NOE 286407 150Gr. FN (7mm Louverin)

[SwedeNelson]

NOE 286407 150Gr. FN (7mm Louverin)
Here is the link to the discussion thread:
http://castboolits.gunloads.com/showthread.php?t=111851

http://i69.photobucket.com/albums/i80/swedenelson/1111-154286407150GrFN.jpg
We will offer this bullet with .286” or .288” diameter.
One diameter per block.

This buy is on the schedule.
We will keep the buy open until 2 or 3 weeks before the date on the schedule.
At that time we will close the buy and send out a PM with
a request for payment. We don’t require payment before then.

Prices will be as follows:
Single cavity mould $68.00 Ea.
Double cavity mould $72.00 Ea.
Three cavity mould $79.00 Ea.
Four cavity mould $85.00 Ea.
Five cavity mould $92.00 Ea.
Plus $10.00 Shipping/Handling.
Foreign orders are a additional $10.00 Shipping/Handling.
Prices are subject to change at any time.

You can mix number of cavities in an order to make 15.
We will offer gas check or plain base on this bullet.

Use LEE Commercial 6-Cavity handles (not included).
Lyman, RCBS type top punch furnished with each mould
as well as a sample of Bull Plate sprue plate lube.
Moulds are machined from 2024 Aluminum
Used for high strength structural and aircraft applications.
Tensile strength range 30,000 to 63,000 psi
Sprue plate (blued), alignment pins, and hardware will be
carbon steel.

Hollow pointing one cavity and furnishing a double
ended pin would be $35.00 Extra.

We will accept Checks, Money Orders and Pay-Pal
Pay-Pal requires a 3% sir-charge.
Pay-Pal account:
pbsco1@qwestoffice.net
Make checks and money orders out to:
NOE Bullet Moulds

Our mailing address is:
NOE Bullet Moulds
1645 W 150 N
Provo, Utah 84601
801 377-7289


Thank you for your interest in this buy.
Swede Nelson

[SwedeNelson]

List of orders
1 Nrut 3 cavity GC .288
2 6.5 mike 2 cavity GC .286
3 verney 4 cavity GC .288
4 dromia 4 cavity GC .286 drill for probe
5 dromia 4 cavity GC .288 drill for probe
6 blaser.306 5 cavity GC .286 drill for probe
7 Piedmont 4 cavity GC w/HP .288
8 TreeKiller 4 cavity GC .288
9 Cbenc1 4 cavity GC .288
10 Andy P 4 cavity 2GC 2PB .288
11 L Ross 2 cavity GC .288
12 Ed in North Texas 2 cavity GC .288
13 koehn,jim 4 cavity GC .288
14 kbstenberg 3 cavity GC .286
15 Dutch4122 5 cavity GC .288
16 MUSTANG 4 cavity GC w/HP .288
17 Buckshot 2 cavity GC .288
18 Lefty SRH 2 cavity GC .288
19 725 2 cavity GC .288
20 Jim Flinchbaugh 2 cavity GC .288
21 Del-Ray 3 cavity GC .288
22 15bobcat 2 cavity 1GC 1PB .288 drill for probe
23 Janoosh 2 cavity PB .286
24 Janoosh 2 cavity PB .288
25 Prodigal Son 2 cavity GC .286
26
27
28
29
30




Thanks
Swede Nelson

[Nrut]

Hello Swede,
I will take a 3 cav. / gc. / .288" mold..
Thanks!

[6.5 mike]

I'm in for a 2 cav, g/c, 0.286:Fire:

[Duett]

I will take a double cavity / plain base / 0.286 mould!

Thank You!

[verney]

I will probably change my mind about the mould configuration before this goes to production but put me to the list as 4-cavity, gc, .286

[dromia]

1 x 4 cav GC .286 drill for probe
1 x 4 cav GC .288 drill for probe

[725]

I'll take a 2 cavity, gas check, .288.

[blaser.306]

5 cavity gas check .286 and drill for probe please !

[Dutch4122]

Deleted

[kbstenberg]

I have a question please.
I did some crude measurement off of the picture in the first post. What is the measurement of the first band that is full diameter to the base? My crude measuring gets about .450.
Kevin

[Piedmont]

I'd like a 4 cavity .288" GC with one cavity drilled for a HP.

[SwedeNelson]

Updated list
Bump

kbstenberg
Measurement from top of band to base
of bullet is .419" with out a check.

Swede Nelson

[Cbenc1]

I would like a 4 cavity gas check, .288 dia.


Thanks

[TreeKiller]

I would like a 4 cavity gas check, .288 dia.
Dan

[verney]

What was I thinking, please correct my order to a .288

[SwedeNelson]

Updated list
Bump
You can check the scheduale here:
http://castboolits.gunloads.com/showthread.php?t=130122

Swede Nelson

[SwedeNelson]

Updated list
Bump

Swede Nelson

[725]

725 -- can't wait for it

[SwedeNelson]

Updated list
Bump

Thanks for the orders
Swede Nelson

[Ed in North Texas]

Put me in for a 2 cavity .288 GC please. Thanks, and a bump

Ed

[Duett]

I would like to update my order (#3) as follows: one four cavity mould with 2PB and 2GC. Thank You!

[SwedeNelson]

Updated list
Bump

Thanks
Swede Nelson

[SwedeNelson]

Checked list
Bump

Swede Nelson

[koehn,jim]

I would like to order a 4 cavity with gas checks and at .288 . Thanks very much.

[SwedeNelson]

Updated list

Bump

Just so we have no misunderstandings this
buy is on the schedule for January 2013

Thanks
Swede Nelson

[kbstenberg]

You can put me down for a 3 cavity, GC, in .286
Kevin

[SwedeNelson]

Doing a update
Will try to keep all buys current on the schedule:
http://castboolits.gunloads.com/showthread.php?t=142415
If you have questions about our policy you can see it here:
http://castboolits.gunloads.com/showthread.php?t=156593

Bump

Swede Nelson

[Dutch4122]

Looks like I'll need to get back in on this Group Buy as I now have a Ruger M77 MkII that this design should fit.

Please put me back on the list for a 5 cavity mold, gas checked, .288" diameter.

Thanks!:Fire:

[SwedeNelson]

Dutch4122

Done
Thanks for the order
Starting to look at every order as a blessing.

Swede Nelson

[SwedeNelson]

Updated list

Bump

Thanks
Swede Nelson

[MUSTANG]

Please add me to the Order for:

.288 dia; GC 4 cavity drilled for HP, let me know when I need to send money.

Thanks.

[Duett]

To get this group buy some more moulds ordered, please update my order (#3) as follows:

- 1 x .286 four cavity plainbase
- 1 x .286 four cavity GC
- 1 x .288 four cavity plainbase
- 1 x .288 four cavity GC

I really like the 7x57(R) ! :)

Duett

[SwedeNelson]

Checked list

Bump

Swede Nelson

[Lefty SRH]

Put me down for a .288, 4C, GC

BUMP

[SwedeNelson]

Update list

Bump

Thanks
Swede Nelson

[Jim Flinchbaugh]

I'm in for a 2 cavity w/GC @.288"

[725]

OK, put me back on the list. I would like a 2 cavity .288 gas check. Actually, the fatter the better. My 1895 has a very large bore.

[725]

Just another question: How many are signed up for this one and when will it go out? Best guess appreciated.

[SwedeNelson]

Updated list

Bump

725

Check post #1
24 on the list
As to a date all I can say is it is moving up

Thanks
Swede Nelson

[Duett]

Please remove me from this group buy (orders 3,4,5 and 6), thanks!

[Andy_P]

Please remove me from this group buy (orders 3,4,5 and 6), thanks!

Given the The ridiculously slow pace of these Group Buys, I can't blame you. I'll leave my name there, but if in 18 months it comes time to pay, I might have moved on to something else.

[15bobcat]

Hi Swede:

Please add me to the list for a 2 CAV 1GC 1PB .288 drill for probe. Funds sent to you via Pay-Pal today.

Thanks, Harold

[725]

in re above from 15bobcat, are you asking for payment for this one. Did I miss something? Please advise. Really want this one as soon as it's available.

[Lefty SRH]

Where is this mold on the mill schedule?

[Lefty SRH]

TTT to keep the interest fresh.

[725]

Man - you're killin' me. I saw a fresh entry on this thread and thought "oh boy. movement on this one!" Oh well. Am eager for this one to come about, too.

[Jim Flinchbaugh]

Man - you're killin' me. I saw a fresh entry on this thread and thought "oh boy. movement on this one!" Oh well. Am eager for this one to come about, too.

yeah, I'd like to see this one too, but I honestly hope for a small delay, as I dont have this one paid for yet, and I really cant afford to make payment next month.
Feb is always my worst month of the year and this one was listed as being ready to go in Jan

[Nrut]

Jim,
Hope I am wrong but if Al is doing two group buys per month then we won't see this buy made until Oct.

Go to the bottom of the page in the link below and check on "15 or more orders"

http://noebulletmolds.com/orders/catalog/schedule.php

[Del-Ray]

Well heck.

Slap me up there for a three cavity, gas check, .288" please.

[Jim Flinchbaugh]

Jim,
Hope I am wrong but if Al is doing two group buys per month then we won't see this buy made until Oct.

Go to the bottom of the page in the link below and check on "15 or more orders"

http://noebulletmolds.com/orders/catalog/schedule.php
yeah, its turning into a pretty long wait for a mold that cost half as much as the rifle I need it for[smilie=1:

[oscarflytyer]

WOW! IF this ever happens, pls update. I might opt in if it really happens. I have a VZ24 "JC Light" rifle on the way, and slugs at .287. Prob need something like this.

[Lefty SRH]

Trying to keep the interest, TTT

[MUSTANG]

yeah, its turning into a pretty long wait for a mold that cost half as much as the rifle I need it for[smilie=1:


Well I'm embarrassed Jim, I gave $72.00 in 1982 for the Rifle I am buying this mold for, so I am paying more for the mold than the rifle. I've only shot 20 rounds total out of this rifle, got 20 rounds of surplus 7 x 57 with the rifle when I bought it back then. Once we get the mold I guess I'll have to shoot it again, I laid in about 200 rounds of boxer brass for it back in the late 1990's when midway had some they put on sale.

Mustang.

[SwedeNelson]

Updated list
The schedule is moving - just not as fast as you or I would like!
Will be very happy when this is all over - never again
Bump

Swede Nelson

[Jim Flinchbaugh]

thanks for the effort Swede, I know its tough.

[Lefty SRH]

Updated list
The schedule is moving - just not as fast as you or I would like!
Will be very happy when this is all over - never again
Bump

Swede Nelson

What do you mean "never again"?

[Lefty SRH]

Does this boolit design work well in both Mil-Surp chambers and shorter throat commercial like Ruger chambers?

[Nrut]

Not all Ruger throat lengths are created equal..

Can't touch the lands and have 175gr. Hornady stay in the case in a Ruger #1 that I have..

[Lefty SRH]

Not all Ruger throat lengths are created equal..

Can't touch the lands and have 175gr. Hornady stay in the case in a Ruger #1 that I have..

Wow, that doesn't sound right. The throat in my Ruger No.1 is about .300" long.

[Nrut]

That's why I said, Ruger throats are not all created equal..
Depends on what time frame they were made in??

[Janoosh]

Please add me to the list. I want a two cavity PB .286. And a two cavity PB 288. Janoosh 3 5 7 *a*t* gee* male (dot) com. Thanks

[Lefty SRH]

Don't want to lose track of this one.

[Prodigal Son]

Swede can I still get in on this one? If so, I would like a 2 cav. g/c, .286 thanks Prodigal Son. Been out of the country for last year, looks like I am back for a bit.

[SwedeNelson]

Checked list
Bump

Swede Nelson

[hc18flyer]

Swede, Is this still open? I would be interested in a two cavity, .286, gas check mold. tom@bluebirdnurserydotcom
Thanks, Tom

[TCTex]

Please put me down for a 4 cal-all GC'ed.

Duane