zinc WW

[GP100man]

smelted 2 buckets today & found 3 WW that didnt melt ZINC
when thesmoke lessens & the last ones are melting i could hear something
bigger than a clip hit the spoon, yep 1.5oz ZINC WW all three
of um.!!
so remember fellers keep the smelter heat moderate & be careful!!!!
GP

:castmine:

[dmftoy1]

I did my first smelting ever yesterday and I found about 6-7 over a whole 5 gallon bucket of wheel weights. I had all the clips skimmed off and I kept pushing it under the surface figuring it would melt and it just sat there looking as good as new. I looked over the weights that didn't melt and there didn't appear to be any markings on them to indicate that they were zinc. (FWIW)

[sundog]

http://home.valornet.com/corkyconnell/photos/nogo_wws.jpg

[imashooter2]

The ones I've found weren't marked either:

http://mywebpages.comcast.net/imashooter2/pictures/zinc-ww.jpg

[WHITETAIL]

GP100man, Yes I have found a few too. They seem to rivit them on to the clip.

[NVcurmudgeon]

All the riveted clip weights I have seen so far are magnetic, but there's a lot of variation out there. Weight manufacturers seem to be unaware of us and the feds hate us so keep the smelting temp down to 600-650!