PatMarlin
06-18-2011, 05:21 PM
...:Fire:
Patmarlins ROCKDock ™ -Machined Reloading Bench Docking Mount System
http://www.patmarlins.com/ROCKDock.jpg
Patmarlins™ Machined ROCKDock™ reloading bench Docking Mount System comes complete with (grade 8) bolts and instructions.
The ROCKDock™ Docking Mount- holds your gear down solid and spreads the foot print of your press base on your bench, spreading the load over the bench instead of stressing just the leading edge. Presses slide in and out solid without having to use a tool to tighten down.
Base plates- Predrilled with grade 8 bolts for your model reloading press, lube sizer, case prep tools, vises etc.
Specs:
The size of the useable space on the standard model ROCKDock™ base plate is approximately 5 1/2" wide and up to 6" deep, depending on the lube heater shelf. Lube heater shelf can be ordered fixed mounted or removable. Overall footprint is 8 1/4" wide x 7" deep.
The Large version ROCKDock™ base plate useable space is approximately 7" wide and up to 8" deep. Lube heater shelf is an optional item and removable only.
Overall footprint is 9 1/2" wide x 8" deep.
If it will fit there, it will work and can be mounted.
Bolt pattern for rail holes start from the front edge of the bench going backwards (on center): 1/2", 3", and 5 1/2".
You can counter bore for thicker areas, and/or add spacers underneath for thinner areas.
-Current prices for the Standard size and Large size ROCKDock™ systems:
Standard Size ROCKDock™
$36.95 -Standard Size ROCKDock™ docking mount including grade 8 bolts. Lube heater shelf is now an option.
$14.95 -Lube Heater Plate -order Fixed or Removable style. (Cross back piece)*****Optional Deduct if not desired, **please email preference.
$16.95 -Pre-drilled Standard base plates (most all presses) including grade 8 bolts.
$19.95 -Bases drilled for threaded powder measures (RCBS, Redding, etc. Specify for 1 or 2 measures)
$16.95 Dillon 650
$16.95 Dillon square deal
$16.95 Dillon 1050RL
$22.95 -Belding and Mull powder measure (milled and recessed to hold solid)
$19.95 -Mec 600's standard mount
$23.95 -Mec Super Sizer standard mount
$14.95 -Blank Standard base plates.
$16.95 -6" Blank Standard base plates
Special sub-plate bases:
$36.95 -Dillon 550, 550B
$36.95 -RCBS Pro-2000
SHELFDocks™ brackets $6.95 each (including mounting screws)
USPS Priority® Shipping:
$5.95 -Shipping up to 3 standard base plates and mount, plus $2.45 Signature confirmation.
$12.95 -Shipping over 3 standard base plates and mount. (Sub plate mounts $12.95 Med Flat Rate)
USPS Priority® International shipping (USD):
$23.95 -International shipping USPS Priority® Mail for up to 3 base plates.
$11.50 -Optional international full replacement loss coverage insurance (per order), your choice. We will not cover loss without insurance. **Optional Deduct if not desired.
$59.95 -International shipping Medium flat rate USPS Priority® Mail for larger orders.
**Insurance may be extra on larger International orders.
******************************
Large Size ROCKDock™
$36.95 -Large Size ROCKDock™ docking mount including grade 8 bolts, lube heater shelf not included.
$24.95 -Pre-drilled large plates (most all presses) including grade 8 bolts.
$24.95 -for the large Mecs
$21.95 -Blank Large plate 6" deep
$24.95 -Blank Large plate 8" deep
$28.95 -Base drilled for (2) threaded powder measures
$16.95 -Lube heater plate -Removable style only. (Cross back piece)*****Optional Deduct if not desired.
Special sub-plate bases:
$38.95 -Dillon 550, 550B
$38.95 -RCBS Pro-2000
$38.95 MEC Grabber 762R series(discontinued)
SHELFDocks™ brackets $6.95 each (including mounting screws)
USPS Priority® Shipping:
$12.95 -Shipping Priority® Mail Med Flat Rate
$17.95 -Shipping Priority® Mail Large Flat Rate
USPS Priority® International shipping (USD):
$59.95 -International shipping Medium flat rate USPS Priority® Mail for larger orders.
**Insurance may be extra on larger International orders.
-Prices are subject to change due to metals increases-
Please visit our website at:
http://www.patmarlins.com
Patmarlins SHELFDocks™
-storage brackets for your ROCKDock™ mounted presses.
Picture can be seen here:
http://castboolits.gunloads.com/showthread.php?t=118839
SHELFDocks™ are milled aluminum brackets drilled for (2) screws that allows you to securely store all of your reloading equipment.
Store all your ROCKDock™ base mounted presses on a shelf or secure area with SHELFDocks™.
Three (3) SHELFDocks™ brackets store two (2) base plate mounted presses. Works both for the Standard and Larger version ROCKDock™ base plates.
Machined 6061 T6 aircraft aluminum including screws.
-$6.95 per bracket.
-Prices are subject to change due to metals increases-
-All defects of any parts out of spec will be replaced pronto-
ROCKDock™ MASTER PRESS list (so far)
Designated to fit Standard or Large Version
Gear I have templates in stock for and have mounted...
Lyman 45 Lube Sizer -std, lrg.
Lyman 450 Lube Sizer (no internal heat opt.) -std, lrg.
Lyman 4500 Lube Sizer (bolt same as 450, has internal heat opt.) -std, lrg.
Lyman Lube Heater (4 hole heater base UNIVERSAL heater) -std, lrg.
Lyman 55 powder measure (.610 hole) -std, lrg.
Lyman All American (Lrg. only)
Lyman Orange Crusher -std, lrg.
Lyman Spar-T -std, lrg.
Lyman Spartan -std, lrg.
Lyman Tru-Line JR -std, lrg.
Lyman T-Mag press -std, lrg.
RCBS Garand (Lrg. only)
RCBS Mini Garand -std, lrg.
RCBS Turret (same as rock chucker 2 hole) -std, lrg.
RCBS A-3 (same rockchuker bolt patter) -std, lrg.
RCBS Ammomaster 3 hole -std, lrg.
RCBS Ammomaster BMG -std, lrg.
RCBS JR3 press -std, lrg.
RCBS Partner Press -std, lrg.
RCBS 4x4 press (Lrg. only)
RCBS Rockchucker -std, lrg.
RCBS Rockchucker II -std, lrg.
RCBS Rockchucker IV -std, lrg.
RCBS Rockchucker Supreme -std, lrg.
RCBS Rockchucker RS3 -std, lrg.
RCBS Lube-a-matic -std, lrg.
RCBS LAM II Luber -std, lrg.
RCBS Uniflow Powder Measure Stand -std, lrg.
RCBS Uniflow without stand -std, lrg.
RCBS Reloader Press (same as 2 bolt Rockchucker) -std, lrg.
RCBS "R.S." Reloading Special -std, lrg.
RCBS Auto Prime Tool -std, lrg.
RCBS 50 BMG Auto Prime Tool (same as "Auto prime tool") -std, lrg.
RCBS Pro-2000 -std, lrg.
RCBS Big Max (Lrg. only)
RCBS Trim Pro (Lrg. only) Sets on plate on angle. Top drill.
Hornady AP -std, lrg.
Hornady LnL Classic Single Stage Press -std, lrg.
Hornady Auto LNL -std, lrg.
Hordady LnL AP -std, lrg.
Hornady Projector Press -std, lrg.
Hornady LNL 50 BMG -std, lrg.
Hornady Powder Measure Stand -std, lrg.
Forester/Bonanza Co-ax B3 -std, lrg.
Forester Co-ax press -std, lrg.
Forester Case Trimmer (Lrg. only)
Dillon 550 (same as 550B) -std, lrg.
Dillon 550B std (w/subplate) -std, lrg.
Dillon 550B Lrg (no/subplate) -std, lrg.
Dillon 650 -std, lrg.
Dillon 1050 -std (w/removable Lube Heater Shelf), lrg.
Dillon Square Deal -std, lrg.
Dillon Super Swage -std, lrg.
Dillon Square Deal B (same as sq-deal) -std, lrg.
Dillon RL 300 (Lrg. only)
MEC 600 Jr (Pre '82) (3 hole) -std, lrg. (w/removable Lube Heater Shelf)
MEC 600 Jr ('82-'85 on) (3-4 hole) -std, lrg. (w/removable Lube Heater Shelf)
MEC Versa Mec (same as 600 3 hole) (w/removable Lube Heater Shelf)
MEC 600 -(3-4 hole) -std, lrg. (w/removable Lube Heater Shelf)
MEC 650 JR Mark 5 (Pre '82) (3 hole) -std, lrg. (w/removable Lube Heater Shelf)
MEC 650 JR Mark 5 ('82-'85 on) (3-4 hole) -std, lrg. (w/removable Lube Heater Shelf)
MEC Sizemaster (Lrg. only)
MEC Supersizer (Lrg. only)
Mec 9000 (Lrg. only)
MEC 8567 Grabber (Lrg. only)
MEC Case Conditioner -std, lrg.
MEC Grabber 762R series... Too Large- no can do!
LEE Classic Cast Single -std, lrg.
LEE Classic Cast Turret -std, lrg.
LEE Old style aluminum turret -std, lrg.
LEE Pro-1000 -std, lrg.
LEE Loadmaster -std, lrg.
LEE Reloader Press -std, lrg.
LEE "C" Reloader Press -std, lrg.
LEE Challenger "O" frame press -std, lrg.
LEE Breachlock Challenger -std, lrg.
Redding T-7 Turret Press -std, lrg.
Redding T-25 -std, lrg.
Redding Big Boss -std, lrg.
Redding Big Boss II -std, lrg.
Redding Ultra Mag -std, lrg.
Redding Ultra Mag II -std, lrg.
Redding Powder Measure (7/8" hole) without stand -std, lrg.
Redding 2400 Case Trimmer -std, lrg.
Saeco Lubesizer -std, lrg.
Star Luber Sizer -std, lrg.
Magma Star Luber Sizer -std, lrg.
C-H 204 C press -std, lrg.
C-H 4 Station Press (Lrg. only)
***No C-H Swage-O-Matic****
Herters 3A Press (Lrg. only)
Herters 0-3 Press -std, lrg.
Hollywood Press (Lrg. only)
Ponsness Warren P-200 Press (Lrg. only)
Ponsness Warren 375 Press (Lrg. only)
Shop Fox Parrot Vise (Lrg. only)
Mastercraft (Canadian) Vise (Lrg. only)
Lachmiller Lub-a-Matic -std, lrg.
Ross and Webb Press -std, lrg.
Sinclair International -std, lrg.
Sinclair Trimmer Stand -std, lrg.
Corbin Mighty Mite (Lrg. only)
Powder Measures -All makes of 7/8-14 threaded (7/8" hole) -std, lrg
Belding and Mull Powder Measure -std, lrg.
...:drinks:
.... :Fire:
Patmarlins ROCKDock ™ -Machined Reloading Bench Docking Mount System
http://www.patmarlins.com/ROCKDock.jpg
Patmarlins™ Machined ROCKDock™ reloading bench Docking Mount System comes complete with (grade 8) bolts and instructions.
The ROCKDock™ Docking Mount- holds your gear down solid and spreads the foot print of your press base on your bench, spreading the load over the bench instead of stressing just the leading edge. Presses slide in and out solid without having to use a tool to tighten down.
Base plates- Predrilled with grade 8 bolts for your model reloading press, lube sizer, case prep tools, vises etc.
Specs:
The size of the useable space on the standard model ROCKDock™ base plate is approximately 5 1/2" wide and up to 6" deep, depending on the lube heater shelf. Lube heater shelf can be ordered fixed mounted or removable. Overall footprint is 8 1/4" wide x 7" deep.
The Large version ROCKDock™ base plate useable space is approximately 7" wide and up to 8" deep. Lube heater shelf is an optional item and removable only.
Overall footprint is 9 1/2" wide x 8" deep.
If it will fit there, it will work and can be mounted.
Bolt pattern for rail holes start from the front edge of the bench going backwards (on center): 1/2", 3", and 5 1/2".
You can counter bore for thicker areas, and/or add spacers underneath for thinner areas.
-Current prices for the Standard size and Large size ROCKDock™ systems:
Standard Size ROCKDock™
$36.95 -Standard Size ROCKDock™ docking mount including grade 8 bolts. Lube heater shelf is now an option.
$14.95 -Lube Heater Plate -order Fixed or Removable style. (Cross back piece)*****Optional Deduct if not desired, **please email preference.
$16.95 -Pre-drilled Standard base plates (most all presses) including grade 8 bolts.
$19.95 -Bases drilled for threaded powder measures (RCBS, Redding, etc. Specify for 1 or 2 measures)
$16.95 Dillon 650
$16.95 Dillon square deal
$16.95 Dillon 1050RL
$22.95 -Belding and Mull powder measure (milled and recessed to hold solid)
$19.95 -Mec 600's standard mount
$23.95 -Mec Super Sizer standard mount
$14.95 -Blank Standard base plates.
$16.95 -6" Blank Standard base plates
Special sub-plate bases:
$36.95 -Dillon 550, 550B
$36.95 -RCBS Pro-2000
SHELFDocks™ brackets $6.95 each (including mounting screws)
USPS Priority® Shipping:
$5.95 -Shipping up to 3 standard base plates and mount, plus $2.45 Signature confirmation.
$12.95 -Shipping over 3 standard base plates and mount. (Sub plate mounts $12.95 Med Flat Rate)
USPS Priority® International shipping (USD):
$23.95 -International shipping USPS Priority® Mail for up to 3 base plates.
$11.50 -Optional international full replacement loss coverage insurance (per order), your choice. We will not cover loss without insurance. **Optional Deduct if not desired.
$59.95 -International shipping Medium flat rate USPS Priority® Mail for larger orders.
**Insurance may be extra on larger International orders.
******************************
Large Size ROCKDock™
$36.95 -Large Size ROCKDock™ docking mount including grade 8 bolts, lube heater shelf not included.
$24.95 -Pre-drilled large plates (most all presses) including grade 8 bolts.
$24.95 -for the large Mecs
$21.95 -Blank Large plate 6" deep
$24.95 -Blank Large plate 8" deep
$28.95 -Base drilled for (2) threaded powder measures
$16.95 -Lube heater plate -Removable style only. (Cross back piece)*****Optional Deduct if not desired.
Special sub-plate bases:
$38.95 -Dillon 550, 550B
$38.95 -RCBS Pro-2000
$38.95 MEC Grabber 762R series(discontinued)
SHELFDocks™ brackets $6.95 each (including mounting screws)
USPS Priority® Shipping:
$12.95 -Shipping Priority® Mail Med Flat Rate
$17.95 -Shipping Priority® Mail Large Flat Rate
USPS Priority® International shipping (USD):
$59.95 -International shipping Medium flat rate USPS Priority® Mail for larger orders.
**Insurance may be extra on larger International orders.
-Prices are subject to change due to metals increases-
Please visit our website at:
http://www.patmarlins.com
Patmarlins SHELFDocks™
-storage brackets for your ROCKDock™ mounted presses.
Picture can be seen here:
http://castboolits.gunloads.com/showthread.php?t=118839
SHELFDocks™ are milled aluminum brackets drilled for (2) screws that allows you to securely store all of your reloading equipment.
Store all your ROCKDock™ base mounted presses on a shelf or secure area with SHELFDocks™.
Three (3) SHELFDocks™ brackets store two (2) base plate mounted presses. Works both for the Standard and Larger version ROCKDock™ base plates.
Machined 6061 T6 aircraft aluminum including screws.
-$6.95 per bracket.
-Prices are subject to change due to metals increases-
-All defects of any parts out of spec will be replaced pronto-
ROCKDock™ MASTER PRESS list (so far)
Designated to fit Standard or Large Version
Gear I have templates in stock for and have mounted...
Lyman 45 Lube Sizer -std, lrg.
Lyman 450 Lube Sizer (no internal heat opt.) -std, lrg.
Lyman 4500 Lube Sizer (bolt same as 450, has internal heat opt.) -std, lrg.
Lyman Lube Heater (4 hole heater base UNIVERSAL heater) -std, lrg.
Lyman 55 powder measure (.610 hole) -std, lrg.
Lyman All American (Lrg. only)
Lyman Orange Crusher -std, lrg.
Lyman Spar-T -std, lrg.
Lyman Spartan -std, lrg.
Lyman Tru-Line JR -std, lrg.
Lyman T-Mag press -std, lrg.
RCBS Garand (Lrg. only)
RCBS Mini Garand -std, lrg.
RCBS Turret (same as rock chucker 2 hole) -std, lrg.
RCBS A-3 (same rockchuker bolt patter) -std, lrg.
RCBS Ammomaster 3 hole -std, lrg.
RCBS Ammomaster BMG -std, lrg.
RCBS JR3 press -std, lrg.
RCBS Partner Press -std, lrg.
RCBS 4x4 press (Lrg. only)
RCBS Rockchucker -std, lrg.
RCBS Rockchucker II -std, lrg.
RCBS Rockchucker IV -std, lrg.
RCBS Rockchucker Supreme -std, lrg.
RCBS Rockchucker RS3 -std, lrg.
RCBS Lube-a-matic -std, lrg.
RCBS LAM II Luber -std, lrg.
RCBS Uniflow Powder Measure Stand -std, lrg.
RCBS Uniflow without stand -std, lrg.
RCBS Reloader Press (same as 2 bolt Rockchucker) -std, lrg.
RCBS "R.S." Reloading Special -std, lrg.
RCBS Auto Prime Tool -std, lrg.
RCBS 50 BMG Auto Prime Tool (same as "Auto prime tool") -std, lrg.
RCBS Pro-2000 -std, lrg.
RCBS Big Max (Lrg. only)
RCBS Trim Pro (Lrg. only) Sets on plate on angle. Top drill.
Hornady AP -std, lrg.
Hornady LnL Classic Single Stage Press -std, lrg.
Hornady Auto LNL -std, lrg.
Hordady LnL AP -std, lrg.
Hornady Projector Press -std, lrg.
Hornady LNL 50 BMG -std, lrg.
Hornady Powder Measure Stand -std, lrg.
Forester/Bonanza Co-ax B3 -std, lrg.
Forester Co-ax press -std, lrg.
Forester Case Trimmer (Lrg. only)
Dillon 550 (same as 550B) -std, lrg.
Dillon 550B std (w/subplate) -std, lrg.
Dillon 550B Lrg (no/subplate) -std, lrg.
Dillon 650 -std, lrg.
Dillon 1050 -std (w/removable Lube Heater Shelf), lrg.
Dillon Square Deal -std, lrg.
Dillon Super Swage -std, lrg.
Dillon Square Deal B (same as sq-deal) -std, lrg.
Dillon RL 300 (Lrg. only)
MEC 600 Jr (Pre '82) (3 hole) -std, lrg. (w/removable Lube Heater Shelf)
MEC 600 Jr ('82-'85 on) (3-4 hole) -std, lrg. (w/removable Lube Heater Shelf)
MEC Versa Mec (same as 600 3 hole) (w/removable Lube Heater Shelf)
MEC 600 -(3-4 hole) -std, lrg. (w/removable Lube Heater Shelf)
MEC 650 JR Mark 5 (Pre '82) (3 hole) -std, lrg. (w/removable Lube Heater Shelf)
MEC 650 JR Mark 5 ('82-'85 on) (3-4 hole) -std, lrg. (w/removable Lube Heater Shelf)
MEC Sizemaster (Lrg. only)
MEC Supersizer (Lrg. only)
Mec 9000 (Lrg. only)
MEC 8567 Grabber (Lrg. only)
MEC Case Conditioner -std, lrg.
MEC Grabber 762R series... Too Large- no can do!
LEE Classic Cast Single -std, lrg.
LEE Classic Cast Turret -std, lrg.
LEE Old style aluminum turret -std, lrg.
LEE Pro-1000 -std, lrg.
LEE Loadmaster -std, lrg.
LEE Reloader Press -std, lrg.
LEE "C" Reloader Press -std, lrg.
LEE Challenger "O" frame press -std, lrg.
LEE Breachlock Challenger -std, lrg.
Redding T-7 Turret Press -std, lrg.
Redding T-25 -std, lrg.
Redding Big Boss -std, lrg.
Redding Big Boss II -std, lrg.
Redding Ultra Mag -std, lrg.
Redding Ultra Mag II -std, lrg.
Redding Powder Measure (7/8" hole) without stand -std, lrg.
Redding 2400 Case Trimmer -std, lrg.
Saeco Lubesizer -std, lrg.
Star Luber Sizer -std, lrg.
Magma Star Luber Sizer -std, lrg.
C-H 204 C press -std, lrg.
C-H 4 Station Press (Lrg. only)
***No C-H Swage-O-Matic****
Herters 3A Press (Lrg. only)
Herters 0-3 Press -std, lrg.
Hollywood Press (Lrg. only)
Ponsness Warren P-200 Press (Lrg. only)
Ponsness Warren 375 Press (Lrg. only)
Shop Fox Parrot Vise (Lrg. only)
Mastercraft (Canadian) Vise (Lrg. only)
Lachmiller Lub-a-Matic -std, lrg.
Ross and Webb Press -std, lrg.
Sinclair International -std, lrg.
Sinclair Trimmer Stand -std, lrg.
Corbin Mighty Mite (Lrg. only)
Powder Measures -All makes of 7/8-14 threaded (7/8" hole) -std, lrg
Belding and Mull Powder Measure -std, lrg.
...:drinks:
.... :Fire: