Redfield Receiver Sights

[Denver]

I need the little screw that holds the elevation window "thingy" in place. Tried to use one from another sight that I have, but was too small. Don't know what size they are or even where to look to find one. Any help would be appreciated.

Thanks, Ron

[Herb in Pa]

Try looking through here: http://www.e-gunparts.com/cproducts.asp?idDept=386

[waksupi]

Ron, you could also call Brownell's tech staff, and tell them what you need. I bet they could come up with the right one, and it may not even cost you anything. It seems like we used to have a Brownell's staff member on this board, maybe they will chime in, if they followed the board change.

[Denver]

Thanks for the help fellas. I checked out the Gun Parts site. They list a sideplate screw under 4 different part #s. No size given, but they are sold out on all. I'll try Brownells. Might be they have what I need or something that will do til I find the right one.

Ron

[Buckshot]

............If Brownells falls through you might try merely matching the screw diameter and thread pitch. It may be a 4-40 or 4-48. Possibly even smaller (or larger :-)?) like a 2-56. Check out smallparts.com, plus MSC or McMaster-Carr. You won't be able to buy just one I doubt, but even $10 for a box of'em would be worth it to get your sight back together if there was no other option.

.............Buckshot