Interest in a .43 Mauser Group Buy?

[quasi]

something like the RCBS .43 Mauser or:?, made by N.O.E. perhaps? What are your thought's?

[mtnman31]

I'd be interested, but I think it will be tough to drum up enough interest to make a group buy out of it.

[SciFiJim]

If you can provide more information and possibly a picture, you might get more traffic and interest. I tried looking up "RCBS .43 Mauser" on the RCBS website and didn't find anything. I do know that .43 is 11mm so if anyone is looking for a mold for a 11mm Mauser they might be interested.

[SwedeNelson]

Quasi

.43 Mauser
One of my fun-est shooters.
http://i69.photobucket.com/albums/i80/swedenelson/44370GrFNRCBS001.jpg
RCBS 44-370-FN

Swede Nelson

[dromia]

Yep 43 Mauser I'm in if its a runner. :-D

[dromia]

Forgot about this and it needs a bump!

[Aaron]

What is the dimensions?

[dromia]

Bump!

[Texinoz]

I would be interested in a boolit like the RCBS (Sharps) 44-370 - but in a heavier weight.
I am looking for something in the 450 to 480gn weight to use as a BPCR Silhouette load
(and it needs to be .452 diameter as I have a deep groove rifle that doesn't like .446 dia).
And it would help if it were more "pointy" for 500m shooting - not a hunting boolit for me.
Having said all that, I probably need to start a new thread...
Mark

[Cbenc1]

I am interested.

[dominicfortune00]

How about a mold for paperpatch boolits for the 11 mm Mauser like the originals?

I'd be interested in that.

[mtnman31]

I really like the idea of a dual cavity mold, one paper patched cavity and one lube groove cavity. That would be great although it would surely bump the price a few bucks. I can wish can't I? Christmas is coming.

[dromia]

Up we go.

Steady away and keep the faith. :cbpour:

[adrians]

i just saw this thread and if it's a go ,,, i could be tempted [smilie=1:

[badgeredd]

Something in a 350 grain or so for 43 SPANISH would be enticing to me. Just isn't much out there. <439 that Lyman makes is too small and the .446 is too big...yeh I know a guy could size it down. BUT since this thread is for a much fatter boolit, I'm out of line.

Edd

[dromia]

Bump!

[adrians]

and up we go.
you know you need one.....:twisted:.....:bigsmyl2:.....:evil:

[adrians]

The more I think about it an NOE version of the RCBS 44-370-FN would be just the ticket. Cut to cast a couple of thousandths above .446" out of 50% wheelweight / 50% pure lead would suit me perfectly. Dutch..

my sentiments exaclty, if this g/b isn't a go ,which it will be i hope .
i have already contacted tom at accurate for the design you mentioned cut to .447+/- as i ust got my rifle and slugged the beasty and it's right on .446 ,,amazing!!! for its age (man-1888).
this group buy discussion should be on the active thread,,,,, i can dream can;t i???
:evil::cast_boolits::twisted:

[Beekeeper]

I would be in for a 2 cavity with one for PP and the other .446 GG


beekeeper

[dromia]

TTTop for 2012

[bullshot]

Must have missed this one. Would want a multi cav for my Sharps 44-70.

[dominicfortune00]

I want a 4 cavity paper patch mould for the 11mm Mauser.

[adrians]

bump,,bump

[quasi]

well , there is this guy with this Boolit.

http://www.generalordnanceusa.com/44Cailber.html

I have no experience with him or his products.

[dromia]

Do a search there are multiple threads running on this mould maker now.

[Chicken Thief]

My Mauser slugs .447" so if size is in my favor then i'm in!

[adrians]

it's alive ,, it's alive,,, lets keep this thing breathing ....:twisted: :coffeecom :evil:

[SwedeNelson]

Something to look at.
http://i69.photobucket.com/albums/i80/swedenelson/1111-202-448370GrFN.jpg

Swede Nelson

[leadman]

I'm doing real well with the Lee 300gr sized .450" in my 43 Mauser. I have the Lyman mold and it does ok but the Lee cuts group sizes in half.

Are you thinking a gas check, plain base, or paper patch mold?

[dromia]

Something to look at.
http://i69.photobucket.com/albums/i80/swedenelson/1111-202-448370GrFN.jpg

Swede Nelson


Phwoarrrrrrrrrrrrrrrrrrrrrrrrrr!

[dromia]

I'm doing real well with the Lee 300gr sized .450" in my 43 Mauser. I have the Lyman mold and it does ok but the Lee cuts group sizes in half.

Are you thinking a gas check, plain base, or paper patch mold?


See post No 30 for proposed design.

[dromia]

Just a thought Al, would it be possible to do it in an RG mould with HB & PB pins like we are doing with the NOE 515141 450Gr FN 50-70 boolit?

[Chicken Thief]

So when does this go into action?
Cause i'm defenetly in on that beautyhttp://i295.photobucket.com/albums/mm153/Chickenthief/Blandet/Smilere/Lovesmiley.jpg

[adrians]

Phwoarrrrrrrrrrrrrrrrrrrrrrrrrr!

i'm soooooo ready for this one,,,,,:twisted:[smilie=w::evil:

[Janoosh]

Ok. I'm in for a paper patch mould and a mould according to the drawing.

[Janoosh]

Moving this to the top! This mould in a four cavity, two GG and two paper patch, Or simply two, two cavity moulds, once again, PP and GG will be ideal. Wake up those safe queens! Make those wall hangers talk again!

[dominicfortune00]

I want a 4 cavity paper patch mould for the 11mm Mauser.

[Chicken Thief]

http://i295.photobucket.com/albums/mm153/Chickenthief/Blandet/Smilere/bumpit-1.gif

[Olevern]

well , there is this guy with this Boolit.

http://www.generalordnanceusa.com/44Cailber.html

I have no experience with him or his products.

this is a quote from this guys description of this particular boolit:

"This is a good design for small to medium game and personal defence."

HUH!

small to medium game? I'd like to know what he would use for big game?
Well, already got the squirrels covered. As for personal defense? Guess I oughta put that handgun back in the safe and keep an 11mm rifle in the nightstand (or in my holster)

[adrians]

And another :twisted: :coffeecom :evil:

[Dutch4122]

Swede-

One question about this design. What is the length of the bore riding section on the nose?

Thanks,

[SwedeNelson]

Dutch4122

BR is .210" long

Swede Nelson

[Dutch4122]

Dutch4122

BR is .210" long

Swede Nelson


That'll work, thanks!:mrgreen:

[happy7]

I would be in for one of these.

[mtnman31]

BTT - Keep this idea going.
Still like to see a combo mold, one paper patch cavity and one grease groove cavity.

[dromia]

TTTop

[DrB]

and up we go.
you know you need one.....:twisted:.....:bigsmyl2:.....:evil:

Oh, it's a bad sign when you find yourself tempted to build a rifle just so you have a reason to buy a new caliber mold. "Sounds like it could be a nifty caliber for big game..." "I don't have a bolt rifle in that large a caliber..." "surely I could do it cheap on an old Mauser action, it wouldn't cost that much"

No, no, no. (or at least, not yet).

Bump for those of weaker resolve.

[jethunter]

I would be in for a 2 or 4 cav PB

[Chicken Thief]

http://i295.photobucket.com/albums/mm153/Chickenthief/Blandet/Smilere/nothingtoadd.gif

[Chicken Thief]

If this does'nt happen within a month, i'll order a custom.
Cant wait forever!

[SwedeNelson]

Chicken Thief

No way is this going to happen that fast from us.
Get with Tom at Accurate Molds
http://www.accuratemolds.com/index.php


Swede Nelson

[quasi]

I have purchased an RCBS mold for now.

[Janoosh]

Hey..... Wake UP!!!!!!! This is a GREAT deal in a two cavity, one PB, one Paper Patch, Mold! Where is everybody? In a $Money$ coma?