358009 Small Group Buy Alum

[Blammer]

I will be running the GB and we well be using Night Owl Enterprise (NOE) to make the moulds.

This will be for an aluminium mould.

We will be following the new NOE production schedule, see his website for details.

Post your order on this thread. I will keep the post below this updated with the orders.

You may order any number of cavities available. You will just need to pay the appropriate price.

1 cavity moulds are $68 ea.
2 cavity moulds are $72 ea.
3 cavity moulds are $79 ea.
4 cavity moulds are $85 ea.
5 cavity moulds are $92 ea.

The hollow point option for one cavity will be the standard $35.
Blank Hollow point pins will be an extra $1.50 each.

RG's not available

Plain base and GC options are available.
You may mix and match PB and GC in the same mould.
Shipping to you with insurance will be $10

A Lyman, RCBS type top punch is included along with a sample of Bull Plate sprue lube.

I'm the honcho

Darrell Steenwyk
112 Old Lime Kiln Rd
Arden, NC 28704

What you must do:
Send me a letter with your handle, your shipping address, what you ordered, and the money. (check or MO is fine)

The buy will remain open until one month prior to production. ONE MONTH PRIOR TO PRODUCTION I WILL CALL FOR PAYMENT. You do not need to pay prior to this, but you can if you want.
When I call for payment I will need all payments in within the week or you will miss out.

For those out of country please PM me for details on payment options and shipping costs.

NOE will ship them all to me and I’ll test cast with a few of them and then if all is well, send out the moulds.

Here is a link to the production schedule.

http://castboolits.gunloads.com/showthread.php?t=142415

Here are the pics with dimensions

http://castboolits.gunloads.com/picture.php?albumid=31&pictureid=4141

[Blammer]

Who wants what
All will be GC unless otherwise noted.

1 CAV
crash87 1C + HP
krag35 1C + HPPAID
mr peabody 1C + HP + extra blank pinPAID
bearcove 1C

2 CAV
nebulous 2C 1PB 1GCPAID
warboar 21 2C
geezer56 2C
part timer 2C
chuditch 2CPAIDPP6/15/13
jtaylor1960 2C
bearcove 2C ; drill for probeAdd a 1 cav GC mold for me. Change the 2 cav to a 3 Cav GC.
Divers454 2C + HP
mike 60 2C + HP Drill for probe
lkydvl 2C 1PB 1GC
gandydancer 2C 1GC 1PB + HP on GC


3 CAV
Alan 3C
garrisonjoe 3C
bubbaed 3C
castblast 3C; drill for probe
buckndee 3C + HP
35whelen 3C + HP + 2 extra blank pinsPAID
james.358 3C+HP+2extra blank pinsPAID
ole 3C 2GC 1PB
swheeler 3C PAID
charlie, aka the deacon 3C
bearcove 3C ; drill for probe

4 CAV
J.. 4C GC
RJM52 4C
greywuff 4C + HP
shakey jakey 4C 3GC 1PB
tctex 4C all GCPAIDHP credit applied to 41mag GB mould
midnight 4C ; drill for probe
J.. 4C

5 CAV
flycutter 5C +HP; DFPPAID
Maverick61 5C 2 PB 3 GC + HP + blank pin
rockrat 5C 3GC 2PB

[lkydvl]

I'd like a two (2) cavity one PB one GC.
Thanks,

Andre'

[crash87]

I almost missed this one. For now, it may change, but, put me down for a;
1 cavity / GC
crash87

[Blammer]

list updated.

[Ole]

Blammer:

Please put me down for a 3 cavity mold. 2 GC and 1 PB.

Thanks.

[part_timer]

Please put me down for a 2 cavity GC

[Blammer]

updated on post #2

[35Whelen]

Hello Darrell.

I think this will complete the run then...with 5 orders.

I will take a 3 cavity mould gas checked
1 Cavity to be hollowpointed please. If the hollowpointing tool can come with a reversible pin to make a flat point that would be greatly appreciated....or send me a blank pin to make my own flat point out of it please.

Please PM me with a total including the shipping amount you quoted me in the previous PM

Thanks for doing this.

Paul

[frankenfab]

I will take a 3 cavity GC with one cavity HP. Can we get a drawing of the HP to drool over?

Thanks, Blammer et Al, for handling this buy.

[35Whelen]

Frankefab.....not a drawing but I did find this pic on the web. Not my pic, so I can't take credit, but pretty sure it was someone from this forum.

Can hardly wait to start casting these buggers up.....some serious bear medicine.

[crash87]

So Guy's,
Where are we at with this buy? Are we on the production list? Is it going to happen? Give me something....Anything.
Crash87

[35Whelen]

I couldn't find anything on the production schedule link......maybe it just hasn't been updated?

[midnight]

Put me down for a 3 cavity gas check. Hollow point 1 cavity. I just bought a 35 Whelen last Sunday.

Bob

[Blammer]

yea not updated on the production schedule.

I PM'd NOE about it.

[SwedeNelson]

Updated
A little over ran the last two weeks,
But getting orders out!

Swede Nelson

[Blammer]

list updated.

[Mike_60]

Please forgive my stupid question, but how would this bullet work in a Model 7 350 Remington? This really is turning into an illness. I don't even have that rifle yet but have been wanting one for a long while and purchasing a mold would make an excellent excuse to buy the rifle. :bigsmyl2:

[sundog]

Mike, it's all about twist with this boolit. Some here have reported being able to get it to work with a 16 twist, some not. Fourteen twist will work. This is an extremely good boolit in the 35 Whelen (for one), and pretty to look at, too.

[35Whelen]

It is a long bullet...I would perhaps be concerned with it taking up powder space. Not sure how long the neck is on the 350, but if I recall correctly, it is a shorter neck than the Whelen.

[Blammer]

updated

[kokomokid]

Can I get in on this one with a PB one cavity? THANKS LB

[Blammer]

updated post #29

[Ole]

Blammer:

Are you asking for payment now, or will you be doing that via PM?

[Blammer]

I will do that via PM, about a month prior to production.

This is a ways off.

[kokomokid]

Change mine at next update to a 2C 1PB 1GC. THANKS

[Blammer]

updated

[Alan]

Put me down for a 3 C all GC's.

[Blammer]

updated post #36

[chuck4570]

If you get a mold with a hollow point cavity, can you pour all the cavities but the hollow point and not effect the quality of the other bullets? Sometimes you just want ease of operation.

[NYBushBro]

Please sign me up for a 2-cavity GC w/ HP. Thanks.

[Blammer]

chuck4570, yes if you get a 4C + HP, one cavity will be hp the other 3 will be normal. Yes you can just cast with the three and not use the HP cavity. Works just fine.

[chuck4570]

Thanks Blammer! Put me down for a 4C +HP

[Blammer]

updated

[greywuuf]

GOT to have this!
4 cav GC HP

[Blammer]

updated post #41

[bullshot]

FYI-- I bought this mold in the original GB. It shoots well in my Rem 700 35 Whelen. I then tried paper patching it with and without a gas check in my Ruger #1 in 8.3X74R. Shoots under an inch at 100 yds with or without the gas check. Just thought I would mention it to open the GB to those with 9.3s. I have a 9.3X62 that's next on the list to try.

[midnight]

Like bullshot I'll be shooting this bullet in a Rem 700. It has a Kreiger barrel with about 50 rounds through it so I expect a lot from it. With luck I may have a load for the 2012 deer season. I'm also in the 245gr 358318 group buy but thats on the August schedule.

Bob

[bullshot]

For those that read my incorrect post about paper patching a 8.3x74R , I meant to type 9.3X74R. Sorry, however it still shoot very well.

[Chill Wills]

In for a 2C 1PB 1GC. THANKS
Loaned the Lyman and never got it back!

[Blammer]

updated post #45

[kokomokid]

Hope this will work in my 35/40 maynard for chickens.

[Blammer]

chickens aren't hard to kill, maybe you have too much gun? :D

[no34570]

Darrell
I'll take a 3C +Hp please ;)

[Blammer]

updated post #49

[pcw907]

I'll take a 2 cavity, both gas checked.

Thanks

pcw

[Blammer]

pcw, you're in

[buckndee]

I want a 3C, GC, +HP

buckndee

2hunters2 at comcast dot net

Thanks
Buck

[Blammer]

updated post #59

[boogerloo]

Anybody know what the twist is on the older Ruger flat bolt 350 Remington Mag?

[felix]

16 unless for certain otherwise. ... felix

[boogerloo]

So 16 would be marginal on this bullet?

[felix]

Yes. ... felix

[boogerloo]

To get a bullet that will work on a 16, do I need shorter or lighter? Or both?

[Blammer]

shorter, just shorter should do it.

[bearcove]

When is this going to be made?

Just got another 35 Whelen with a 14 twist. Have about 200 of these to try before I decide.

[35Whelen]

Yippeeeee !!!!! I see we are no officially on the work schedule. June of this year !!!!! Just in time for bear season up here ...and some time to work out a load for the fall.
...Cool !!!!!!!

[Chuditch]

Please put me down for a 5 cavity mould
3 GC and 2 PB.

I am in Australia but don't let that stop you taking my $!

PM sent!

[Blammer]

updated post #64

[Chuditch]

Sorry for the trouble, can I please change my order to ;
2C, GC for both.
Thanking you.

[Blammer]

no problem

[MJR007]

I want to but maybe just a little to long for the 358win.

[SquirrelHollow]

See post #69

[Blammer]

updated #68

[midnight]

Shameless bump.

I now have a Hoch nose pour 360285 to use to shoot side by side with the 358009 when it comes. Should be interesting.

Bob

[midnight]

Hey Blammer, I neglected to add "drill for probe" to my order. BTW the above mold cast some 287gr boolits from WDWW today.

Bob

[Ronb]

I'd like a 2 cav GC. It might be just the thing for my Norma.

[Blammer]

updated post #78

[SquirrelHollow]

Blammer, change mine to a 1C GC, no HP.



I am absolutely sick and tired of fighting NOE and Lyman HP molds (nothing against NOE's execution -- it's just an annoying design).

[Blammer]

no problem.

[RJM52]

If it is not too late please put me down for one 4-cavity all solids with gas check base.

PayPal/email address:

vitalsupply at metrocast dot net

Thanks...Bob

[Blammer]

updated

[SquirrelHollow]

FYI people, we've been bumped to August on the production schedule. :-(

[kokomokid]

Need to change mine to 1c-pb, I cant cast but one good bullet at a time. THANKS LB

[Blammer]

updated

[MJR007]

I leave for bear camp 5/25 and this mold would have made it more fun. The 358win is set-up with 250 GR RN and Varget....

[jtaylor1960]

If you would please put me down for a 2 cavity GC no HP.Thank you.

[Blammer]

updated post #82

[castblast]

Been looking at this one for awhile. I'll take a 3 cav gc drilled for probe.

[TCTex]

This is going to hurt…
Put me down for a 4 cavity mold with two hollow point options
I would like all cavities to be Gas Checked.
85+35+35+10=165
I don’t know what would be the best way to make it happen so have fun with it. LOL

Make sure my math is right and keep me honest!

Duane

[DEVERS454]

Put me down for one as well.

2 cavity, one with a hollow point. Both with gas checks.

I might take and build up a 35 whelen from a 1903a3 barrel I have laying around and an action to go with it. ;)

[Blammer]

updated post #86

[bearcove]

Put me down for a 3 cav GC , 1HP and 2 extra pins

Thanks, Rod

[Blammer]

updated

[no34570]

Blammer
Can you take me off this one please,going to get an Accurate Mold done for PP my 9.3x62mm
Sorry mate :)

[Blammer]

updated post #91

[crash87]

Blammer, Can I add a HP to my 1 cav, gc?
crash87

[bearcove]

Forgot drill for probe

[Blammer]

updated

[midnight]

hey Blammer, please remove the hollow point from my order. I'm #7. Thanks.

Bob

[Blammer]

updated post #2

[midnight]

Please read Swede's post "Future Group Buys" in group buy discussions. After July 2012 we need 30 orders to get on the production schedule. Those with less than 30 will continue to get pushed back as others teach 30. We have 25 in this GB. We need 5 more right now! Get off the fence if thats where you have been sitting. The ball is in our court now.

Bob

[Blammer]

yes, we could fast track this to the top! (if we got 20 more.. :)

worst case scenario, we are where we are now and we wait and hopefully none others get fast tracked ahead of us.

[bearcove]

The way I read it this would be a good canidate for an inventory run and that would be the fastest track.

Existing tooling!

[Blammer]

ooooooooooooo! Good thinking!

I'm definitely liking the new system now!

[SwedeNelson]

Doing a update
Will try to keep all buys current on the schedule:
http://castboolits.gunloads.com/showthread.php?t=142415
If you have questions about our policy you can see it here:
http://castboolits.gunloads.com/showthread.php?t=156593

Bump

Swede Nelson

[bearcove]

Change mine to:

3 cav 1 PB 2GC
1Cav GC w/ HP

[Blammer]

updated

[RJM52]

Please forgive my stupid question, but how would this bullet work in a Model 7 350 Remington? This really is turning into an illness. I don't even have that rifle yet but have been wanting one for a long while and purchasing a mold would make an excellent excuse to buy the rifle. :bigsmyl2:

I have five .350s and a .358...just always wanted to try a real heavy.... If it doesn't work we go to plan B...whatever that is....

Just did some measuring... With the LOA of the bullet the base of the bullet will be about even with the bottom of the shoulder of the case. This bullet is exactly as long as a Hawk 250 grain Semi-Point. Should work ok....

Bob

[AlabamaEd]

Put me down for a 2 cav gc please. Thanks

[SquirrelHollow]

Doing a update
Will try to keep all buys current on the schedule:
http://castboolits.gunloads.com/showthread.php?t=142415
If you have questions about our policy you can see it here:
http://castboolits.gunloads.com/showthread.php?t=156593

Bump

Swede Nelson

For some reason, I never got an update notice, when Swede posted this, or when the previous discussion was going on about the change. (And I haven't been on the forums much, to see that a change was implemented.)

So... This means, for this buy, that we're pretty much stuck here until we get 30 orders.

This is not a popular bullet, and has taken more than a year to get the 25(?) molds currently on the list, and took a while before that to get enough interest for the buy to even be created.

Many other buys pick up orders far quicker than less popular bullets like the 358009. So, as long as another buy exceeds the number of orders we have here, they will always take precedence and bump us back. Correct?

And, since production is locked through at least January, we have absolutely ZERO hope of seeing this mold before, say, April 2013?


Blammer, Swede, am I wrong?

[Blammer]

Production is not locked through January.
IF no more orders are taken on any of the moulds that is the current order they will be made.

two things could occur.

1. NOE runs this as an INVENTORY run and you get it sooner.

2. we get a lot of orders and it 'bumps' to the front of the line or up the list some.
any GB can be 'fast tracked' meaning there are a LOT of orders for it an it gets put at the top of the 'get it made' list.

say for example Mould A and Mould B both have 25 orders and are on the list, if Mould B gets 5 more orders it will be made first.
By the same token, if Mould C comes along and suddenly becomes really popular and has 40 orders in a week or two, it will rocket past the first two mentioned above, it will be made first.

[frankenfab]

Don't think so. I believe there are going to be 1 or 2 "inventory runs" a month for molds that NOE already has tooling for. This mold has already been run, so they already have the tooling.

[SquirrelHollow]

Blammer, I understand the new policy's theoretical operation. What I was referring to, was the actual impact on this buy (the 358009).

If we managed to get another 5 commitments for this mold, even over 5 months, I would be surprised.

We COULD be bumped up by being put on the schedule as an "Inventory Run", but the I doubt that would happen. Even with Swede already having the reamer(s) for this mold, this is the second oldest group buy on the "waiting for 30 orders" list.

The fact that it is unpopular would definitely prevent me from making it a priority as an "Inventory Run", if I were in Swede's position. He is, after all, running a business, not a charity.
In addition, I spoke to Swede about this bullet, while in his shop last year. He expressed some frustration about complaints related to wrinkles, poor fill-out, and temperature issues due to nose design and cavity size. I don't think Swede wants to deal with the (even minor) frustration this bullet may create, if he has other no-complaint "money makers" that can be run first. Obviously, only Swede knows, for sure.

I'm just looking for an answer that will give some clarification as to this buy's future (at least through the end of the year). If I have to wait another year to see this mold, I'll have to drop out of this group buy and have some one else cut one for me. But, I know that sets the entire group buy back (under the new policy); so I was hoping for an answer that everyone involved in the buy would be able to read and understand.

[frankenfab]

Blammer,

Please remove me from this buy. I am jumping ship to the RCBS 35-200.

[kokomokid]

Drop me also, THANKS KOKOMOKID

[Blammer]

updated

[bearcove]

I guess people are voting now. I hope this gets some time frame soon. The inventory runs could be decided and we could get back to having a schedule. Hint! Hint!

[SquirrelHollow]

Blammer, please take me off the list.

I would have posted my thoughts in the discussion thread for this buy, but it seems to have been deleted.
I needed this mold for this year's Elk hunt. Even with Al's constantly "sliding" schedule, I should have gotten the mold in time. The change in policy, of course, eliminated nearly any possibility of that happening. The change in policy was needed, as frustrating as it is; but it doesn't work for me, with this particular mold.

Honchos like Blammer (and Al) are seeing some buys really take off with fence-sitters finally committing to other buys, or members ordering multiple molds to get on the schedule. So, it looks like things should work out for Al. But... those other buys taking off are not conducive to me getting this mold in a reasonable amount of time.

In the last 2 weeks, 5 other group buys (128, 126, 107, 117, and 112) have hit or exceeded the 30-mold threshold. For all intents and purposes, they are committed to going on the schedule. In addition, 6 other buys (105, 136, 116, 134, 144, and 115) have more molds ordered than this buy, with a few picking up orders quite fast. (GB105 may actually have 30+ orders - the count seems to be off, or the list not updated.) Which means... without an increase in production capability or a complete failure for multiple other buys to get all the money together, the earliest this buy could go on the regular production schedule would be July 2013 (not counting any time lost to holidays or other delays).

I just can't wait that long. Even if we managed to get on the schedule as "early" as March or April, it would still be too late for me. I look forward to future group buys, once this nasty transition period is over. But, I can't wait on this mold any longer.

So, rather than sending my money 25 miles south to Al, I'm going to have to send it 25 miles north to Tom (Accurate). That will also allow me to get the brass mold I've wanted all along.

Sorry for bailing out on you guys. Hopefully, Al will schedule the 358009 as an inventory run, so the buy doesn't sit in limbo forever.

[Blammer]

updated

[SwedeNelson]

bearcove, others

With everything that is going on at this time I'm just trying to get
the next 2 or 3 months worked out.

I think any kind of a "Inventory" run at this time would be foolhardy
and a schedule for inventory runs would be just another guess. I'm not going to
even try until I have some of the problems at hand taken care of.

On a up side we have two very encouraging things in the works that
I hope will get us back on track and get more moulds out.
Hope to be able to expand on this in a week or two.

I'm very sorry that I cant give you better answers but this is where we are.
Swede Nelson

[chuck4570]

Sorry, I need to drop out on this one also.

[Blammer]

no problem, updated

[Blammer]

updated

[Chill Wills]

Sorry, can not wait. Please take me off the wait list. Maybe next time.
Thanks to all for the efforts!
Chill Wills.

[Blammer]

no problem, updated

[greywuuf]

Blammer,
Where are we at on this ? The list at post #2 or the one at post #8?
(I hope it is#2)

homeland defense begins at home.

[Blammer]

yep post #2 is the right one.

[AlabamaEd]

Please change my order to a 3C GC + HP mold.

Thanks,

[Blammer]

updated

[Maverick61]

Can I order a 5 cavity mould please 3x GC (1xHP) & 2xPB plus the blanking pin.
Thanks.
Hope to hear from you soon.
Regards - Maverick61

[Blammer]

updated

[garrisonjoe]

Howdy. I'd like to get on the list, 3 cavity all GC.

Thanks and wishing you luck! Garrison Joe

[Blammer]

updated

[TCTex]

BTT


Duane

[TCTex]

Chief potentate Blammer,

Considering this thread is over a year old, do the prices need to be adjusted, ever so slightly, to compensate the current production costs? I it cost me an extra 5 or 10 and keep NOE around. I am growing fond of their molds… LOL

V/R

Duane

[Blammer]

Prices have not changed. :)

[TCTex]

Not a problem and thanks!


Consider this conversation a shameless bump.

[bearcove]

Bump cause Al wants to run this soon. Can't wait.

[warboar_21]

Has anyone shot these from a Model 7 350 Rem Mag? If it works then I would certainly be interested.

[James.358]

I'd like to order a 3 cavity mould please 3x GC (1xHP).

Cheers. James

I read the payment directions - do you now do PayPal as well? (+3% or whatever)

[Blammer]

updated, no I'll pm when it's time for payment

[TCTex]

Has anyone shot these from a Model 7 350 Rem Mag? If it works then I would certainly be interested.


Warboar, Give me until tomorrow evening. I just picked up about 5 or 6 Lyman manuals and I know the 350 Rem Mag was in at least two of them. I will see if they have anything listed for the 358009.


PS, I remember the 350 being listed because I was looking for the data on the 35 Whelen and not a single book had any. They all went from 358 Win to 350... LOL


Duane

[TCTex]

Warbore, the ONLY bullet I could find listed for the 350 Rem Mag over 250gr in the 16 manuals I have and looked in was the 275gr Hornady bullet in two old Hodgdon manuals...

Duane

One of the listings was in a first print, first addition Hodgdon book bought in 1977...

[bearcove]

Budget has changed, So change mine to a 2 cav GC no hp.

Thanks, Rod

[Blammer]

updated

[TCTex]

Thought I would give a little teaser...


358009 bullets in a 35 Whelen (L) and a 357 Herrett (R).


Both bullets have been set .02 off the lands and they look textbook, or close to it IMHO. I wonder how a 270gr HP will do out of a 26in Encore barrel in 357 Herrett?


http://www.handgunhunt.com/photopost/data/545/photo_10_.JPG?9172

[warboar_21]

Looks great TCTex. I have been searching (to no avail) for data on the 350 so I can load these up and give em a whirl. Am thinking to just use Whelen data as several of my manuals have them both at about the same charge weight for same powders. I would drop the charge by 10% or so just to make sure i'm safe.

BTW in the 47th edition of Lyman's book they have a listing for the 35Whelen and this bullet. If you haven't found the data yet let me know and I can send the data to you.

[bearcove]

Don't use whelen data. The cases are similar in capacity but different shape. Powder burns different

In ken Waters pet loads he has load data for 300 gr Jacketed. I would use that. Then work up if you wanted.

[TCTex]

Daaaa bump...

[35Whelen]

TCTex.

Your pic of the Whelen next to the Herrett, looks a little long in the body and steep in the shoulder. Is that a Brown Whelen, or Improved?

[bearcove]

Looks like a Brown to me.

[Nrut]

Has anyone shot these from a Model 7 350 Rem Mag? If it works then I would certainly be interested.
This bullet may not fit within the confines of your M7 2.8" mag box...
Take the measurement of the bullet nose length in the drawing and add it to your case length to see if you are under 2.8"..

[TCTex]

TCTex.

Your pic of the Whelen next to the Herrett, looks a little long in the body and steep in the shoulder. Is that a Brown Whelen, or Improved?


It is actually a 35-06 JDJ...


Duane

[Wildwood-Lake]

Put me in for a 4 cavity, 3 GC and 1 PB

[Blammer]

updated

[Shakey Jakey]

I'm in for a 3 cav GC

[Blammer]

updated

[Mr Peabody]

Put me down for a 2 cavity.

[Blammer]

updated

[bearcove]

Ready for this one to close too?.....

[Blammer]

no, not yet

[FLYCUTTER]

5 cavity GC + HP + drill for probe will work for me please

[Blammer]

updated

[krag35]

Please sign me up for a 3C Gas check.

[Blammer]

updated

[Shakey Jakey]

Blammer, Not trying to rehash the logistics of the GB priorities, but, shouldn't this be scheduled? I count 28 commits and we only needed 5 to get booked, or at least thats what I'm reading. Do we have a projected date?

[Blammer]

since NOE reorganization of his company, to find out when it will be produced, it is best to check out his website.

[Charlie, AKA The Deacon]

Is this open?

[Blammer]

yes it is still open.

[Charlie, AKA The Deacon]

put me in for a 3 cav PB

thank you

[Blammer]

updated

[SquirrelHollow]

Blammer, Not trying to rehash the logistics of the GB priorities, but, shouldn't this be scheduled? I count 28 commits and we only needed 5 to get booked, or at least thats what I'm reading. Do we have a projected date?

With the current schedule, and current active GB counts, my best guess puts this as #2 for August or #1 for September. So, delivery would likely be October (later, if the schedule slides, or another buy supersedes this one).

But, as I said, that's just my best guess. NOE makes the decisions -- though, Al is very aware of this GB.
(He already has the tooling, and it's one of the oldest active group buys with more than a dozen or so commitments.)

[Shakey Jakey]

I spent some time studying the new policy last night and it seems that this could run at any time as an "inventory run" since the tooling is already on the shelf. Its the more obscure boolits that have not ever been cut yet that could be years in line. Actually, this one and the 35-200 are excellent candidates to be cut soon, if I am interpreting the situation correctly.

[Charlie, AKA The Deacon]

On mine I do need Gas Checked thanks for the change

[rockrat]

I think one more will get it to the magical 30. If so, put me down for a 5 cav. 3gc/2pb

[Blammer]

updated

[krag35]

I'm not sure what I was thinking, but could mine be changed to a 1 cavity GC hollow point?

[Blammer]

updated

[Shakey Jakey]

Bump to the front!

[midnight]

I see a Lyman 3589 just went up on Ebay. Starting bid is $75. I'll just watch it and see what it goes for. We are going to get a better mold at a lower price from Swede.

Bob

I see it just sold for $155.45.

[midnight]

I see a Lyman 3589 just went up on Ebay. Starting bid is $75. I'll just watch it and see what it goes for. We are going to get a better mold at a lower price from Swede.

Blammer: Could you change my order to a 4 cavity, drill for probe. I'm #4 on the 3 cavity list.

Bob

[Blammer]

updated

[bubbaed]

I'm in for a 3 cavity, all GC.

[Blammer]

updated

[James.358]

Hey Blammer - could you update me too:
3C, with 1 HP + 2 extra blank pins

Cheers and Thanks
James.358

[Blammer]

updated

[SquirrelHollow]

Bump...

[Charlie, AKA The Deacon]

Any idea when this might run? I looked on the web site I thought it said (in shop Dec.)

[Blammer]

since the reorganization of the GB's by NOE and the addition of a machine for NOE things have changed.

I know NOE is trying desperately to get through this back log of GB's as fast as possible. When that happens, he'll then be able to move on making moulds on demand. :)

[SquirrelHollow]

Any idea when this might run? I looked on the web site I thought it said (in shop Dec.)

I don't see it on the schedule, yet.

[Blammer]

PM Swedenelson he may have an idea on it.

sorry I do not.

[TCTex]

Could that have been the "360365 280Gr. SP?"

Just asking.

[bearcove]

Go to NOE site GB delivery schedule, at botton are three buttons over 30 over 15 under 15. Clik those to see more list.

[Shakey Jakey]

Bump to the top

[280Ackley]

Put me down for a 4 cav. 2 GC, 2PB

Thanks

Jeff

[Blammer]

updated

[Shakey Jakey]

Time for this to float back up to the top.

[35Whelen]

Looks like Swede has this on the schedule now for July !!!!!

Oh I can hardly wait.......LOL

[Blammer]

updated, still open, no call for payment yet, still waiting

[Ronb]

I think I'll pull out. Other priorities these days. I bought another mold from Swede though....

[swheeler]

Blammer put me down for a 3 cavity, 2 GC and 1 PB

[Blammer]

updated

[Blammer]

updated

[midnight]

I remember last year hoping to have this bullet for the November deer season. Well I just may have it for the 2013 season. Better late than never. In the meantime I found a Hoch 280gr RN. Between the two of them in the 35 Whelen, deer are toast.

Bob

[nanuk]

just doing some preusing

noticed James.358 post requesting an update on his order...

Hey Blammer - could you update me too:
3C, with 1 HP + 2 extra blank pins

Cheers and Thanks
James.358


but it appears James.358 is on the list for TWO moulds now....
3 CAV
.....
james.358 3C + HP
35whelen...
james.358 3C+HP+2extra blank pins
....


just putting it out there, in case it was in error.

[Mike_60]

Please add me for a 2 cavity GC + 1 HP and drilled for probe.

[Blammer]

Updated

[Shakey Jakey]

Please change mine to a 4 cavity 3gc 1pb. Thanks

[gandydancer]

wonder how well this will work in the 357 max?? http://castboolits.gunloads.com/picture.php?albumid=31&pictureid=4141

Can I get a 2 cav 1 HPGC & 1 PB thanks. gandy

[Blammer]

updated

[geezer56]

I will take a 2 cavity on this one.

[Blammer]

updated

[warboar_21]

Well I finally got around to loading and shooting these bullets that TcTex sent me awhile back. They didn't keyhole out to 100yds and looked like they might actually work out of my 350 Rem mag.

So with that said could I be added to the group buy with a 2 cavity gas checked mold?

[Blammer]

updated

[TCTex]

Blammer, per our PM’s, I would like to take the two HP’s off this mold. Please apply the 70 dollar balance, (35x2) towards the 41 group by you are heading up.

Thanks

Duane

[Blammer]

updated

[pcw907]

please remove me from this GB. Thanks.

[Blammer]

updated

[J..]

4-cav GC, plz

[Smokepole50]

Does anyone know if these will fit and feed in a Mauser action? I am very interested in joining this buy both for my 35 Whelen and my 9.3x62 and 9.3x57. Just wondering how they fit and feed before I jump in here at the last minute.

Smokepole50

[Blammer]

updated

[Wildwood-Lake]

I would like to be remove from this GB. Thanks

[Blammer]

updated

[Mr Peabody]

I know this buy is getting close and I'd like to change mine from a 2 cavity to a single cavity, hollow pointed with a blank pin too.

[Blammer]

updated

[Mr Peabody]

Gas checked too, sorry for the late post

[swheeler]

Blammer; make all 3 cav gas checked, I don't need no steenkin plain based;)


Hello?

[Blammer]

updated

[280Ackley]

I'm dropping out of this one.

[Blammer]

not a problem.

updated

[Blammer]

HERE WE GO!

I got the word from NOE to make last call!

That means in a week I'll close the thread for additional orders and make a call for payment!

then soon enough we'll get our moulds!

Yeeehaw!

[Chuditch]

Yeehoo! Good news to my ears :-)

[swheeler]

I'm ready, let's kill something!

[bearcove]

Add a 1 cav GC mold for me. Change the 2 cav to a 3 Cav GC.

Thanks, Rod

[Blammer]

paid list updated

[Nebulous]

I would like to place my order,
2 cavity - 1 plain base, one gas check

Thanks HHB

[Blammer]

update

[Chuditch]

Pm me with details on how to pay international order to Australia please. Thanks.

[Maverick61]

Same re PM on how to pay from the UK for my order.
Thanks.

[Blammer]

updated

[Blammer]

this buy is closed! PM has gone out for call for payment.

those outside of the USA read the PM and go from there!

Darrell

[Blammer]

updated

[Shakey Jakey]

"The check is in the mail"