429421 Keith NOE RERUN

[Blammer]

I'll be running this buy, per NOE.

Here is the current production schedule
http://castboolits.gunloads.com/showthread.php?t=142415

Post your order on this thread. I will keep the post below this updated with the orders. This is already on the production list. I will take money and orders until about one month prior to production. I will then close the buy and do last call for money.

THE BEST PLACE TO CHECK TO SEE IF YOUR ORDER IS GOOD IS HERE AT THIS THREAD. I WILL POST "PAID" NEXT TO EACH NAME AS I RECEIVE THE PAYMENTS. IF YOU DON'T SEE A PAID NEXT TO YOUR ORDER AND YOU HAVE PAID, PM ME!

When the buy is moved to the CLOSED thread topic, no more changes or add in's will be made. If you are not paid you'll be dropped off the list.

You may order any number of cavities available. You will just need to pay the appropriate price.

1 cavity moulds are $68 ea.
2 cavity moulds are $72 ea.
3 cavity moulds are $79 ea.
4 cavity moulds are $85 ea.
5 cavity moulds are $92 ea.

1 cavity hp on the above moulds $35, extra pins $1.50

RG2 $96
RG4 $126
Set of extra Blank pins for the RG2 $4
Set of extra Blank pins for the RG4 $8

Shipping to you with insurance will be $10
for more than one mould, shipping with insurance will be $ 15
A Lyman, RCBS type top punch is included along with a sample of Bull Plate sprue lube.

What you must do:Send me a letter with your handle, your shipping address, what you ordered, and the payment. (check or MO is fine)

Darrell Steenwyk
112 Old Lime Kiln Rd
Arden, NC 28704

IF YOUR LETTER DOES NOT CONTAIN THE ABOVE ITEMS, IT MAY GET 'LOST' AND AS A RESULT YOU MAY NOT GET WHAT YOU ORDERED.

For those out of country please PM me for details on payment options and shipping costs.

NOE will ship them all to me and I’ll test cast with a few of them and then if all is well, send out the moulds.

a picture to drool over :) Courtesy of NOE
http://castboolits.gunloads.com/picture.php?albumid=432&pictureid=4066

http://castboolits.gunloads.com/picture.php?albumid=432&pictureid=4065

http://castboolits.gunloads.com/picture.php?albumid=432&pictureid=4064

[Blammer]

Shipped 10/9/12


1. 376steyr 5CPAIDShipped 10/3/12
2. jumping frog RG4+extra set of pins PAIDShipped 10/9/12
3. timkelley RG4 PAID Shipped 10/6/12
4. contender1 4C +HP + extra pin (will pick up from me)PAIDDelivered
5. dutch4122 5C PAIDShipped 10/3/12
6. landric 3C PB PAIDShipped 10/6/12
7.
8.
9.
10. gvanzeggelaar RG4PAIDPPShipped 10/9/12
11.shawnsmc 5CPAIDShipped 10/9/12
12. nicholst55 4CPAIDShipped 10/3/12
13. ratboy RG4 PAIDShipped 10/6/12
14. NVcurmudgeon 3C PAIDShipped 10/3/12
15. WDS RG2 +extra set of pinsPAID in fullShipped 10/6/12
16. caw 5CPAIDPM ME I NEED YOUR ZIP CODE
17. johnR 4C +HP + extra pin ;drill for probePAID + temperature unit ship from NOE's headquarters. :)Shipped 10/9/12
18.
19. roughone 4CPAIDShipped 10/3/12
20.
21. lucas RG2 + extra set of pinsPAIDShipped 10/9/12
22. lucas 2CPAIDShipped 10/9/12
23. kevh RG2PAIDShipped 10/9/12
24. starreloader 5CPAIDShipped 10/9/12
25. starreloader 5CPAID Shipped 10/9/12
26. PBhurler RG2+extra set of pinsPAIDShipped 10/9/12
27. PBhurler 4C PAIDShipped 10/9/12
28. SMCCORD 5CPAIDShipped 10/9/12
29. gussiegoins2 RG4PAIDShipped 10/9/12
30. loony44 RG4PAIDShipped 10/6/12
31. jeeedbb RG4 PAID Shipped 10/6/12
32. LET CA RG4PAIDShipped 10/6/12
33. bigscot RG4PAIDShipped 10/9/12
34. jethunter RG4+ extra set of pins; drill for pobePAIDPPShipped 10/9/12
35. tudor8055 RG2 PAID Shipped 10/6/12
36. atom73 RG2 ;drill for probePAID
37. hoagie214 4C PAIDPPShipped 10/9/12
38.shootnsteel RG4PAIDShipped 10/9/12
39. IIJSavoy RG4 + extra set of pinsPAIDShipped 10/3/12
40. shootnsteel 4CPAIDShipped 10/9/12
41. shaky RG2PAIDShipped 10/9/12
42. Hans 2CPAIDShipped 10/3/12
43. balduran RG4PAIDPP shipped
44. Bjornb 4C + HP + 2 extra pinsPAIDShipped 10/9/12
45. hcr RG4PAIDShipped 10/3/12
46. stick man RG2 (LOCAL PICKUP and pay)
47. stick man 4C (LOCAL PICKUP and pay)
48. sergraf 3C + HP + extra pinPAIDShipped 10/9/12
49. Mr Peabody 3CPAIDShipped 10/3/12
50. docdorle RG2 + extra set of pinsPAIDPOOF SUDDENLY DELIVERED! :)
51.docdorle 2CPAIDShipped 10/9/12
52. H.Calahan RG2; drill for probePAIDShipped 10/6/12
53. alabamaed 4CPAIDShipped 10/9/12
54. stevep 3C;drill for probePAIDShipped 10/6/12

[376Steyr]

Can't help myself, Must ask before anybody else does: Can I get this in brass? With a round nose? And in .425 to fit a European 44-40 my uncle brought back from WW II? There. I feel much better now.

I'll take a standard 5 cavity. Thanks!

[41 mag fan]

I'll take a four cavity. No HP please.

[timkelley]

Please put me down for an RG4.

[Blammer]

list updated

[captain awesome]

I will bite give me an RG2

[bearcove]

Missing one of these in 44cal for some reason must fix that

Put me down for a 5-cav.

Thanks, Rod

[Blammer]

updated post #20

[Landric]

I'm in for a three cavity 3PB.

[Greg G]

I was on the first list in the thread that got closed.

But January is too far out for me. I'm out.

[Blammer]

not a problem greg g, if you change your mind just jump in before then.

[captain awesome]

would it be possible to get an extra set of flat pins to do solids in the rg's also?

[Blammer]

captain awesome, the RG's come with two sets of pins, standard

one set is for the HP's
the second set is for Solids (aka flat points)

:)

[Aaron]

Blanker

Add me for a RG4. I will try not not to screw. Payment this time. :-0

Aaron

Wow! Guess I had trouble sending from my phone on this post!

[bearcove]

Blammer change of plans. I will pass on this for now.

Thanks, Rod

[Blammer]

no problem bearcove

[Dutch4122]

I'm in for a 5 cavity with one cavity hollowpointed. Thanks! :D

[castblaster]

I'm in for a 5 cavity all solid,
and a RG4.
i like the lyman 429421. just not from lyman

[Blammer]

Who wants what.

1. 376steyr 5C
2. 41mag fan 4C
3. timkelley RG4
4. captain Awesome RG2
5. dutch4122 5C + HP
6. landric 3C
7. Aaron RG4
8. castblaster 5C
9. castblaster RG4
10.

[gvanzeggelaar]

Put me in for an rg4

[shawnsmc]

Put me down for a 5 cavity.

Thanks,
Shawn

[nicholst55]

I'm in for an RG2.

[Blammer]

updated post #34

[ratboy]

i was doing some research on this mold. the thread i found from the first run of these molds had a couple of complaints about the size of the front driving band(not wide enuff). swede posted that he was having a new cutter made for this mold with a larger driving band
quote
(The top band got by me on this one.
If any of you don't want you mould
send it back and I will refund your money.

Having a new form tool cut with the right
band. But with the schedule like it is it will be hard to
rerun the whole buy.)quote

can you give me any details on this?
thank you sir

[Blammer]

What is your question?

[ratboy]

is the driving band on this rerun going to be wider than the original run of molds?

[SwedeNelson]

Yes, we will use the new tool to cut this buy.

Swede Nelson

[barefooter175]

What is an RG2 or RG4?

Just wondering....

James

[Blammer]

PM sent

[ratboy]

splendid. one more question. does the rg4 require a different set of pins to cast solid or can that be accomplished by flipping the existing pins over?

[Blammer]

the RG's come with two seperate sets of pins. One set for HP's another set for solids.

[ratboy]

deal. i want an RG4 please.

[Blammer]

Who wants what.

1. 376steyr 5C
2. 41mag fan 4C
3. timkelley RG4
4. captain Awesome RG2
5. dutch4122 5C + HP
6. landric 3C
7. Aaron RG4
8. castblaster 5C
9. castblaster RG4
10. gvanzeggelaar RG4
11.shawnsmc 5C
12. nicholst55 RG2
13. ratboy RG4
14. NVcurmudgeon 3C PAID

[Blammer]

list updated

[Blammer]

got your payment NVcurmudgeon.

You're all set!

[WDS]

I'll take a 4 cavity mold. What type of handles are needed?

[Blammer]

updated post #41

[Blammer]

lee 6C will work fine with them.

[Blammer]

paid list updated

[Blammer]

updated post #48

[Dutch4122]

Blammer-

Is it too late to cancel the hollowpoint option on my 5 cavity mold?

[Blammer]

nope.

[Dutch4122]

nope.

Thanks for taking care of the change.

[Blammer]

updated

[caw]

Please add me to the list for a 5 cavity, no HP.

Thanks

[nicholst55]

I need to change my order to a plain 4 cavity.

[Blammer]

updated post #59

[Blammer]

list updated

[Blammer]

updated

[John R]

Letter in the mail to you today with my order info

[Blammer]

John R, what do you want? post here so I know.

[John R]

My order is for one 4 cavity mold, one cavity HP, plus extra pins.
Thanks for running this, I needed a 429421 in 0.434in. due to large SW29 cylinder throats. My Lyman mold casts too small.

[Blammer]

updated

[LouisianaMan]

Hello,
Sign me up please for a 2-cavity mold, both hollowpoints. Thanks!

[AnthonyB]

I have a NIB RG2 with extra HP pins from the original run. $90 shipped; PM me if interested.
Tony

[AnthonyB]

That didn't take long; mold is sold.
Tony

[LouisianaMan]

Thanks, Tony.

Blammer, please withdraw me from this GB since I'm picking up an earlier NOE specimen from Tony.

BTW, Swede, the 360-200 LSWC is an absolute dandy, and now that I've figured out how to check all your GB's, I'm looking forward to the 452-230 RFHP, 358477 150g SWCHP, and the upcoming British 360-200 LRN. I see I just missed out on the 360160 SWC, so will keep my eyes open to see if you have an extra HP version in Dec-Jan, as it should make a beautiful "FBI load" equivalent for my Model 10. Looking over your list of GB molds reminds me of pre-Xmas poring over the old Sear's catalogue about 40 years ago. . . :-)

[Blammer]

updated post #62

[x101airborne]

I need one RG-4 pb. Please pm me with payment info so I can be locked in.

[Lefty SRH]

If the solid weighs 245gr what does the HP cast weigh?

[41 mag fan]

Darrell,
Can you switch mine to the RG4 with an extra set of pins?

Is this not going into production now till April?

[Blammer]

updated post #71

[captain awesome]

I apologize but I need to drop out of this one if possible.

[WDS]

As 42 mag Fan asked, what happened to cause production to go to April?

[Beau Cassidy]

Will this mold be available in HP or should I hold out on a 429244 Group Buy?

[Blammer]

beau, yes it will be avialable in HP's.

holiday production slow down, pushed everything back

[contender1]

Is it too late to get in on this group buy?

[Blammer]

not too late yet, post what you want! :D

[contender1]

Cool! You can add me to the list.

I'll do a 4 cavity mold with one cavity in HP, and (1) extra pin. That should take care of me!

[Blammer]

updated post #83

[Roughone]

I will take a 4 cavity. Plain, no extras.

[Blammer]

list updated.

[Gundawg]

I would like one RG-4, if it is not to late. Please PM me with payment info so I can be locked in ASAP.

Thank you!

[Blammer]

updated, gundawg all info should be on the first post on this thread.

[Blammer]

updated

[Gundawg]

Can you add the exta pins to my order. Thank you.

[Lucas]

2 cavity 429421 HP for me. $114 check is in the mail.

[Blammer]

updated post #83

[Blammer]

lucas the RG2 is $96 plus $10 for shipping is $106

is that what your wanting?

[Lucas]

Thanks for double checking, I have made many a mistake before. Extra set of pins should get us to $114.

[KevH]

Can I order an RG2 please?

I'll have a check for $106 inbound at the end of the week.

[Blammer]

updated post #92

[starreloader]

I will take 2 of the 5 Cav moulds

[Blammer]

updated.

[shtur]

What is RG2 and RG4 ?

[Blammer]

look here

http://castboolits.gunloads.com/showthread.php?t=139809

[GaryN]

What diameter are these going to be made in? Have any pictures? Square lube groove or round?

[Blammer]

read first POST please

[GaryN]

I have read the first post. It has no reference as to diameter. I did see where it said picture courtesy of NOE. Except I do not see any picture.

[shawnsmc]

Might need to check your browser becasue you should see three pictures. One of some finished bullets One of the SWC and one with the hollow points showing all measurements. Looks like a 434 Diameter with square lube groves.


I have read the first post. It has no reference as to diameter. I did see where it said picture courtesy of NOE. Except I do not see any picture.

[Butler Ford]

Gonna need 2 of them:

First: Single(1) cavity with hollowpoint and an extra pin.
Second: Three (3) cavity - I know it's not a listed option but if I don't ask, getting it is not going to happen, what is the possibility of getting one of these cavities cut with a gas check?

BF

[Blammer]

updated post #100

[Blammer]

unfortunately there is no GC option on this GB.

[PbHurler]

I'm in.
I'd like (1) RG2, (1) extra set of pins, (1) 4 Cavity Solid, and 14.00 shipping. I'm sending payment of 203 tomorrow.
Thanks for Honchoing

[Blammer]

you're on the list

[Butler Ford]

Well, I'm heart broken but I feared this may be the case. I ordered some Keith 240 just to make sure and at the length of the nose in the drawing, my browning will not cycle them. I am going to have to drop out of this buy. Sorry for the trouble but I really liked this bullet and it was timely and I jumped without checking the water.

BF

[Blammer]

no problem, no need to get a mould you can't use.

[SMCCORD]

Put me down for a 5 cavity.

[Blammer]

updated post #103

[Blammer]

updated

[gussiegoins2]

Please put me down for RG4.

[Blammer]

updated post #105

[slaird]

I’d like to order a 4-cavity mold.

Thanks,
Stephen

[Blammer]

updated post #111

[jeeedbb]

Blammer,

Not sure if this is still open. If so I would like

1 - RG4

PM sent.

Thanks,
jeeedbb

[Blammer]

Yep still open! you're on the list

[LET-CA]

I'd like a 2-cavity HP on both cavities. Is this brass or aluminum?

[Blammer]

it's aluminum, you're on the list

[Lucas]

Morning Blammer,

I have been disappointed with my Lyman 429421 casting at 0.429". Driving me nuts.

It is nice to see these NOE will be casting at 0.434". Will these NOE moulds fit Lyman handles?

Please add another mould for me.

2 cavity solid mould ($72 plus $10 for shipping and insurance). Check will be in the mail tomorrow. If I am over in payment, please put it in the Blammer fund as a thank you for organizing this buy. If I am under, please let me know.

[Blammer]

updated post #119

[LET-CA]

Can I change from an RG2 up to an RG4? - Thanks!

[Blammer]

yep, done

[Blammer]

updated

[Blammer]

updated today

[Bigscot]

Put me down for an RG-4.

Bigscot

[Blammer]

updated

[jethunter]

Put me down for an RG-4 with an extra set of pins. Shipping is to Canada, let me know payment instructions and total. Thanks
Terry

[Blammer]

updated post #123

[tudor8055]

Would like to get in for an RG2. Any time left?

[Blammer]

yep still time left until this thread gets moved to the closed waiting for delivery section.

[atom73]

I'll take a 2 cav HP on both with 2 pins and temp probe hole
Atom

[Blammer]

updated post #128

[hoagie214]

How about a Four Cavity...

Regards,

Hoagie

[Blammer]

updated

[Blammer]

updated

[Blammer]

updated

[Blammer]

updated post #132

[WDS]

Is there time left to change from a 4C to an RG2 + extra set of pins? If so please advise me the difference in cost so I can send a check.

[Blammer]

WDS, $19 more please. Include the note with or it may not get fixed. :)

[DocDorle]

I'm in for a 2 cavity mold @ $72 + $10 shipping and insurance. Check is on the way.

[Blammer]

updated post #136

[slaird]

I need to drop out of this group buy. I apologize for any inconvenience this may cause.

[Blammer]

no problem

[Loony44]

If not late, I would like a RG4. Thanks

[Blammer]

updated post #140

[ShootNSteel]

I'll take an RG4 and a 4 Cavity

[Jumping Frog]

I'm in for a RG4 + extra set pins. Check on the way.

[41 mag fan]

Blammer,
I'm going to have to drop out too. Sorry for any inconvienence

[Blammer]

Who wants what.

1. 376steyr 5C
2. jumping frog RG4+extra set of pins
3. timkelley RG4 PAID
4. contender1 4C +HP + extra pin
5. dutch4122 5C
6. landric 3C
7. Aaron RG4
8. castblaster 5C
9. castblaster RG4
10. gvanzeggelaar RG4
11.shawnsmc 5C
12. nicholst55 4CPAID
13. ratboy RG4 PAID
14. NVcurmudgeon 3C PAID
15. WDS RG2 +extra set of pinsPAID in full
16. caw 5CPAID
17. johnR 4C +HP + extra pin ;drill for probePAID + temperature unit ship from NOE's headquarters. :)
18. x101airborne RG4
19. roughone 4CPAID
20. gundawg RG4 + extra set of pins
21. lucas RG2 + extra set of pinsPAID
22. lucas 2CPAID
23. kevh RG2PAID
24. starreloader 5C
25. starreloader 5C
26. PBhurler RG2+extra set of pinsPAID
27. PBhurler 4C PAID
28. SMCCORD 5C
29. gussiegoins2 RG4PAID
30. loony44 RG4
31. jeeedbb RG4 PAID
32. LET CA RG4PAID
33. bigscot RG4
34. jethunter RG4+ extra set of pinsPAIDPP
35. tudor8055 RG2 PAID
36. atom73 RG2 ;drill for probe
37. hoagie214 4CPAIDPP
38. docdorle 2CPAID
39. shootnsteel RG4
40. shootnsteel 4C
41. shaky RG2

[Shaky]

If I havn't missed the boat, I'd like a RG2, please.

[Blammer]

updated post #144

[Blammer]

updated

[Blammer]

updated post #150

[Hans]

I would like in on this, make mine a 2c thanks

[Jumping Frog]

Any guidance on when NOE is actually going to have this order in their production schedule and when this group buy will close?

[Blammer]

updated

[Balduran]

429421 Keith

I would like this in a RG4 please
PM sent

[Blammer]

updated

[Blammer]

updated #154

[DocDorle]

Bammer,
I've moved since entering this group buy. PM sent.

[Blammer]

got it changed, thanks!

[Bjornb]

Hi,
would like a 4 cav. with 1 HP, 2 extra pins. PM sent.

[Blammer]

updated post #158

[hcr]

Put me down for a RG4, if there is still time. I will send payment within a few days. Thanks hcr

[Stick_man]

Man, you guys are killing me. I am going to have to get a part time job just to pay for all these moulds that I have to buy. Put me down for an RG2 please with local pickup at Swede's place. They are plain base, right?

[sergraf]

I'm in for a 3 cav. with one HP and extra pin. Payment will be on the way shortly.
(Not too late am I?)

Thanks

[Blammer]

updated post #166

[Mr Peabody]

I'm in for a 3 cavity PB.

[Blammer]

updated

[Blammer]

updated

[Blammer]

Updated

[calinb]

I love my 429421 2-cav mold from a previous run. A 5-cav is pretty tempting!

I finally machined my two blank pins to pentagon pins. I'd like to play with the pin design a bit. Can you tell me how to get four more pins, Darrell? Should I just ask SwedeNelson directly?

Thanks,

-Cal

[Blammer]

calinb, yes PM swedenelson directly and see what he can do for you.

[DocDorle]

Blammer,
Put me down for a RG-2 w/ an extra set of pins. $96 + $8 + $5 shipping (I'm already in for a two cavity solid).....a check for $109 will go out tomorrow.

[Blammer]

updated post #170

[jethunter]

Could i get mine drilled for the probe, please (#34 on the list)

[Blammer]

updated!

[IIJSavoy]

Please add me back to the list for:

RG4+extra pins.

Thanks!

[Blammer]

updated post #176

[Blammer]

updated

[AlabamaEd]

Is this buy closed or is there room for one more order?

[Blammer]

It's in the Active Buy Thread area. :)

so there is always room for more!

post what you want, I'll add you to the list.

[calinb]

I hope to get a couple more sets of blank HP pins to play with when SwedeNelson does this run.

I shot some gelatin through a heavy leather jacket and two layers of denim with an NOE 429421 cast bullet using the supplied conical pins and WW alloy. Velocity from my Taurus 44 Special was 911 fps. I can't find the photos right now but the nose of the bullet blew up and fragmented from the bottom of the HP well forward. The remaining wad cutter shaped slug traveled 18-1/2 inches through the gelatin.

This might actually provide decent terminal performance for hunting deer, but I'm interested in expansion instead of fragmentation. I've read elsewhere that WW Keith style HP bullets tend to blow up like this when cast in WW.

Here's my first attempt at an alternate HP. I suspect these will blow up too, because I kept the length, taper, and size of the pin about the same as the conical pin. The next thing I'll try will be reducing the depth of the HP cavity and perhaps decreasing the diameter slightly too. I guess if my gelatin testing reveals that this tapered pentagon HP bullet blows up, I'll just chuck the pins back up in my mini-rotary table and remove more pin material with my Harbor Freight mini-mill.

http://castboolits.gunloads.com/imagehosting/thum_104634fd13596dc420.jpg (http://castboolits.gunloads.com/vbimghost.php?do=displayimg&imgid=5519)

-Cal

[H.Callahan]

Can you pencil me in for an RG2, drill for probe?

[Blammer]

updated post #184

[AlabamaEd]

Please put me down for a four cavity. Payment will be sent in a day or so.

Thanks, blessings to all,

Paul

[Blammer]

updated.

[Blammer]

We are on the fast track to getting this mould made!

THIS IS A CALL FOR PAYMENT FOR THOSE WHO HAVE NOT PAID!

With NOE's new production schedule we have been bumped up due to the sheer number of people who want this mould!

Yea!

PM's arriving.

[SteveP]

Can you put me down for a 3 cavity PB with a probe hole? Check will be in the mail soon.

Thanks

[starreloader]

Check will go out in tomorrow's mail....

[Stick_man]

I certainly hope he makes a bunch of extra 4-cav molds. I will likely want one but don't dare commit for it at this time. Hopefully, I will have a better picture of my finances by the time this runs. Already down for a RG2 with local pickup. May want more production for this design.

[SMCCORD]

Payment going out this a.m.

Thanks.

[Blammer]

updated post #2

[shawnsmc]

Payment in the mail today.
Thanks,
Shawn

[SteveP]

Payment sent today.
Thanks,
Steve

[H.Callahan]

The proverbial check (ok, money order) is in the mail!

[AlabamaEd]

payment sent out in today's mail.

Thanks,

[376Steyr]

Check went into the mailbox yesterday. Thanks for running this!

[SwedeNelson]

Doing a update
Will try to keep all buys current on the schedule:
http://castboolits.gunloads.com/showthread.php?t=142415
If you have questions about our policy you can see it here:
http://castboolits.gunloads.com/showthread.php?t=156593

Bump

Swede Nelson

[Blammer]

updated

[Blammer]

paid list updated

[Blammer]

hmm, wonder if this can go in a 10C?

[Blammer]

updated

[Blammer]

ok no more additions, and if you havn't paid I need it.

[Landric]

Blammer,

Sorry for the delay, my payment went in the mail yesterday.

[Blammer]

got it landric

[DocDorle]

How close are we gettin' to production?

[H.Callahan]

I suspect that we are getting close. I was in on the group buy that was just ahead of the one listed as being just ahead of this buy. I got my mold a few weeks ago and I was one of the last shipped (it was an aluminum or brass option and the brass were done last). Unless they have been playing poker in the shop (just kidding, Swede), they should be done or close to done with the run ahead of us.

[H.Callahan]

Well, we are into mid-September now. Do we have any update of where we are with this one?

[Landric]

I suspect it is running, the .40/10mm RN that I honcho'ed was on the list just prior to this one, and it was completed last week.

[Blammer]

the HP pins are being finished now. :)

[AlabamaEd]

After two months on the new schedule our supplier now a month behind schedule?

[SwedeNelson]

AlabamaEd, others

It may not look like it but we are making head way.
Have second shop in the works to help out.
Another shop making mould blocks and sprue plates
And just about have my own mill on line and in production
This last month has been very challenging.

Hope to have this one done and shipped by the middle of next week.
Yes we are another month behind.

Swede Nelson

[SMCCORD]

No worries.

I can only speak for myself and I don't want to sound rude, but if I wanted it right now I would have taken my chances with an off the shelf commerical mold.
What few molds I have are a joy to use. They make great bullets that work flawless.

Growing pains are expected. Please don't sacrfice quality for speed. Keep up the good work.

Thanks,
Stacy

[AlabamaEd]

No worries.

I can only speak for myself and I don't want to sound rude, but if I wanted it right now I would have taken my chances with an off the shelf commerical mold.
What few molds I have are a joy to use. They make great bullets that work flawless.

Growing pains are expected. Please don't sacrfice quality for speed. Keep up the good work.

Thanks,
Stacy

Guess you and I might disagree on the definition of quality.

[shawnsmc]

I have over 30 of these NOE molds and every single one of them were well worth the wait. Maybe just get rid of the schedule and just send out payment request when a mold is a month out from being done? It's what the competition does! Just saying

Keep up the good work Swede,
Shawn

[AlabamaEd]

AlabamaEd, others

It may not look like it but we are making head way.
Have second shop in the works to help out.
Another shop making mould blocks and sprue plates
And just about have my own mill on line and in production
This last month has been very challenging.

Hope to have this one done and shipped by the middle of next week.
Yes we are another month behind.

Swede Nelson

Mr. Nelson,

Ya, i agree that "patience is a virtue". However, I'm apparently the only customer on this forum that thinks "quality" includes meeting production schedules.

Blessings,

[Blammer]

.....

[SwedeNelson]

Ed

I agree with you!
A moulds not much good if you cant get it.

That's why I have turned my complete operation upside down
to try and get a handle on deliveries.

I can guarantee you that I will never go through this again.
It would be easier / better to just close up shop.

Swede Nelson

[jethunter]

Ed

I agree with you!
A moulds not much good if you cant get it.

That's why I have turned my complete operation upside down
to try and get a handle on deliveries.

I can guarantee you that I will never go through this again.
It would be easier / better to just close up shop.

Swede Nelson

Al,
You might not realise it but most of us support you 100%. You make a top quality product at a ridiculously reasonable price and you don't have to apologize to anyone. The great majority of us hope you will be around here making GB moulds for many years to come.

[SMCCORD]

al,
you might not realise it but most of us support you 100%. You make a top quality product at a ridiculously reasonable price and you don't have to apologize to anyone. The great majority of us hope you will be around here making gb moulds for many years to come.



Amen.

[H.Callahan]

amen.

Amen squared!

[frankenfab]

.....


..........

[Blammer]

ok I'll see your 10 dots and raise you 5 dots

...............

[SwedeNelson]

Picked up moulds this afternoon.
Just got done casting with a RG2 mould
Dimensions on, weight with my WW material FN 256.4Gr. HP 239.6Gr.
http://i69.photobucket.com/albums/i80/swedenelson/429421245GrSWCF640x480_zpsdcb19fc0.jpg

Mold block temp 365F
Lead pot temp 687F

Finish QC and get them boxed up and out to Blammer as soon as I can.

Thanks
Swede Nelson

[PbHurler]

Those look almost too purdy to shoot Swede, I'm looking forward to another great mold!

[Landric]

ok I'll see your 10 dots and raise you 5 dots

...............

I fold, too rich for my blood...:p

[Griz44mag]

Blammer,
If there are any of these left (or someone doesn't want one) I would like to have it. Cavity count does not matter.

Thanks!

[Blammer]

griz44mag, check NOE's website any extras he'll have posted there soon enough and you can buy what you want.

Time for me to start folding some boxes. :)

[SwedeNelson]

Blammer

Got them in the mail this morning.
Its all yours good friend

Swede Nelson

[Blammer]

I have received them. Let the work begin...

[Jumping Frog]

Good news!

Guess that means we'll all get our moulds tomorrow via FEDEX, right? :kidding: :lol:

[Blammer]

only for those who have 'greased the wheels' appropriately. :)

[Blammer]

updated shipping

[Blammer]

Shipped 10/6/12

updated

[Mr Peabody]

Blammer;
Got mine today, THANKS!

[Dutch4122]

Mine arrived today as well. Looks great!

[DocDorle]

I got mine yesterday even though you haven't shipped them yet. Must be some quantum mechanics going on.:mrgreen:

[Blammer]

It's that new transporter beam I'm testing out....

[hcr]

Got mine today, looks great. Now I need a rain to have time to use it. Thanks Blammer and thanks NOE. hcr

[Hans]

Got my mould, looks great. need to find time to give it a whirl. Thanks!! Hans

[Blammer]

shipping updated, pm's sent for clarification on mailing addresses.

[H.Callahan]

My mold appeared in the mail this morning. Visually checked it over and it looks like another of NOE's disgustingly boring high quality molds (absolutely none of the drama that you get with Lee's!). Can't wait to break this in and start casting with it.

Thanks, Blammer!

[Blammer]

You're welcome.

http://castboolits.gunloads.com/showthread.php?t=154778

[SMCCORD]

My mold was waiting on me when I got home. The wife and daughter are out of town and it's been raining all day. I think someone is trying to tell me to make some boolits. I think I'll listen.

A very BIG thanks to everyone involved.

[PbHurler]

My molds arrived yesterday Blammer, Thank you for honchoing another fine NOE buy.

[Bigscot]

Got mine on Friday. Getting ready to try it out. Thanks for all the hard work.

Bigscot

[Blammer]

anybody know how to get in touch with CAW? I need his zipcode so I can send him his mould! I pm'd him and no reply, I don't have his email addy or I would.

any help is appreciated.