NOE 338320 201Gr. FN

[SwedeNelson]

NOE 338320 201Gr. FN
Here is the link to the discussion thread:
http://castboolits.gunloads.com/showthread.php?t=110658

http://i69.photobucket.com/albums/i80/swedenelson/1111-151338320201GrFN.jpg

This buy is on the schedule.
We will keep the buy open until 2 or 3 weeks before the date on the schedule.
At that time we will close the buy and send out a PM with
a request for payment. We don’t require payment before then.

Prices will be as follows:
Single cavity mould $68.00 Ea.
Double cavity mould $72.00 Ea.
Three cavity mould $79.00 Ea.
Four cavity mould $85.00 Ea.
Five cavity mould $92.00 Ea.
Plus $10.00 Shipping/Handling.
Foreign orders are a additional $10.00 Shipping/Handling.
Prices are subject to change at any time.

You can mix number of cavities in an order to make 15.
We will offer gas check or plain base on this bullet.

Use LEE Commercial 6-Cavity handles (not included).
Lyman, RCBS type top punch furnished with each mould
as well as a sample of Bull Plate sprue plate lube.
Moulds are machined from 2024 Aluminum
Used for high strength structural and aircraft applications.
Tensile strength range 30,000 to 63,000 psi
Sprue plate (blued), alignment pins, and hardware will be
carbon steel.

Hollow pointing one cavity and furnishing a double
ended pin would be $35.00 Extra.

We will accept Checks, Money Orders and Pay-Pal
Pay-Pal requires a 3% sir-charge.
Pay-Pal account:
pbsco1@qwestoffice.net
Make checks and money orders out to:
NOE Bullet Moulds

Our mailing address is:
NOE Bullet Moulds
1645 W 150 N
Provo, Utah 84601
801 377-7289


Thank you for your interest in this buy.
Swede Nelson

[SwedeNelson]

List of orders
1 376Steyr 3 cavity GC
*2 ohiochuck 5 cavity GC w/HP
3 sharpshooter3040 5 cavity GC
4 sharpshooter3040 5 cavity GC
5 sharpshooter3040 2 cavity GC w/HP
6 LEADHOPPER 4 cavity GC
7 hithard 3 cavity GC
8 Mibo 3 cavity GC
9 8mm 3 cavity GC
10 dromia 4 cavity GC drill for probe
11 x101airborne 5 cavity GC w/HP drill for probe
12 mtnman31 2 cavity GC
13 FLYCUTTER 5 cavity GC w/HP drill for probe
14 Slow Elk 45/70 3 cavity GC w/HP
15 chrisw 2 cavity GC w/HP drill for probe
17 woodtroll 2 cavity GC drill for probe
18 TCTex 4 cavity GC
19
20
21

(*) = Paid

Thanks
Swede Nelson

[376Steyr]

I'll take a 3 cavity. Thanks!

[ohiochuck]

I will take a 3 cavity GC.
Thanks!
Jim

[sharpshooter3040]

put me in for 2, 5 cavity gas check, and one 2 cavity hollowpoint. Three moulds total


Thanks for running this buy


Doug

[LEADHOPPER]

I'll take a 4 cavity GC.
Thanks
LH

[hithard]

3 cavity with GC,

Thank you

[Mibo]

Please put me.down for a 3 cavity all GC
thanks
Mike

[8mm]

In for a 3 cavity GC

Thank you

[dromia]

1 x 4 cav GC drill for probe. :D

[sharpshooter3040]

bump up

[SwedeNelson]

Updated list
Bump
You can check the scheduale here:
http://castboolits.gunloads.com/showthread.php?t=130122

Swede Nelson

[sharpshooter3040]

bump to front

[x101airborne]

Well, since this is so far out.... Im in. I dont even own a 338, but would love a 338 federal. 5 cavity with the last hollow pointed. Drill for probe. Thanks.

[ohiochuck]

Please change my order from 3 cavity to 5 cavity GC, please.
Thanks!
Jim

[SwedeNelson]

Checked list
Bump

Thanks for the orders
Swede Nelson

[winelover]

Updated list
Bump
You can check the scheduale here:
http://castboolits.gunloads.com/showthread.php?t=130122

Swede Nelson

Link to schedule isn't working!

Winelover

[x101airborne]

Now you know it is bad when you dont own a rifle in that caliber, but you get so excited to see the group buy that you dont even realize you already signed up for the buy! I am gonna start the first CastBoolits therapy group. I'll start.


Hi. My name is Trey and I have a casting addiction.

[SwedeNelson]

Checked list
Bump

Swede Nelson

[SwedeNelson]

Checked list
Bump

Swede Nelson

[SwedeNelson]

Checked list

Bump

Just so we have no misunderstandings this
buy is on the schedule for December 2012

Thanks
Swede Nelson

[sharpshooter3040]

bump for interest

[SwedeNelson]

Update
Will try to keep all buys current on the schedule:
http://castboolits.gunloads.com/showthread.php?t=142415
If you have questions about our policy you can see it here:
http://castboolits.gunloads.com/showthread.php?t=156593

Bump

Swede Nelson

[SwedeNelson]

Updated list

Bump

Thanks
Swede Nelson

[SwedeNelson]

Bump

Swede Nelson

[FLYCUTTER]

Put me down for a 5 cavity GC, drilled for probe, and hp on one cavity. Thanks Swede !!

[mtnman31]

Sign me up for a 2 cavity, gas check.

[Mr Peabody]

Put me down for a two cavity GC

[SwedeNelson]

Updated List

Bump

Thanks for the orders
Swede Nelson

[FLYCUTTER]

Swede, you missed me I'm post #26
Thanks, Bob

[SwedeNelson]

FLYCUTTER

Sorry about that good friend
Done

Swede Nelson

[ohiochuck]

Please update my order by adding an HP of one cavity

ohiochuck 5 cavity GC with one HP
My money order is on the way to you!

Thanks!
Jim

[chrisw]

looks great and I'm going to want 1, not sure quite yet exact config

the $35 HP charge per cavity? So, a 2 cavity both HP= 72 +(2×35)=142? And 4 cavity 4x 35?

thank you!

[SwedeNelson]

Bump

Swede Nelson

[Slow Elk 45/70]

:groner:Hullo Swede...Please add me to this buy if not to late...1ea-3 cav GC W/1 HP & pins

[Shakey Jakey]

Ill take a 3 cavity GC. Thanks

[chrisw]

hi! Can I get on the list for a 2 cavity, gas checked, 1 HP, drilled for probe?

thanks!

[Aaron]

Please add me for five avitygas check.

Thanks

Aaron

[ohiochuck]

Swede,
My Winchester 1886 in .33 Winchester is getting hungry for these silver boooolits.
Jim

[SwedeNelson]

Updated list

Bump

Thanks
Swede Nelson

[Mr Peabody]

Al; I would like out of this one. I want to get the 358009 worse.

[ohiochuck]

HI SwedeNelson!
Can you advise when this mold will be made? I notice I am the only one paid at this time. My Winchester 1886 .33 Winchester is hungry.
Thanks!
Jim

[chrisw]

HI SwedeNelson!
Can you advise when this mold will be made? I notice I am the only one paid at this time. My Winchester 1886 .33 Winchester is hungry.
Thanks!
Jim

this buy isn't "dead last" but its real real close!

17 unscheduled buys ahead of it (out of the 18 others), And schedule is currently out to May @2 a month... Based upon Data I make a guess for December 2035 [smilie=b:

that said, NOE is changing things around pretty seriously, so *maybe* they will get caught up enough to change their way for scheduling for these old (this is currently one of the older ones isn't it?) molds. I understand the reasoning but I feel real sorry for the guys who signed up in the discussion thread... It would be nice if they had some sort of function that balanced age with numbers for "unpopular" calibers like this IMHO.

edit- new molds shouldn't bump this one. Especially since new GB are on hold!

[Shakey Jakey]

Al, Please take me off this one. Thanks

[SwedeNelson]

Updated list
Bump

ohiochuck, others

We are starting to make headway on our backlog.
I would very much like to have it in order by next spring or early summer.
That would be having everything current and taking on new group buys.

2035 .................................................. ........LOL :-D







Swede Nelson

[Woodtroll]

If this buy ever comes up, I would like to have a 2-cavity GC, drilled for probe.

Thank you,
Regan

[SwedeNelson]

Updated List

Bump

Swede Nelson

[TCTex]

I would like to be put down for a 4 cav-all GC’ed.

[SwedeNelson]

Updated list
Bump

Swede Nelson

[wool1]

I'm in.....4 cavity GC with a HP cavity

wwoolson68 (at) gmail (dot) com