Cast loads using 2400 in the 500 S&W

[WCF3030]

I have an H&R in 500 S&W and I'm looking for loads using cast 400-500gr using 2400.
I'm open to other powders but would like to use 2400.

The goal is for that weight bullet to do around 1300fps from the rifle.

Thanks

[snuffy]

http://www.handloads.com/loaddata/default.asp?Caliber=500%20SqqqW%20Magnum&Weight=All&type=Handgun&Order=Powder&Source=

I've used some of these loads from the handloads .com site. I see nothing there for using 2400 in ANY 500 S&W loads.

I found two loads in the Hornady 8th edition for 300 FTX and 350 HP using 2400 powder. 350 HP, 30.6 to 38.2.

[WCF3030]

http://www.handloads.com/loaddata/default.asp?Caliber=500%20SqqqW%20Magnum&Weight=All&type=Handgun&Order=Powder&Source=

I've used some of these loads from the handloads .com site. I see nothing there for using 2400 in ANY 500 S&W loads.

I found two loads in the Hornady 8th edition for 300 FTX and 350 HP using 2400 powder. 350 HP, 30.6 to 38.2.

Thanks for the reply.
I had checked Handloads site and a few other places but no luck yet.
There are loads list for the 500 Lin with 2400, but none yet for the 500 S&W.