NOE .40 S&W/10mm 160/180 Round Nose Group Buy

[Landric]

***THIS BUY IS NOW CLOSED. THANKS FOLKS!***

This buy will be for the NOE 160 / 180 Grain .40 S&W/10mm Round Nose. This buy is on the schedule for April 2012.

NOE is willing to offer a choice between 160 and 180 grain boolits on this buy. Only one weight per block, so no mixed 160/180 cavities, but there will be a choice of 160 or 180 grain boolits for each mould. There will also be a bevel base option for the 180 grain boolit, but it will weigh about 190 grains with the BB, still 180 grains as the PB. RG moulds will only be available with the 160 grain weight.

Here are the pics of the design:

190 Grain Bevel Base

http://i25.photobucket.com/albums/c85/Landric/1111-162_402_190Gr_RN_BB_REV1.jpg

180 Grain Plain Base

http://i25.photobucket.com/albums/c85/Landric/1111-162_402_180Gr_RN_REV1.jpg

160 Grain Plain Base

http://i25.photobucket.com/albums/c85/Landric/1111-162_402_160Gr_RN_REV1.jpg


160(150) Grain Plain Base HP

http://i25.photobucket.com/albums/c85/Landric/1111-162_402_150Gr_RN_HP_REV1.jpg

Loaded .40 S&W Cartridge

http://i25.photobucket.com/albums/c85/Landric/1111-162_40_SW_CART_REV1.jpg


Loaded 10mm Cartridge

http://i25.photobucket.com/albums/c85/Landric/1111-162_10mm_CART_REV1.jpg


The hollow point version of the 180 grain would be the same as the 160 grain, just slightly longer, and probably around 170 grains. When posting, please let me know which weight you want. We can mix and match weights to get the required 15 orders, we just can't mix and match weights in moulds.

PLEASE NOTE, NOE HAS DETERMINED THAT THE RG MOULDS WILL ONLY BE AVAILABLE IN THE 160/150 WEIGHT DUE TO THE DIFFERENCE IN PINS REQUIRED FOR THE HEAVIER WEIGHT BOOLIT IN RG FORMAT. THE 180 GRAIN BOOLIT WILL ONLY BE AVAILABLE IN STANDARD FORMAT, BUT THOSE MOULDS MAY BE HOLLOWPOINTED FOR THE EXTRA $35/CAVITY COST. SORRY FOR THE CONFUSION. ANYONE WHO IS LISTED FOR A RG MOULD IN THE 180 WEIGHT, PLEASE LET ME KNOW WHAT YOU WOULD LIKE TO DO, SINCE THE RG ISN'T AVAILABLE IN THAT WEIGHT. THANKS.

List of those interested:

SHIPPING COMPLETED, THANKS EVERYONE!

*1)Landric 3 Cavity 3PB 160 Grain In my hot little hands
*2)btreanor 5 Cavity 5PB 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 7444
*3)starreloader 5 Cavity 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 6973
*4)starreloader 5 Cavity 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 6973
*5)Paulinski 3 Cavity 3PB 180 Grain Shipped, Canada, no delivery confirmation number available
*6)sargenv 4 Cavity 4PB 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 7468
*7)Lloyd Smale RG4 4PB 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 6805
*8)coaldust 4 Cavity 4PB 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 7437
*9)Jeff_WNY 4 Cavity 4PB 180 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 6768
*10)shawnsmc RG4 4PB 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 6775
*11)Groo 2 Cavity 2PB 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 6799
*12)Lizard333 3 Cavity 3PB w/ HP 180 Grain USPS Delivery Confirmation # 0310 0480 0002 7560 6583
*13)mold maker RG4 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 7147
*14)allie 5 Cavity 5PB 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 6812
*15)Beau Cassidy RG4 4PB 160 Grain USPS Delivery Confirmation # 0310 0480 0002 7560 8846
*16)1dbbehr 3 Cavity 3PB w/ HP 180 Grain USPS Delivery Confirmation # 0311 3260 0001 3895 0271
*17)sandermar 4 Cavity 4PB 180 Grain Shipped, Canada, no delivery confirmation number available
*18)SMCCORD 5 Cavity 5PB 160 Grain USPS Delivery Confirmation # 0310 0480 0002 7560 8952
*19)Idaho Sharpshooter RG4 4PB 160 Grain USPS Delivery Confirmation # 0310 0480 0002 7560 8969
*20)h1tdk00 RG4 4PB 160 Grain -1 SET BLANK PINS USPS Delivery Confirmation # 0310 0480 0002 7560 8976
*21)Iron Mike Golf RG4 4PB 160 Grain USPS Delivery Confirmation # 0310 0480 0002 7560 8860
*22)boltons75 RG4 4PB 160 Grain USPS Delivery Confirmation # 0310 0480 0002 7560 8877
*23)citizenal 5 Cavity 5PB 160 Grain -DRILL FOR PROBE USPS Delivery Confirmation # 0310 0480 0002 7560 8884
*24)citizenal 5 Cavity 5PB 180 Grain -DRILL FOR PROBE USPS Delivery Confirmation # 0310 0480 0002 7560 8884
*25)Redwoode RG4 4PB 160 Grain -DRILL FOR PROBE USPS Delivery Confirmation # 0310 0480 0002 7560 8891
*26)Blov 5 Cavity 5PB 160 Grain USPS Delivery Confirmation # 0310 0480 0002 7560 8907
*27)Kobuk 4 Cavity 4PB 180 Grain USPS Delivery Confirmation # 0310 0480 0002 7560 8914
*28)soaringf22 5 Cavity 5PB 180 Grain USPS Delivery Confirmation # 0310 0480 0002 7560 8921
*29)tcart RG2 2PB 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 7383
*30)joeatact RG2 2PB 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 7390
*31)alamogunr 4 Cavity 4PB 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 7406
*32)1845greyhounds 4 Cavity 4PB 160 Grain -DRILL FOR PROBE USPS Delivery Confirmation # 0311 0240 0002 4257 7413
*33)ShootNSteel 5 Cavity 5PB 180 Grain, 1 Cavity HP'd USPS Delivery Confirmation # 0311 0240 0002 4257 7420
*34)HighHook RG4 4PB 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 7369
*35)Cmemiss RG4 4PB 160 Grain USPS Delivery Confirmation # 0311 0240 0002 4257 7451


*= PAID ORDER

Standard Molds
Single cavity mould $68.00 Ea.
Double cavity mould $72.00 Ea.
Three cavity mould $79.00 Ea.
Four cavity mould $85.00 Ea.
Five cavity mould $92.00 Ea.
Hollow pointing one cavity and furnishing a double ended pin would be $35.00 extra.
If you want to fashion different HP profiles, an extra blank pin would be $1.50

RG Aluminum Molds
Two cavity RG2 HP mould $96.00 Ea.
Includes one set of hollow point pins
and one set of flat nose pins.
If you want to fashion different HP profiles for the RG2 an extra blank pin set of two (2) would be $4.

Four cavity RG4 HP mould $126.00 Ea.
Includes one set of hollow point pins
and one set of flat nose pins.
If you want to fashion different HP profiles for the RG4 an extra blank pin set of four (4) would be $8.

Shipping and handling will be $10 per order (1 or 2 moulds) and shipped priority mail. If you live outside the United States contact me, and I will work with you, US Priority Mail International will be about $20 US. There will be a $4.50 charge (per mould) for payment via PayPal to cover PayPal fees.

[Jeff_WNY]

Please put me down for:

1 Four cavity mould Standard 180 Grain PB. Thanks.

[shawnsmc]

You can put me down for a RG4.
Thanks,
Shawn

[Landric]

You can put me down for a RG4.
Thanks,
Shawn

Will do, which weight would you like?

[shawnsmc]

Will do, which weight would you like?

Sorry I assumed the RG's were only 150's. I guess I will go with the 150 grain.

Thanks

[shaggyant]

put me down for a five cavity round nose 180gn mold please.
P.S. is there a gas checked version of this available?

[Landric]

No, no gas check on this one.

[shaggyant]

Ok, I have been looking at the drawing and I need to get this to load at 1.260" OAL in my 10mm. Since my brass is .991" long it looks like I will be into the ogive of the bullet by about ten thousandths.
I am not sure if this will pose a problem?Is there something I am overlooking on this?

[shawnsmc]

Ok, I have been looking at the drawing and I need to get this to load at 1.260" OAL in my 10mm. Since my brass is .991" long it looks like I will be into the ogive of the bullet by about ten thousandths.
I am not sure if this will pose a problem?Is there something I am overlooking on this?

Use the RG version. The hollow point should put you right where you want.

[shaggyant]

Use the RG version. The hollow point should put you right where you want.

It's ok, I want the extra bullet weight. I'll stay with the round nose and just seat them as close to SAAMI spec as I can get. There ought to be room in my Glock and 1911 mags for the difference in length.

[sargenv]

Seems we are getting close to the minimum order.. cool.. If I didn't already have a 185 ish RN I'd go for the heavier weight also.. I didn't even realize that it had gone into Group buy mode..

[Landric]

We just need one more to get on the production schedule. Hopefully someone will speak up soon.

[Landric]

We are at 15, so I'll contact NOE and see about getting us on the schedule. Bump for interest.

[Groo]

Ok, I have been looking at the drawing and I need to get this to load at 1.260" OAL in my 10mm. Since my brass is .991" long it looks like I will be into the ogive of the bullet by about ten thousandths.
I am not sure if this will pose a problem?Is there something I am overlooking on this?
Groo here
Looks like the nose will need to be shortened to work in a 10mm..
Lets get this checked before production or this will be a 40S&W only bullet..
I want it for 10 mm...
Max case length .992 in Speer Trim to .982 Max cart length 1.260 [many load 1.250]
PS. Double stack mags [like glock] can take longer shells but the 1911 is shorter in the mag,
a 38 super is max at 1.28 with a smaller round nose.

[thegreatdane]

I also plan to use this for 10mm (and .40). Glad you caught that one shaggy. I'd prefer not to be seated below the ogive.

Keep us posted.

[Lizard333]

Three cavity PB 180 gn

[sargenv]

Wife just got a permanent job, so with that, I'm going to add in a 4 cav PB 180 also.. Never can have too many molds ;)

[Mauser Rat]

We're on the NOE schedule for January if any of you had not already checked! Thanks Landric and Al!

:drinks:

[harley45]

So did we decide if this will work in a 10mm?

[Mauser Rat]

Landric,

I'd like to ADD a 3 cav 3 PB 180 grain RN to the 3 cav 3 PB 160

Both drilled for probe please

Thanks,

Kevin

[sargenv]

Wondering why it wouldn't work in a 10 mm if it works in a 40 S&W?

[SwedeNelson]

Did a complete review of the design.

The nose is long to work as intended.
I used the wrong OAL in my calculations.

Have forwarded new drawings to Landric
that should work great.

shaggyant
Thanks for the catch.
It pays to have more than one set of eye's on a project.

Swede Nelson

[harley45]

I see there is a ? mark as to what I want so I believe I will change mine t the 190 grain bevel base 2 cavity mold NO HP on this one

[mold maker]

OK since the 10mm question is solved, I'll need an RG4, 160gr.

[hicard]

I have a couple of ??'s after my name and I don't know what is missing. RG2 PB 180 GR bullets and drilled for temp probe. What did I leave out? #17 on the list.

[Landric]

I have a couple of ??'s after my name and I don't know what is missing. RG2 PB 180 GR bullets and drilled for temp probe. What did I leave out? #17 on the list.

Sorry, I updated the original post with additional mould information. The RG moulds are only going to be available with the 160 grain boolit. Would you like to change to 160 grain RG, standard mould, or make some other change?

[Aaron]

Add me for a RG4 160 all pins please.

Thanks

Aaron

[thegreatdane]

Awesome. I'm excited for this one. 180 Grain Plain Base, 4cav please! Yay!

[Mauser Rat]

Yes sir-ree Bob, boy howdy!

Lookin' forward to this one by golly!

*buuuuummmmmmmppppppp*

[hicard]

Please drop me from this buy. Already have a lightweight hp mould.

[Landric]

Bump for interest...

[harley45]

So if I'm reading this right I can still get the 2 cavity 190 grain I originally asked for right?

[Landric]

Yes, that is correct.

[allie]

Count me in. I would like a 5 Cavity 160 Grain PB.

Allie

[plainsman456]

Put me down for a 2 cav 180 grain pb and a 2 cav 160 grain pb please.
Thanks

[Beau Cassidy]

I am good for a 5 cavity 160 Grainer plain base. This mold should pay for itself in spades.

[2003viper]

i will take a 5 cav 190 gr bb

[sandermar]

Interested in 180 gr RN PB 4 cavity mold. How do I work out payment if I live outside the US?

M.

[Landric]

Payment via PayPal would be the best option if you are outside the US.

[1dbbehr]

Landric,

Cant wait anymore, Put me down for 1- 3Cavity 3PB, 2-RN, 1HP 180 Grain mold

1DBBEHR at COX dot NET

1DBBEHR

[sandermar]

Interested in 180 gr RN PB 4 cavity mold. How do I work out payment if I live outside the US?

M.


Payment via PayPal would be the best option if you are outside the US.

You can count me in.

Thnx.

M.

[Lizard333]

Is it too late to add a HP to one of my cavities??

[2003viper]

can i change mine to a 160 gr?

[harley45]

I want to change mine to, I want the 4 cavity 180 grain plain base.

[Landric]

Changes made.

[sargenv]

I just checked the schedule.. so it looks like March 2012 now.. so delivery will likely be around April likely? When should I expect final call for payment?

[Landric]

Final call in february sometime I expect.

[thegreatdane]

Can't wait!

[sargenv]

Hmm.. I wonder if I'll have them in enough time before the 2012 IRC... to get a few thousand made up and ready to test against my 185's..

[Ronbo256]

Please add me to the list, I would like a 5 cavity 160gr PB mold.

[bigboredad]

Please put me down for a 4 cavity pb 160gr

[Idaho Sharpshooter]

I would like to be placed on the list for an RG4 if you would, please.

Rich

[Landric]

List updated...

[dugout]

Went a different direction...

THANKS!

[Iron Mike Golf]

I'd like to join in for a 180 gr RG4 PB.

Thanks!

[Landric]

Iron Mike Golf, the RG moulds are only available in the 160 grain weight. Do you want a 160 grain RG4, so something else? Thanks.

[Echo]

Please put me down for a 4-cav pb 180.

[huntnman]

I would like a 160gr rg4 plane base hp. please

[huntnman]

Please remove me from this buy.Went a different way.

[h1tdk00]

If it is not too late, I would like to get an RG-4 160gr. mold.

[shawnsmc]

Can I also get a 5 cavity 180gr.
Thanks Shawn

[coaldust]

I'd like to have a 160gr round nose plain base 4 cav.
Ronald Woodruff 75496

[Beau Cassidy]

Change mine to the 160 RG4 and let me know how much more I owe. Thanks.

[coaldust]

Already posted "I want one" but don't see my name on the list.
Would like a 4 cavity 160gr plain base round nose. Thanks, Ronald Woodruff

[Landric]

List Updated.

Beau, its an additional $34.00.

Thanks!

[harley45]

Sorry but I needed something sooner so I bought a Lee Please remove me from the list.

[Iron Mike Golf]

Iron Mike Golf, the RG moulds are only available in the 160 grain weight. Do you want a 160 grain RG4, so something else? Thanks.

OK, sorry for the delay. 160/150 PB RG4, if it's not too late.

[thegreatdane]

Landric, please change mine from a 180 to a 160, and 4 cav to 5 cav:
5 Cavity 4PB 160

Thank you, kind sir.

[btreanor]

I would like a 5-cavity, 160 grain plain base.

Thanks,

Bill Treanor, Zip: 37209

[Lizard333]

How's it looking? We still scheduled to start this month?? If they start this month when will we get the molds?? No rush, just curious. This is my first group buy.

[Landric]

How's it looking? We still scheduled to start this month?? If they start this month when will we get the molds?? No rush, just curious. This is my first group buy.

I will see if I can find the current schedule, but I think we got pushed back a month or two.

List updated.

[harley45]

I know I said I didn't but I got a pretty good tax return so can I get a 2 cavity 180 grain plain base?
PM me the payment address.

[boltons75]

I would like to get in on this if it's not too late, I would like a 5 cavity 160 gr pb. Could you PM me the payment details, and when it's due..

Sent from my rooted, mikg'd, aggressive freedom'd Evo 4g.

[citizenal]

i'll take a 5 cavity 160 grain rn and a 5 cavity 180 gn both drilled for probes.

[Redwoode]

May I get under the wire at this late date for:

1ea. 4 Cavity 4PB 160 Gr.

Thanks, Arnell

[Blov]

I'd like to get under the wire also.

5 cavity 5pb 160 gr.

[Redwoode]

Bump... May I get on the list please? See post above.

[Landric]

List updated, sorry for the delay folks...

This buy will close March 15th, 2012. Payment info will be going out soon. Again, sorry for the delay on this, things have been crazy for me again.

[Kobuk]

I will Take one, Make mine a...

4 cavity 180gr Plain Base

Brad

[soaringf22]

I'll take one. a 5 cavity 180gr pb

Steve

[harley45]

Can I still change from a 2 cavity to a 4 cavity?
If so thanks!

[tcart]

Put me down for a RG4 4PB 160 Grain
tcart at hotmail dot com

[boltons75]

I would like to get in on this if it's not too late, I would like a 5 cavity 160 gr pb. Could you PM me the payment details, and when it's due..

Sent from my rooted, mikg'd, aggressive freedom'd Evo 4g.

Would you please change mine to the RG4 160 gr. 4 cav mold. Thanks.

Always carry, never tell.

[sandermar]

Payment via PayPal would be the best option if you are outside the US.

When will you be looking for payment? Shall I PM you now to set up payment via Paypal as I am outsid the US?

[sargenv]

Please remove my request for the 180 - 4 cav. I will stick with my original 160 gr 4 cav mold. Sorry bout that.. money has suddenly dried up so I can only afford the one mold. :(

[Redwoode]

Please add a 4 cavity pb 180 to my current 160 on the list. Both drilled for probes.

Thank - you

[joeatact]

Can I get a Two cavity RG2 HP mould $96.00 Ea

Joe
joe@joespens.com

[alamogunr]

Add me to the list for a 4 Cavity 4PB 160 Grain.

[boltons75]

Would you please change mine to the RG4 160 gr. 4 cav mold. Thanks.

Always carry, never tell.

Just wanting to bump to make sure mine gets switched to a RG4 mold.

Always carry, never tell.

[Landric]

List updated, I'll get payment message as soon as the buy closes. Thanks folks.

[1845greyhounds]

I would like a standard 4 cavity 160 grain PB mold drilled for a probe.

This is my first group buy, so I am a unclear on when to make payment. Please clarify.

[boltons75]

When is the payment info going to be sent out?

Always carry, never tell.

[Redwoode]

Haven't seen close notice notification. Sooo, I'd like to switch my line 38) on the list

from: 4 cavity 4PB 160 Gr drill for probe

to: RG4 4PB 160 Gr drill for probe

Thanks much!

[Lloyd Smale]

put me down for a plain base 160hp rg4 if its not to late.

[starreloader]

Landric, when does this buy close and go on schedule for the mill??

[Redwoode]

Landric, as you close please see PM regarding this buy sent on 3/23.

Thanks

[Landric]

Sorry folks, been busy, will be updating the list and sending payment info tonight.

ETA: Payment info has been sent to everyone via PM. Echo, you mailbox is full, please contact me for payment info.

Thanks again folks, sorry for the delay.

[boltons75]

No problem about the delay, payment sent. Now the waiting game commences. Can't wait to cast a few hundred with this mold.

[Lizard333]

No problem about the delay, payment sent. Now the waiting game commences. Can't wait to cast a few hundred with this mold.

You think waiting starting now sucks, I got into this buy in July..........it's killing me.....

[boltons75]

You think waiting starting now sucks, I got into this buy in July..........it's killing me.....

Well, I at least have 3 other 40 molds to cast with until this arrives, and my purdy new mihec brass 380 4 banger. Those will feed the casting urge for awhile I hope.

[mold maker]

payment sent by PP.

[tcart]

Payment sent by MO

[harley45]

Payment sent!

[coaldust]

Payment sent via Paypal. Thanks for Honchoing this GB

[Paulinski]

Payment sent....

[sargenv]

Payment sent by online bill pay, check should be on the way.. Thanks for heading up the group buy!

[Blov]

Payment sent via paypal. Thanks!

[Redwoode]

Paypal sent

[allie]

Payment sent Paypal.

Thank you,

allie

[1845greyhounds]

Payment sent via PayPal.

[Kobuk]

Payment sent via PayPal

[soaringf22]

Sent Via PP

[Landric]

List is updated with all the paypal payments I have gotten. I still have some mailed in payments to update, so if you mailed your payment and are not showing paid, don't worry.

[Landric]

List is now updated with everyone I have a payment from.

[boltons75]

The first post shows this on schedule for this month, but I saw it on the schedule for June in another post. Has this been pushed back to June?

[Landric]

The first post shows this on schedule for this month, but I saw it on the schedule for June in another post. Has this been pushed back to June?

It would seem so. When I was updating the list yesterday I noticed that it had been bumped back. It was still scheduled for April when I closed the buy.

[Jeff_WNY]

PayPal sent - THANKS!

[sargenv]

I guess it's good that I'm shooting Classic with a 686 for the IRC this year.. I was going to try those 160's in lieu of the 185's I currently use in the 40.. maybe next year :)

[SwedeNelson]

Landric, others

The schedule has slipped back 4 to 5 weeks.
Have about 9 or 10 buys to run before this one.

This has turned in to one big monster.
Will keep feeding it as fast as I can.

Doing our best to keep moving forward.
Swede Nelson

[mold maker]

Landric, others

The schedule has slipped back 4 to 5 weeks.
Have about 9 or 10 buys to run before this one.

This has turned in to one big monster.
Will keep feeding it as fast as I can.

Doing our best to keep moving forward.
Swede Nelson

Success can really bring on it's own problems, can't it?[smilie=w:

[Cmemiss]

Landric

If not too late could I get in for a 4 cavity RG 150/160. If so PM me the payment info. Thanks

[1dbbehr]

Landric,
Payment Sent Via PP.

Thx
1dbbehr

[Lizard333]

Anyone have an idea on the top punch needed for this mold? I guess I'll need two as I have an HP mold as well. I have a Lyman 4500.

[boltons75]

Anyone have an idea on the top punch needed for this mold? I guess I'll need two as I have an HP mold as well. I have a Lyman 4500.

You will get the appropriate top punch with the mold.

Always carry, never tell.

[Landric]

List updated again, all the payments I have are marked paid. Thanks!

[SMCCORD]

Just aquired a S&W M&P Pro and alot of 40 cal brass in a trade this morning. If there is an extra 5 cavity PB 160 grain mold PLEASE let me know. In the mean time I'll watch for extras in the vendor section. Thanks .

[plainsman456]

My payment was sent to NOE.
I sent Al a pm.

[sandermar]

Payment sent via PayPal.

[HighHook]

Add me to the list for a RG4 160 pb

[Jeff_WNY]

Just wondering what the time frame looks like. Thanks.

[boltons75]

Looking at the schedule there are 5 other molds in front of this one. It says it's slotted for June.

Always carry, never tell.

[Landric]

List is again updated with all the payments I have. If you haven't sent payment, please do so now. If you need payment info, please PM me. Thanks!

[HighHook]

Payment Sent via paypal... Thanks

[boltons75]

Looking like were pushed back to august now, if not later due to the new noe scheduling policy.

Sent from my PC36100 using Tapatalk 2

[harley45]

Refund request sent, please respond!

[Oreo]

Can I get in on this one or is it too late?

Please add me to the list for an RG4. I'll send payment in the morning.

[boltons75]

Hey if we can get enough in on this it can be bumped up the production list.

Sent from my PC36100 using Tapatalk 2

[SwedeNelson]

Harley45
Will confirm with Landric and get you a refund.

Oreo
The buy is closed and blocks are ordered
You can buy one off the website when the buy has been run

boltons75
Again the buy is closed and blocks ordered.

Swede Nelson

[SwedeNelson]

Doing a update
Will try to keep all buys current on the schedule:
http://castboolits.gunloads.com/showthread.php?t=142415
If you have questions about our policy you can see it here:
http://castboolits.gunloads.com/showthread.php?t=156593

Bump

Swede Nelson

[Landric]

Payment for all the moulds is going in the mail this week to NOE. I know it has been a long road, but we are almost there. Thanks to everyone for the patience. We should be in production by August.

[Idaho Sharpshooter]

Good! Good!

I just got back from Alaska fishing for a week. Went from 56-degrees there to 104-degrees here in SW Idaho in 24 hours.

Thanks Landric and Swede for getting this done.

Rich

[Landric]

Just an update:

Payment for the buy arrived at NOE yesterday. It is next on the mill, possibly as soon as next week.

Thanks to everyone!

[boltons75]

Cool, been looking forward to trying these out.

Sent from my PC36100 using Tapatalk 2

[beladran]

is there any room left on this bus?

[sargenv]

Was hoping these would be available for the IRC this year, happy that I will likely have them for next year's IRC :)

[abqcaster]

Was hoping these would be available for the IRC this year, happy that I will likely have them for next year's IRC :)

Same here, Beladran. . . . :groner:

[Lefty SRH]

Damn, just now saw this one.

[Landric]

NOE will likely have extras for sale after the run is done.

[abqcaster]

where would I find loading data for the 160 grain boolit? I'm looking in two manuals and online, and I only see 150gr data.

[boltons75]

Any word on the status of these? Are they being run on the mill now?

Sent from my PC36100 using Tapatalk 2

[Landric]

where would I find loading data for the 160 grain boolit? I'm looking in two manuals and online, and I only see 150gr data.

Extrapolation from available data is probably the best answer. So long as one is careful, and understands what one is doing, it works pretty well.

There are also programs available for folks who are into that sort of newfangled stuff. :bigsmyl2:


Any word on the status of these? Are they being run on the mill now?

I have no new gnus at the moment, I'll see what I can find out.

[SwedeNelson]

Landric, others

This one is to go on the mill as soon as the 311 247Gr. is worked through.
This has slowed it down and set it back but it is ready to go.

Its coming!
Swede Nelson

[sargenv]

I'd use Data for the 165.. in fact, depending on your alloy, your 160 might come out to 165 anyway. If you can't find data on the 165, then use either 170 or 180.

[Lefty SRH]

Swede, will you let me know if you have any extra molds left over after this run please.

I'm interested in the 160gr RN PB and/or the 180gr RN PB....

[Iron Mike Golf]

So, is this going to be finished in August?

[SwedeNelson]

Iron Mike Golf, others

Proofed the form tool and it is on the mill
http://i69.photobucket.com/albums/i80/swedenelson/402180GrRN001-F640x480.jpg

We do hope to have them done yet this month.
Swede Nelson

[boltons75]

Those look very nice, can't wait to give them a try in my sr40c...

Sent from my PC36100 using Tapatalk 2

[sargenv]

I can't wait to try them in my 610 and maybe my Para P16..

[Iron Mike Golf]

Great news. Thanks, Swede!

[SwedeNelson]

Picked up moulds today
Cast with a RG2
Dimensions right on weight with my ww material 148.2GR. (HP)
http://i69.photobucket.com/albums/i80/swedenelson/40Cal180GrRN001-F640x480.jpg

Lead pot temp 697F
Mould block temp 345F

Will work on QC and boxing them up over the week end.
Will get them out to Landric ASAP
Thanks to all that ordered.
Swede Nelson

[Oreo]

Any extras for someone like me (not on the list) to purchase?

I'd like one if one is available.

[boltons75]

Picked up moulds today
Cast with a RG2
Dimensions right on weight with my ww material 148.2GR. (HP)
http://i69.photobucket.com/albums/i80/swedenelson/40Cal180GrRN001-F640x480.jpg

Lead pot temp 697F
Mould block temp 345F

Will work on QC and boxing them up over the week end.
Will get them out to Landric ASAP
Thanks to all that ordered.
Swede Nelson

Ooh, those look pertty...... Can't wait

Sent from my PC36100 using Tapatalk 2

[Lefty SRH]

I'd like this mold also, but I didn't make the list.

[plainsman456]

My molds came in today.
They look like a piece of art,to pretty to use.....For now.

Good job guys.

[Landric]

I got boxes of moulds in the mail today also. I'll be getting them boxed up and will have them shipped out by the end of the week, God willing and the creek don't rise.

[boltons75]

I'd like this mold also, but I didn't make the list.

Goto their, noe molds, website, they have the extra listed for sale.

Sent from my PC36100 using Tapatalk 2

[Lefty SRH]

Goto their, noe molds, website, they have the extra listed for sale.

Sent from my PC36100 using Tapatalk 2

Its on order and should arrive this week.

[boltons75]

I order a 180 gr version of the noe site and got it today, it looks great. Can't wait to get my 160/150 gr version....

Sent from my PC36100 using Tapatalk 2

[Landric]

I have shipped the huge majority of the moulds, delivery confirmation numbers are listed on the first page. Sargenv, I sent you a PM, for some reason I don't have your address.

The rest of the moulds should ship tomorrow, I ran out of supplies and had to get more from the post office, there is no way I will make it back there today with the remaining moulds.

[sargenv]

And I replied to you. :)

No hurry.

[boltons75]

Cool, just cast a couple hundred of the 180's testing that mold out. Can't wait to unwrap and get this one casting.

Sent from my PC36100 using Tapatalk 2

[Landric]

Shipping is complete, thanks to everyone!

Now, lets see some results!

[tcart]

Received my mold today looks awesome. This is my first NOE mold.
Thanks Landric for honchoing this deal.

[mold maker]

In my trembling hands right now.
Another work of art for my casting bench, and then my Colt Delta Elite.

[boltons75]

Loaded up 50 of the 180's, with 6-6.6 grains of wsf. They all shot great and grouped nicely.

Sent from my PC36100 using Tapatalk 2

[sargenv]

I received mine weeks ago, but just have not been able to get anything cast lately.. hopefully when the weather cools down a bit, I'll have some time (or will make some time) to crank out a few of these.. the molds look great :)

[abqcaster]

I wasn't on this group buy, but benefited from the extras. It took me 15 minutes to start casting perfect bullets after I realized the mold liked being hotter than what I'd thought. They cast and loaded perfectly unlike the mold this one replaced. I ordered it on a Saturday and Swede had it in the mail that afternoon. I got it Monday. Swede is a diligent business man. A+