Rerun of NOE 315 115Gr. SWC

[NoZombies]

Update 5/4/13: This buy will officially close 5/10/13 which will roughly co-incide with the molds being run. All orders must be placed by midnight EST 5/10/13 in order to be included in this buy!



As discussed in This thread (http://castboolits.gunloads.com/showthread.php?p=1360730#post1360730) It seems that perhaps it would be a good idea to start a new thread requesting a Re-run of this bullet:

http://i69.photobucket.com/albums/i80/swedenelson/1111-097-315115GrSWC.jpg

Original thread for this bullet is found here (http://castboolits.gunloads.com/showthread.php?t=96126)

Pricing info:

prices will be as follows:
Single cavity mould $68.00 Ea.
Double cavity mould $72.00 Ea.
Three cavity mould $79.00 Ea.
Four cavity mould $85.00 Ea.
Five cavity mould $92.00 Ea.

RG2 Hollow point mould $96.00 Ea.
Includes HP and FN pins
RG4 Hollow point mould 126.00 Ea.
Includes HP and FN pins
Plus $10.00 per order (up to 3 moulds) Shipping/Handling.
Prices are subject to change at any time.

You can mix number of cavities in an order.
We will offer gas check or plain base on this bullet.

Use LEE Commercial 6-Cavity handles (not included).
Lyman, RCBS type top punch furnished with each mould
as well as a sample of Bull Plate sprue plate lube.
Moulds are machined from 2024 Aluminum
Used for high strength structural and aircraft applications.
Tensile strength range 30,000 to 63,000 psi
Sprue plate (blued), alignment pins, and hardware will be
carbon steel.

Hollow pointing one cavity and furnishing a double
ended pin would be $35.00 Extra.

We will accept Checks, Money Orders and Pay-Pal
Pay-Pal requires a 3% sir-charge.

Our mailing address is:
Night Owl Enterprises
1645 W 150 N
Provo, Utah 84601
801 377-7289

Interest list:

1. NoZombies........ RG4 PB
2. GunDownUnder...4 Cavity PB (shipping to AUS)
3. Castblast...........5 Cavity GC drilled for probe
4. Nueces..............5 Cavity PB
5. Nueces..............RG2 GC
6. Landric.............3 Cavity PB
7. Landric.............3 Cavity PB
8. Rusty W.......... 3 Cavity, 2PB 1GC
9. RedneckDan....RG4 2GC 2PB
10. Contender1.....3 Cavity PB +1HP
11. ddixie884........5 Cavity PB
12. monadnock#5..4 Cavity GC
13. shootingbuff.....RG4 2GC 2PB
14. Buffalo Hunter...5 cavity PB
15. Daschnoz.........RG2 GC
16. OuchHot!.........4 Cavity PB
17. starreloader......5 Cavity PB
18. starreloader......5 Cavity PB
19. JBaisch............4 Cavity GC
20. R Flux.............4 Cavity PB
21. Norseman .......5 Cavity PB (shipping to Norway)
22. MTtimberline....5 Cavity PB
23. Fishman .........5 Cavity 3PB 2GC
24. frankenfab........4 Cavity GC Drill for Probe
25. frankenfab........4 Cavity PB Grill for Probe
26. gundownunder. 4 Cavity PB
27. jaydub in wi......4 Cavity PB
28. Bodydoc447.......RG2 PB
29. Sgt. Mike...........RG2 PB
30. Slug .................5 Cavity PB
31. fluxion ..............5 Cavity PB
32. LDMCROOK .......5 Cavity PB
33. jj850 ................5 Cavity PB
34. Deadwood Dan ..RG4 2GC 2PB
35. Crash87 ...........4 Cavity PB
36. 101VooDoo ......4 Cavity 3PB 1GC Drill for Probe
37. NoZombies .......5 Cavity PB
38. Dschuttig ..........RG4 PB
39. Visible Miss ......4 Cavity PB
40. jrayborn ...........5 Cavity PB
41. mustanggt .......4 Cavity PB

[gundownunder]

I'd be in for a 4 cavity PB, in either brass or aluminium.

[castblast]

I'm in for a 5 cav gc drilled for temp probe.

[Nueces]

I'd go for a 5-cavity plain base and an RG2 gas checked.

Mark

[NoZombies]

-------------

[NoZombies]

-----------

[NoZombies]

Updated first post

[happy7]

Put me down for a 5C PB

[Landric]

OK, I'm in this time around for a 5 Cavity 5PB. Thanks!

[Rusty W]

I'm in for a 3 cavity if I can get a GC snuggled in between 2 PB.
Thanks,
Rusty

[NoZombies]

Rusty, I don't think it will be between the other cavities, but we can get you a mold with 2 PB an one GC for sure.

[redneckdan]

in for an RG 4 2 GC 2 Plain

[Rusty W]

I'm still in for a 3 cavity, 2PB, 1GC. I was just wanting to test an idea I got from using the RG4 313640.

[NoZombies]

I'm still in for a 3 cavity, 2PB, 1GC. I was just wanting to test an idea I got from using the RG4 313640.

When it comes time for the run, I'll ask him if it's possible, for now, you're on the list for a 2PB 1 GC

[Dutch4122]

Ok, can't pass this one up a second time. Put me down for a 5 cavity, all plain based.

Thanks!:Fire:

[gundownunder]

Hey NoZombies
looks like 5 cavity is the preferred option, if my 4 cavity turns out to be an oddball I'm happy to upgrade to a 5 to keep things simple ;)

I assume you will let us know when to start sending in the cheques, and I will also need to know how much extra to include for shipping to Australia.

[NoZombies]

Hey NoZombies
looks like 5 cavity is the preferred option, if my 4 cavity turns out to be an oddball I'm happy to upgrade to a 5 to keep things simple ;)

I assume you will let us know when to start sending in the cheques, and I will also need to know how much extra to include for shipping to Australia.

I think the way NOE sets these up, a running a 4 cavity vs 5 should be no problem, but I always like having an extra bullet drop for the same amount of time and work, and not much more purchase money ;) It's your call though, I'll leave you marked for 4 unless you say otherwise.

I believe Al Nelson (Swede Nelson on the forum) will make contact when it's time to send in money for the buy. I'm sure he'll also be able to quote you shipping down under. I'll make a note by your details that it's going down there, just to be sure he see's it.

[Landric]

Can you put me down for a 3 cavity 3PB in addition to the 5 Cavity 5PB above?

Also, BUMP!!!

[happy7]

Sorry for the runaround. Please change mine to all gas checks.

[NoZombies]

No problem guys, List updated, and PM sent for clarification.

I'm really looking forward to this mold!

[gundownunder]

Just had a look at NOE's schedule, I can't see us on it. Is my eye sight failing me?
http://castboolits.gunloads.com/showthread.php?t=83330

[contender1]

I have an interest in adding myself to this group buy. I'd like a PB, HP 3 cavity mold. How do I get my name on the list?

I just registered here, even though I've been a lurker here a while. I am well known on the RugerForum.com as 'contender"
I've even been part of another group buy in the past via another member here.

[NoZombies]

Just had a look at NOE's schedule, I can't see us on it. Is my eye sight failing me?
http://castboolits.gunloads.com/showthread.php?t=83330

Good question, PM was sent to swedenelson a few minutes ago, I'll wait for his reply.

[NoZombies]

I have an interest in adding myself to this group buy. I'd like a PB, HP 3 cavity mold. How do I get my name on the list?

I just registered here, even though I've been a lurker here a while. I am well known on the RugerForum.com as 'contender"
I've even been part of another group buy in the past via another member here.

I'll add you to the list, and I responded to your PM to get clarity on exactly what you want. Welcome to the Board!

[gundownunder]

Just checked NOE's schedule again, we are on for April next year.
I wonder how much lead I can gather up in the next 6 months or so :-)

[NoZombies]

Yup, 7 months should give us all time to work on our lead stockpiles :) Of course, I have other .32 molds, so I'll survive until then, but man do I look forward to this one!

I've been kicking myself for not getting in on this design the first time through, but I'm glad I'll have the chance to now, even if I have to wait a little bit for it.

[ddixie884]

Please include me in this GB, 5 cavity plain base, please..........

[NoZombies]

Please include me in this GB, 5 cavity plain base, please..........

You're on the list!

[monadnock#5]

If not too late, I'd go for an all gc four cavity mould please!

[NoZombies]

If not too late, I'd go for an all gc four cavity mould please!

You're added to the list!

[shootingbuff]

Put me down for a RG4 (2PB & 2GC)
Thanks,

[NoZombies]

Put me down for a RG4 (2PB & 2GC)
Thanks,

You're added!

[ddixie884]

I'm on the road a lot, please PM me with the info when it is time to pay......THANX

[NoZombies]

I'm on the road a lot, please PM me with the info when it is time to pay......THANX

Will do!

[buffalo hunter]

I am inside. Aluminium 5 cavities BP

[NoZombies]

Sorry for the delay in updates guys, got called out of town unexpectedly. My inbox is cleared now too.

[OuchHot!]

I would like a 4cav PB. thank you

[Landric]

Bump for a great mould!

[OuchHot!]

nuts about .32's so bump....

[Bardo]

Anyone know how big the hollow point is? And how much they will wiegh?

Bardo

[NoZombies]

Sorry Bardo, I'm not sure. I'll ask NOE to post the info in this thread when he has the chance.

[NoZombies]

Bump!

[R. Flux]

The specification is .315 diameter. What metal is that? WW, Lyman #2, Pb, lino, etc.
The alloy can yield different diameters as cast. Just thinking about sizing or using as cast.

I've gotten softer (my alloys that is) over the years.

Thanks
R. Flux

[NoZombies]

As far as I know, the alloy specified is WW's. I do know that NOE can normally cut his molds a little oversized if needed. I can ask if that would be possible for this one if you like.

[starreloader]

I will take 2 of the 5-Cav PB

[NoZombies]

Well, we're getting closer! Only about 2-3 months out now.

NOE's schedule is here: Night Owl Deliver Schedule (http://castboolits.gunloads.com/showthread.php?t=142415)

[JBaisch]

I'm in for a 4 cavity, gas check

[R. Flux]

I 'd like a 4 hole PB please, add me to the list.
R. Flux

[NoZombies]

The list in post one has been updated.

Getting closer on this one... :)

[Czech_too]

I'm in for an RG4 PB

[Norseman]

I'm in for a 5 cavity PB

Shipping to Norway

Norseman

[MTtimberline]

I'm interested in a 5 cavity PB of this mold. New so just need to know the details of what to do for the group buys.

[NoZombies]

I'm interested in a 5 cavity PB of this mold. New so just need to know the details of what to do for the group buys.

Got the list updated, and I'll get a PM headed your way

[Dutch4122]

Please take me off the list for this Group Buy.

[NoZombies]

Please take me off the list for this Group Buy.

Updated the list

[NoZombies]

Guys, with the way the new NOE schedule is being populated, We'll all understand if anyone feels the need to drop out.

Read the discussion and new policies here: NOE schedule policy update (http://castboolits.gunloads.com/showthread.php?t=156593)

On the other side of things, if we can get a half a dozen more orders, we'll be moved up the list and might actually see this mold get cut sometime before 2013.

[SwedeNelson]

Doing a update
Will try to keep all buys current on the schedule:
http://castboolits.gunloads.com/showthread.php?t=142415
If you have questions about our policy you can see it here:
http://castboolits.gunloads.com/showthread.php?t=156593

Bump

Swede Nelson

[Fishman]

Hey NoZombies, put me down for a 5 cavity. Time to commit and help get this back on the schedule.

[NoZombies]

Hey NoZombies, put me down for a 5 cavity. Time to commit and help get this back on the schedule.

Gotcha On the list! sending a PM for clarity (PB or GC?)

Also added myself for a second mold. Never can have too many .32 SWC molds around, right?

[Czech_too]

Kindly change my order to a 4 cavity PB
Thanks

[NoZombies]

Kindly change my order to a 4 cavity PB
Thanks

Gotcha covered. :)

[frankenfab]

I will take a 5 cavity, all GC.

[NoZombies]

I will take a 5 cavity, all GC.

On the list!

[Landric]

Bump, I want to see this one make it onto the production list.

[NoZombies]

We're over the magic # now. Anyone who wants to get in can, and know that the mold will get cut.

The more folks we get involved, the sooner the mold goes to the machines.

[gundownunder]

Could you put me down for a second 4 cavity PB.

[NoZombies]

Could you put me down for a second 4 cavity PB.

Gotcha covered. Thanks!

[frankenfab]

Bump![smilie=w:

[Landric]

Bump for a great mould!

[NoZombies]

Another Bump, come on, there have to be other .32 shooters who feel the need for one of these?

[jaydub in wi]

This is perfect timing. Just bought a single six 32 h&r.
I'd like a 4 cav PB.
Thanks

[happy7]

I'm going to drop out of this one. Please remove me from the list. Thanks.

[NoZombies]

I'm going to drop out of this one. Please remove me from the list. Thanks.

Done.

The list should be up to date.

[contender1]

Any idea as to when this one will get into production?
Another bump to keep it alive!

[ddixie884]

Hope we get it soon.........

[NoZombies]

That's my hope as well, but it's not looking great...

[Bodydoc447]

Please add me for an RG2, plain based.

Thanks,
Doc

[NoZombies]

Please add me for an RG2, plain based.

Thanks,
Doc

Gotcha covered.

[frankenfab]

I am number 30 on the list. Please change my order to 4C GC, and add me for another 4C PB.

Thanks,

Frank

[NoZombies]

I am number 30 on the list. Please change my order to 4C GC, and add me for another 4C PB.

Thanks,

Frank

Cool beans. List updated

[MTtimberline]

What does the bump mean?

[NoZombies]

There are a number of explanations for the term "bump". probably the most popular is "Bring Up My Post" but it has essentially come to mean "let's keep this post in the first few pages os more people see it"

Hope that helps!

[MTtimberline]

Makes much more sense now. Thank you.

[NoZombies]

Come on .32 shooters! The more folks we get on the list, the sooner the mold gets run!

[Czech_too]

Kindly remove me, #24, from the list

[NoZombies]

Kindly remove me, #24, from the list

Taken care of

[sgt.mike]

Doubt I'll ever get a better mold put me down for a RG2 Plain Base.
Thank you

[slug]

I'm in for a 5 cavity plain base. Thanks.

[NoZombies]

Gotcha both on the list!

[gundownunder]

Good news, guys.
We have advanced to the short list, so it won't be long now.

[contender1]

Yeeehaaawww!!!!

[NoZombies]

:) That's good news for sure!

[Fluxion]

I know Im new here and all but I would like in on this!

Count me in for one 5 cav plain base

[NoZombies]

Welcome, and you're on the list!

[ldmcrook]

I want a 5-cavity, all plain based.

LDMCROOK

[jj850]

Ill be in for a 5 cav pb

[NoZombies]

Got you guys on the list.

[sgt.mike]

Well after today's news I guess I need to cancel my order (#32) will not be CONUS... Mid late summer depart until next year.
Sorry about cancelling out guys.
Hopefully after the tour I'll be able to catch this on a rerun.

[contender1]

Well, be are bumping on 2 months since we made "the short list." Any updates?

[DeadWoodDan]

Please add put me down for a RG4 2GC 2PB

[NoZombies]

Well, be are bumping on 2 months since we made "the short list." Any updates?

Sorry for the late reply, been out of the country, still away from home, but at least internet exists where I am now.

The list is up to date.

From looking at the NOE website, it looks like we should expect a May delivery timetable. I'd say we're in the home stretch now!

[AlanF]

How would this bullet function in a Browning Model 53 32-20? Anyone have any experience? Thank you.

[contender1]

Looking forward to May,,,!

[crash87]

Put me down for (1) 4-cavity PB
Thanks,
Crash87

[101VooDoo]

Please add me to the list - 4 Cavity, 3PB 1GC

Thanks,

Jim

[NoZombies]

All up to date. Getting close on this one!

[MTtimberline]

Looking forward to May,,,!

May is just around the corner...

[MTtimberline]

Can't wait to try this one out in the Ruger SSM Vaquero .32 H&R.

[MTtimberline]

Now that May is here it must be getting close...?

[NoZombies]

Now that May is here it must be getting close...?

Yessir, Just updating the initial post now with close date information.

[Dschuttig]

RG4 for me! Dschuttig at yahoo dot com Thanks, dan

[NoZombies]

RG4 for me! Dschuttig at yahoo dot com Thanks, dan

Sure thing, Did you want that PB or GC, or some combination?

[101VooDoo]

Just double checked my order and forgot to ask for the mould to be drilled for the probe.

36. 101VooDoo ......4 Cavity 3PB 1GC

If you'd add that to my order, I'd appreciate it.

[frankenfab]

Please add drill for probe to both my molds.

Thanks!

[Visible Miss]

Please add me to the list. I'm in for a 4 cavity Plain Base.

Thanks.

[jrayborn]

Please add me to the list. I'm in for a 5 cavity Plain Base.

Thanks.

jrayborn at myfairpoint dot net

[mustanggt]

Put me in for a 4 cavity, plain base please. mustanggt, mustanggt7atfrontierdotcom.

[NoZombies]

Alright guys, List updated, 2 days left to get in on this one!

[SwedeNelson]

PM's for payment sent

List of paid orders
1. NoZombies........ RG4 PB
2. GunDownUnder...4 Cavity PB (shipping to AUS)
3. Castblast...........5 Cavity GC drilled for probe
4. Nueces..............5 Cavity PB
5. Nueces..............RG2 GC
6. Landric.............3 Cavity PB
7. Landric.............3 Cavity PB
*8. Rusty W.......... 3 Cavity, 2PB 1GC
9. RedneckDan....RG4 2GC 2PB
*10. Contender1.....3 Cavity PB +1HP
11. ddixie884........5 Cavity PB
*12. monadnock#5..4 Cavity GC
13. shootingbuff.....RG4 2GC 2PB
14. Buffalo Hunter...5 cavity PB
15. Daschnoz.........RG2 GC
* 16. OuchHot!.........4 Cavity PB
17. starreloader......5 Cavity PB
18. starreloader......5 Cavity PB
*19. JBaisch............4 Cavity GC
20. R Flux.............4 Cavity PB
21. Norseman .......5 Cavity PB (shipping to Norway)
*22. MTtimberline....5 Cavity PB
*23. Fishman .........5 Cavity 3PB 2GC
24. frankenfab........4 Cavity GC Drill for Probe
25. frankenfab........4 Cavity PB Grill for Probe
26. gundownunder. 4 Cavity PB
27. jaydub in wi......4 Cavity PB
*28. Bodydoc447.......RG2 PB
29. Sgt. Mike...........RG2 PB
30. Slug .................5 Cavity PB
*31. fluxion ..............5 Cavity PB
*32. LDMCROOK .......5 Cavity PB
33. jj850 ................5 Cavity PB
*34. Deadwood Dan ..RG4 2GC 2PB
*35. Crash87 ...........4 Cavity PB
36. 101VooDoo ......4 Cavity 3PB 1GC Drill for Probe
37. NoZombies .......5 Cavity PB
38. Dschuttig ..........RG4 PB
39. Visible Miss ......4 Cavity PB
* 40. jrayborn ...........5 Cavity PB
41. mustanggt .......4 Cavity PB
*42. smlekid.........4 Cavity PB


(*) = Paid

Swede Nelson

[MTtimberline]

Al, pm sent regarding payment.

[smlekid]

Hi Swede is it to late to get in on this buy? looks like I may have just got hold of a '92 Winchester in 32/20 and am looking for a mould I assume this mould would work?
a 4 cavity PB would be nice

[SwedeNelson]

Updated list
This one will run next week
Get your payment in or pm me if you need to make other arrangements
Only going to run what is paid (and a few for inventory)

Swede Nelson

[castblast]

Al,
I would like to add a 5 cav pb drill for probe to my order. PM sent.

Thanks

[NoZombies]

Al, After going through my mold inventory, I realized, I don't need my second mold (5 Cavity PB) as I somehow managed to get one already (?!) so would like to remove that one. I still want the RG4 PB so I'll get payment out for that ASAP. PM on the way.