Help Please LEM

[LAH]

I looked at a few moulds today included in a package deal. Looked to be maybe 4 single cavity Lyman's in orginal boxes with the proper small handles. Also in the group was one T/C and one Lee mould. Most these moulds were in good shape with the handles being great.

In this box were three round ball moulds with handles. The blocks appear to be brass and in new condition. These were also in what looked to be orginal boxes marked LEM. What or which company is this?

Thanks,
Creeker

[IcerUSA]

Did a quick search and it seems that they where out of the UK back in the 70's ,out of bussiness now, found a little bit of info on a .177 forum about them, made pellet and round ball moulds. Hope this helps a little.

[LAH]

Thanks to everyone for your time. Here's what I came up with:

http://www.jt-bullet-moulds.co.uk/

[IcerUSA]

Seen that place in my search, just didn't see much about LEM on it :)

Keith

[LAH]

Here's the new email address and the answer to my question.....LAH

From: Jeff Tanner <jeff@jt-bullet-moulds.co.uk>
>Date: 2007/01/08 Mon AM 05:09:02 CST
>To: creeker 44 @ verizon.net
>Subject: RE: Some help please

>Hi Creeker, LEM moulds were made by a chap called Maguire somewhere in the
>Midlands of England. They were good on size but did not have enough brass
>around the cavity so tended to overheat quite quickly. They were priced at
>about £12.00 to £15.00 pounds UK. $24 to $30.00 in your money. If you need
>any odd size moulds I can supply them in virtually any size to fit regular
>handles.
>
>Regards Jeff
>
>mailto:jeff@jt-bullet-moulds.co.uk
>
>www.jt-bullet-moulds.co.uk