedeNelson]

Updated List
Bump

Thanks
Swede Nelson

[SwedeNelson]

Checked list

Bump

Just so we have no misunderstandings this
buy is on the schedule for March 2013

Thanks
Swede Nelson

[HighHook]

Count me in on the RG4. Thanks

[SwedeNelson]

HighHook

Your on the list

Thanks
Swede Nelson

[Idaho Sharpshooter]

I was certain I was on the list for an RG-4, drilled for probe.

Put me on Swede.

Rich

[Bardo]

Please remove me from this buy.

Thanks, Bardo

[wrench]

One RG2 for me, please.

[SwedeNelson]

Doing a update
Will try to keep all buys current on the schedule:
http://castboolits.gunloads.com/showthread.php?t=142415
If you have questions about our policy you can see it here:
http://castboolits.gunloads.com/showthread.php?t=156593

Bump

Swede Nelson

[xacex]

Put me in the #20 spot for a RG4 with a probe hole Swede.
Lets get this group buy up to 30! I cant wait to compare this to my Mihec .45 acp H/P mold! This bags hole is big...
xacex

[Dutch4122]

Swede-

In addition to my existing order (#4 on the list) please put me down for a 4 cavity brass solid nose mold.

Thanks! :mrgreen:

[DDriller]

Put me in for a RG4. Thanks

[SwedeNelson]

Updated list

Bump

Thanks for the orders
Swede Nelson

[CPL Lou]

I'll take an RG 4 please.

[xacex]

I think this bullet needs a picture of the previous, lighter bullet so folks can get a perspective of the gaping hollow-point this bullet will have. The drawing of the design is great, but the visual of the actual bullet is spectacular. Maybe a note under the picture that this is a heavy version of the 186 grain bullet pictured in this thread ... http://castboolits.gunloads.com/showthread.php?t=135174 . I am lazy, and had to click on three links to get to the picture of this designs cousin.
xacex

[SwedeNelson]

xacex

Done
Updated

Swede Nelson

[376Steyr]

I'll take an RG4. Thanks!

[SwedeNelson]

Updated list

Bump

Thanks
Swede Nelson

[Mike_60]

Al,

Could you please change mine (#13) to an RG4 drilled for the temp probe.

Thanks,
Mike

[CPL Lou]

In addition to my existing order, please put me down for a 4 cavity brass solid nose mold please ? :holysheep

I must be addicted, or something like that ! :veryconfu [smilie=s:

Thanks,
CPL Lou

[dogman]

I'll take an RG 4 please.

[MtnTeddyBear]

I'd like to be put on the list for an RG 2 please.

Thanks,

Freddie

[GUINEAPIG WITH AK47]

I'm in! RG4 drilled for probe.

Makes crack look like sanka!

Kyle in Ft Myers

[bobo55]

I'm in for a RG 4, thanks

[Dutch4122]

Unless my count is off, that puts us at 31 molds ordered!

:guntootsmiley:

[357 Voodoo]

Dutch make that 32

Im in for an rg2

[wrench]

I'm sorry, but please take me out of this one. I was casting today with my only brass mold, and geez that thing is heavy!
I'm going to wait for something in aluminum.:oops:

[dogman]

Is this mold good for 1911's?

[xacex]

Is this mold good for 1911's?

It should work great in a 1911. This is what I am primarily purchasing this mold for myself.
xacex

[Balduran]

I am interested in this in an RG4 with a set of blank pins please.

[SwedeNelson]

Updated list

Bump

Thanks for the orders
Swede Nelson

[doctorggg]

Put me in for a RG4 with extra pins.
Thanks. Greg

[jethunter]

Stick me on the list for an RG4 drilled for probe,
thanks.

[doctorggg]

Please change my order to a RG2 with extra pins. My 5 shoulder operations do not like the weight of a 4 cavity brass mold. Thanks Greg

[SwedeNelson]

Updated list

Bump

Thanks for the order
Swede Nelson

[MarcusT]

Put me down for an rg4.

[Mallard57]

Hi I will take an RG-4.
Thanks,
Jeff

[shangrila]

Please sign me up for an RG4 drilled for probe. Thanks! unluckyone at mailcity dot com

[Island Trash]

I would like a RG4 and drilled for temp probe. Thanks.

[1911]

What does "drilled for probe" mean?

[jethunter]

"Drilled for probe" means the mould is manufactured with a hole drilled to accept an aftermarket BBQ temperature probe that NOE sells on their website. Drilling the hole is free of charge, i think. The probe allows you to monitor mould temperature and can take some of the guesswork out of casting.

[shangrila]

Please add additional set of blank pins to mine (RG4). Thanks.

[Mallard57]

Hi, please add a set of blank pins to my to my RG 4 order.
Thanks
Mallard57

[FLYCUTTER]

Swede, put me in for a RG4 with a drilled hole for the temperature probe. Thanks, Bob

[AlabamaEd]

I would like an RG4 mold please.

[Plinkster]

Put me down for an RG2 with 2 additional sets of pins please.

[Nix]

Please put me down for an RG4 with a set of round HP pins and a set of penta HP pins. greg at tacticaladvantage dot ca

[SwedeNelson]

Nix

We don't do pen-ta pins - sorry
Round HP and FN pins come with it.

Swede Nelson

[Plinkster]

So I noticed this GB has a few more folks signed up for it than some of the buys on the schedule, does that mean it will be put in front of those when the list is updated? No criticism of the system here just curious for budgeting purposes. NOE molds are top shelf and I'd wait a really long time for one I'm just a bit foggy on the system I suppose. And to Nix if you ordered an extra set of pins I'd bet you could grind em into the penta style if you like, I picked up some extras to try some other profiles myself.

[Gunslinger1911]

Swede, I'm gonna bail on this one - I just realized I'm in this one and the other 45-230HP.

Thanks

[AlabamaEd]

I'm going to back away from this, thanks.

[SwedeNelson]

Done

Swede Nelson

[dannybritton]

Hey Swede, put me down for an RG2 please.
Thanks!

[Mike_60]

This needed bumping

[doctorggg]

I'm #31 on the list. Please drop the extra pin set. I still want the mold. Thanks

[dannybritton]

Swede I found a 230 grain version of this mould, so I need to drop out of this GB.
Thank you sir!

[Nix]

Swede, I forgot to ask, can you also put me down for a set of hex pins in addition to the round pins, as well as handles? Thanks.

[SwedeNelson]

Nix

Sorry no hex pins or handles.

Swede Nelson

[sgt.mike]

[smilie=s:Swede,
would like to have 1 of the rg2 mold
Thank you.

[sgt.mike]

so i won't have to look for the thread btt

[TheCelt]

I'm #37 on the list, could you drill for temp probe please? Thanks.

[bobo55]

Swede, I'm #28 on the list. Can you drill for a temperture probe please? Thanks.

[xacex]

I am going to have to drop out of this one. #22 on the list. Thanks

[SwedeNelson]

Updated list

Bump

Thanks
Swede Nelson

[GlocksareGood]

These molds really are like crack. Put me down for a RG2 please.

[SwedeNelson]

Updated list

Bump

Thanks
Swede Nelson

[jethunter]

Please take me off this GB (#31 on the list). Sorry for the trouble.

[lup]

2 RG4 mould with extra blank pins for each please.

Rstaab (at) panix( dot) com


Sent from my iPad using Tapatalk HD

[Lefty SRH]

Four cavity solid please.

[358wcf]

Please include me for a brass 2 cavity rg2
thanks much, AL
Chuck 358wcf

[Indio]

I'd like to get in on this one

RG 4 ... Please

[Cooter65]

Please put me down for an RG4.

Thank you,

[SP5315]

Please put me down for one RG2 and a extra blank pin set.

[SwedeNelson]

Updated list
Bump

This is a last call
Will close this buy 1/6/2013
Start to get out a PM for payment over the weekend.

Thanks to all that have ordered
Swede Nelson

[turmech]

Please put me down for a RG2 and if possible drill for probe

[doctorggg]

payment sent by paypal. Left out email address. gggmmg at verizon dot net

mold info and CB handle was included.

[FThera]

Put me down for an RG4. Drill for probe

[turmech]

Sent MO in mail this morning.

[SwedeNelson]

A little slow closing this one.

THIS BUY IS CLOSED

Get your payment in, its in line for the mill -
Will run the 452 186Gr. FN HP along with it

Swede Nelson

[sgt.mike]

Funds /Payment sent (USPMO) on 17th Jan 2013.

[Plinkster]

PayPal sent yesterday, thanks Al looking forward to this one a lot. It ought to make for a great diet for my 1911.

[Plinkster]

Any word on this? Just anxious

[Tx308]

I know this is a long shot, but if anyone needs out of this buy that ordered an rg2 I would be more than happy to help and buy it off you.
Thanks

[Hard_Cast]

If there are any extras or additional molds, PM me and I will take off ur hands!!!

[sgt.mike]

Any word on this? Just anxious

Yeah plinkster I agree I can't wait either hehe really looking forward to getting the mold. Feels like christmas.

[Plinkster]

Sure does, I have my fingers crossed that I'll get it in time for a big shoot with some out of town friends at the end of the month.

[CPL Lou]

Mailed my check out on the 4th of February. :)

[Hard_Cast]

If there is a spare RG2 cavity HP mold at the end, keep me in mind! I like this style a little better than the MiHec GB going on currently...

[Plinkster]

For those that missed out on making the list and want one, keep an eye on this thread. When they ship the extras will be listed on NOE's website, you can't order them custom but you can pick from what's available. I've done this in the past with group buys from Mr. Nelson and you can get the mold a few days after the group does most times.

[SwedeNelson]

Have some information on this one here:
http://castboolits.gunloads.com/showthread.php?185404-Changes-at-NOE

Swede Nelson

[Plinkster]

Sorry to hear about your supplier bailing like that Al, that's no way to do business. I think you'll find few people in line for one of your molds that won't wait the couple extra weeks. I know I'll be happy to. Thanks for the update and I hope the growing pains aren't too tough on you.

[TheCelt]

Yea, +1 for what Plinkster said!!!

[sgt.mike]

Darn the luck,
Oh well 2 to 3 weeks + OK, Please just keep us posted Al as time allots.
I for one actually relieaze (as well as most whom ordered) that you will probably be more focused on the production versus posted on line here the status of the molds. I still look forward to receiving the molds.

No discontent from my end and do understand. No aploigies needed from NOE (AL) it is understandable, thanks for the update.

[MJohnston]

Hope there's extras. Would have liked to get in on this one for a rg2. Sounds like I will have to watch and hope.

[FLYCUTTER]

Swede ,are the brass molds getting cut or are they on the back burner? Just curious on delivery date.

[SwedeNelson]

FLYCUTTER

Yes - the material is in and it is being worked on now.
I have to work through the tooling and as soon as
I have a handle on that I will run them.

Cant say what date - but I'm working on it!

Swede Nelson

[CPL Lou]

Personally, I would rather wait a while longer and get a quality product.
Thank you for the update !

[Dutch4122]

Yes, thanks for the update. I'm sure that this design will be well worth the wait.:Fire:

[SwedeNelson]

Hope to have the brass blocks in about a week if things go right
It seem like every thing about this buy has been a problem

Still can't and won't tie it down to a date.

Doing everything in my power to get you your moulds
Swede Nelson

[FThera]

Thanks Swede

[timbuck]

Looking for an extra too.

[Dutch4122]

Thanks for the update. We know your doing all you can.

It will be worth the wait!

[Sig]

If you have a waiting list for extras, please put me on it. I would prefer a RG4 but would be perfectly happy with a RG2.
Thanks,
Sig

[Plinkster]

Any news Swede?

[Darkh2odiver]

Put me in for a two or four cavity FN, if there are any extras that is.

Thank you
Scott

[SP5315]

I'm really looking forward to this one. Any update on how it's coming along?

[FLYCUTTER]

If Swede cannot cut this in brass I would be happy with one cut in aluminum. How does everyone else feel ?

[TheCelt]

If Swede cannot cut this in brass I would be happy with one cut in aluminum. How does everyone else feel ?

I believe I'd prefer mine in Brass.

[SwedeNelson]

Its on the mill
Got everything in place to run with it.

Played with some scrap to get the feel of it and do some setup / test runs
Cuts like butter - knock on wood -
Our tool grinder does a fantastic job

Will keep you posted as I go, but looking good at this point.

Swede Nelson

[rvpilot76]

Outstanding Sir!

[Blammer]

Better make sure you're paid up or you get NOTHING!

[CPL Lou]

Thanks for the update ! [smilie=w:

[Dutch4122]

Better make sure you're paid up or you get NOTHING!


Good point and I certainly hope that there aren't any interlopers on the list that haven't paid yet that expect to get a mold. However, I'm not sure that the list on post #1 has been accurately updated. I'll use myself as an example.

I sent my payment for #4 and #5 in on January 23, 2013. My personal check has long since cleared the bank; but as of yet I don't have an * denoting payment received next to my orders. I just figured that Swede was busy producing molds and there was no need to bother him with updating the list til the end once the molds are produced.

Either way, I trust that he'll take care of business.

[SwedeNelson]

Updated list
Should be good now

Any questions or comments please post / PM me

Swede Nelson

[Darkh2odiver]

Fingers crossed for an extra. [smilie=s:

[SP5315]

I knew it couldn't be much longer on this one.

Swede, did you get my response to the PM?

[SwedeNelson]

Moulds are shipped
This is a good one to have behind us
Will list the extra moulds on the website ASAP

Thanks for the orders
Swede Nelson

[GUINEAPIG WITH AK47]

Out-Dang-Standing!!!

Pot warming now....

Kyle

[FThera]

WooHoo!

[CPL Lou]

Thanks Swede for taking the extra time with these molds to get them right. I prefer to wait a bit longer and receive a quality mold than to have it rushed and have to 'doctor' it to get it right.

CPL Lou [smilie=w:

[timbuck]

They are on there now, except one less RG4.

[bobo55]

Mine arrived today, putting her thru heat cycles now

[Dutch4122]

Got both of mine today and they look great! Thanks Swede, they were well worth the wait![smilie=w:

[doctorggg]

Mine arrived today as well. Great looking mold Al. Thank You.

[lup]

Got mine today. Post office drop kicked the box but the mould were good.

[shangrila]

Got mine today too, another beauty Al. Thanks for seeing this through and keeping us up to date.

[sgt.mike]

Received them today in excellant shape:bigsmyl2:
While I am not an expert nor did I sleep at a holiday inn last nite.
AL, these are a true work of art in my eyes, well worth the wait in my opinion, I only wish they had not been so trying on your end to produce. If I didn't have to work this weekend I start the break in of these, oh well just start next week / weekend
Now, I just need to pick out some more in 32, 9mm/38 and 45 cal

[FThera]

BEAUTIFUL just BEAUTIFUL Al! Thanks for the GREAT job.

[HighHook]

Got-it WOW! What a fine crafted chunk of precious metal craftsmanship. Thank you...

[SP5315]

Received mine today. I'm going to try her out this weekend. Beautiful looking mold. Thank you Al for making this one happen.

[Cooter65]

Got the mold yesterday, looks great. Al, thank you for a quality product.

[GUINEAPIG WITH AK47]

48 keepers outta the gate! Washed twice, heat cycled once and it was on! 750* melt, 2 HP (center), 2 solid pins in the ends. All four holes spit out .4525-.453 measured 90 degrees apart after 1 hr under the fan. Melt was 94-3-3.

Kyle

[GUINEAPIG WITH AK47]

NOW...to determine the correct OAL for my .45's (S/A XD service has the shortest chamber/throat). It'll be a few days, but will update. Anyone else loaded any yet? It's been almost 24 hrs!

Kyle

[timbuck]

Got mine from his online store yesterday.
BEAUTIFUL

[dagunnut]

Mine arrived yesterday its a work of art. Now for a few clear rain free days to get some cast with it.

Thanks
Mario
dagunnut

[Plinkster]

Got a batch cast but finding time to load these is proving the bear. Got a 1911 and a SAA clone that will take care of testing duties when I can get a few in some cases.

[Mike_60]

I'm out of town so my mold should be waiting for me at the PO, it would be really nice if someone would post a few pics....please....I'm begging here.

[Plinkster]

http://img.tapatalk.com/d/13/05/05/ume8y5es.jpgits just a quick phone pic but I believe everyone's heard the saying about beggars and choosers. Enjoy!

[Mike_60]

Those look really good.....thanks!

[GUINEAPIG WITH AK47]

1.153 passes plunk test in my 4" xD. Gonna try 5.2 Gr 231. Taper crimp to .4705.

[Balduran]

got mine today looks good despite the fact that customs opened the box and dumped everything back into the shipping box loose for the rest of the ride.

[GUINEAPIG WITH AK47]

OK, found that due to the ogive, I had to back out the crimping portion of the seat/crimp die and screw in the seating plug past the taper crimp line to keep the crimp edge from touching the bullet while seating. Turns out 1.18 passes plunk test on my shortest chamber (xD .45). This bullet casts about .008 shorter than devastator for reference. This bullet is also about .050 longer than lee 200 gr RNFP.

Kyle