Bullet Lube

[686]

Does Any One Make There Own Hard Bullet Lube.? What Is Your Mixture. I Know I Will Need A Heater On My Star Sizer. What Type Of Mold Do You Use ? Thanks

[cbrick]

Curios why you want a hard lube??

As for a lube mould, I made mine. It's a 2x6 split up the middle with a piece of flat rubber in the middle. The tubes are 1" ID from a local metal supply company. I use a 1" wood dowel to slide the lube sticks out (helps to hold it under cold water, this shrinks the lube stick).

http://www.lasc.us/DSCN1676-5.jpg

Rick

[686]

I Like The Hard Lube Because Is Stays On The Bullets Cleaner. Here In Florida. I Hace Not Had Any Problum With Leading. Have Been Using Magma Lube. 1 In. Was Thinking Of Getting Some Of There 2x6 Sticks Melt And Make 1 In Sticks. I Am Also Trying Some Ruster Zamb. Lube. I Fave 2 Star Sizers. Thanks.

[44woody]

686 I don't make but I have been getting this hard lube from a local man if you want some pm me it cost $14 per pound where abouts are you in Florida :castmine: 44Woody