Red River Rick
01-05-2012, 01:35 PM
KAL T&D "Steel" Cam Lever for Lyman 4 Cavity Moulds.
Tired of pounding your Lyman 4 Cavity sprue plate with a stick or mallet? You won’t be anymore with this new Sprue Cutter Plate and Steel Cam Lever.
This combination will greatly increase your bullet casting productivity with less hassle and trouble free operation.
This heavy duty replacement combo is similar to Lee’s original concept offered on their 6 cavity moulds. This new Sprue Plate & Cam Lever combo has been designed to offer sufficient “Cam Duration”, ensuring cleaner cuts with less physical force. The Cam/Mould block bearing surface is large enough to help reduce wear on the mould blocks as well.
All cam levers are laser cut from 5/16” steel plate and CNC machined to finished dimensions. Sprue Plates are laser cut from 3/16” steel plate and CNC machined as well. Blue /Black finish, comes with wooden handle & ferrule.
Simple to install, just swap the original sprue plate with the new one, using the factory original shoulder bolt (new spring washers included). It couldn’t be any easier.
Lifetime Guarantee against Breakage (Cam lever only).
If you break this lever, I’ll gladly send you a free re-placement.
I have a small limited number of these on hand. Send me a PM with yours want and I will send you payment information.
I am offering two styles, with and without the trough, prices are:
$34.00 each w/o trough
$36.00 each w/trough
Available with two sprue holes sizes, 0.125" - 0.130" (Small Hole)
and 0.150" - 0.156" (Large hole).
The small hole is for .40 cal and under, the larger hole is for .41 cal and larger.
State your needs, price is the same.
Shipping, cheapest method offered by Canada Post is Small Packet Surface:
Contact me for exact shipping costs to your address or other shipping options (insurance, tracking, etc.).
Rick Kalynuik
KAL Tool & Die
Tired of pounding your Lyman 4 Cavity sprue plate with a stick or mallet? You won’t be anymore with this new Sprue Cutter Plate and Steel Cam Lever.
This combination will greatly increase your bullet casting productivity with less hassle and trouble free operation.
This heavy duty replacement combo is similar to Lee’s original concept offered on their 6 cavity moulds. This new Sprue Plate & Cam Lever combo has been designed to offer sufficient “Cam Duration”, ensuring cleaner cuts with less physical force. The Cam/Mould block bearing surface is large enough to help reduce wear on the mould blocks as well.
All cam levers are laser cut from 5/16” steel plate and CNC machined to finished dimensions. Sprue Plates are laser cut from 3/16” steel plate and CNC machined as well. Blue /Black finish, comes with wooden handle & ferrule.
Simple to install, just swap the original sprue plate with the new one, using the factory original shoulder bolt (new spring washers included). It couldn’t be any easier.
Lifetime Guarantee against Breakage (Cam lever only).
If you break this lever, I’ll gladly send you a free re-placement.
I have a small limited number of these on hand. Send me a PM with yours want and I will send you payment information.
I am offering two styles, with and without the trough, prices are:
$34.00 each w/o trough
$36.00 each w/trough
Available with two sprue holes sizes, 0.125" - 0.130" (Small Hole)
and 0.150" - 0.156" (Large hole).
The small hole is for .40 cal and under, the larger hole is for .41 cal and larger.
State your needs, price is the same.
Shipping, cheapest method offered by Canada Post is Small Packet Surface:
Contact me for exact shipping costs to your address or other shipping options (insurance, tracking, etc.).
Rick Kalynuik
KAL Tool & Die