PDA

View Full Version : mold


wgr
12-21-2011, 11:50 PM
were do you guys get your molds for the sharp rifle?
powderburnerr
12-22-2011, 12:11 AM
from red river rick
Don McDowell
12-22-2011, 12:30 AM
I have moulds from Lyman, RCBS, SAECO, BACO, Brooks and Old West.
Bad Ass Wallace
12-22-2011, 06:19 AM
After casting the chamber and throat, Paul Jones has made all my Sharps moulds.

The 372gn Creedmoor for my 38/55 x 1:12" twist target rifle is truely a work of art!8-)
montana_charlie
12-22-2011, 02:09 PM
were do you guys get your molds for the sharp rifle?
Describe your Sharps rifle ...
CM
wgr
12-22-2011, 04:44 PM
Describe your Sharps rifle ...
CM

it is a c-sharp 45-70 30in. barrel 1-18 twist
Don McDowell
12-22-2011, 04:53 PM
Saeco 645 works real well in those badger barrels.
montana_charlie
12-22-2011, 07:55 PM
it is a c-sharp 45-70 30in. barrel 1-18 twist
Okay. I just wondered if you might have a percussion Sharps ... and needed a 'special' kind of mould.
CM
MT Chambers
12-22-2011, 10:35 PM
The Lyman 335 gr, spitzer is a nice mold, shoots good and is affordable.
wgr
12-29-2011, 11:45 PM
thinks guy for the help bill