PDA

View Full Version : Newbie with ?



Southpaw 72
08-07-2011, 10:39 PM
Please bear with me,I haven't been casting for long. I recently started casting for a SRH in 454 and a bisley blackhawk in 41 mag. Getting good results for the most part. My 41 boolits are dropping at .412-.413. Cylinder throats are right at .410. Can I shoot these as cast or should I size them down? This is from a rcbs 210 swc. I made a dummy cartridge and it does chamber. Thanks in advance for your help.

mooman76
08-07-2011, 11:49 PM
Long as it chambers, you're good to go. Good shootin! And welcome to the board.

Southpaw 72
08-08-2011, 12:21 AM
Thanks mooman. So much info around here to take in, it's making my head spin.

Wayne Smith
08-08-2011, 08:02 AM
Thanks mooman. So much info around here to take in, it's making my head spin.

I've been here since '05 and my head sometimes still spins! Get used to it if you stay here. There are some awesome intelligences and researchers here who are willing to help those of us who are somewhat slower.

runfiverun
08-08-2011, 08:55 PM
and if they don't slip right in, you can often use your case sizing die to bump gently the loaded round enough to fit.

theperfessor
08-08-2011, 09:35 PM
How are you lubing your bullets if you're using them without sizing?

Southpaw 72
08-09-2011, 12:07 AM
How are you lubing your bullets if you're using them without sizing?

I'm pan lubing for now. Putting money back to buy a lubrisizer.