The 32 Sixgun Sledgehammer is HERE!

[2 dogs]

How many of you own a Buckeye 32-20?? Or a new Ruger 327 Federal??



This buy is for a Miha 4 cavity brass cramer style gas check HP mold intended for heavy duty 32magnum loads, 32-20s and the new 327 Federal. It should drop at 314" from the mold. From my Buckeye 32-20, using rifle primers and H110 I have driven a LBT style bullet at 1540 fps with excellent accuracy. This design should easily exceed 1400 fps with no strain on your revolver. It should weigh 140 grains in solid form and 135 grains in HP form.

We cant exect Miha to put a cost on this yet as this mold may be as much as a year out and we cant predict the cost of materials. We can otherwise expect it to be priced as usual. Mihas molds are a tremendous value at any price and are the best I have ever used. There are many molds ahead of us, so the sooner we get started here the sooner we will see our molds.

I will keep an eye on this thread and add the names to the list. Please disguise your email address and state how many molds you want.

fcgarza0640 AT hotmail DOT com ONE mold
g99jeb at aol dot com ONE mold (plus 1 set of flat pins)
cristofori at att dot net ONE mold (plus 1 set of flat pins)
wmb30 at att dot net ONE mold (plus 1 set of flat pins)
hoover0588 at aol dot com ONE mold (plus 1 set flat pins)
fdombek at jeffreysmfg dot com ONE mold (plus 1 set flat pins)
exit13five at aol dot com TWO molds (plus 2 Sets flat pins)
cpeer at charter dot net ONE mold
curleyqlink at hotmail dot com ONE mold
steve at groundwaterresourcespllc dot com ONE mold (plus 1 set of flat pins)
sthwld64 at gmail dot com ONE mold (plus 1 set of flat pins)
bfowler at wescolaser.com ONE mold (plus 1 set of flat pins)
crittrcallr AT sbcglobal DOT net ONE mold (plus 1 set of flat pins)
mjcrookston at msn dot com ONE mold (plus 1 set of flat pins)
rugersa44 AT yahoo DOT com ONE mold (plus 1 set of flat pins)
dgilbert07atwindstream.net ONE mold (plus 1 set of flat pins)
brownbess1775 AT AOL.COM ONE mold (plus 1 set of flat pins)
xtrek64 at yahoo dot com ONE mold (plus 1 set of flat pins)
5090shiloh at gmail dot com ONE mold (plus 1 set of flat pins)
jasonj850 AT yahoo DOTcom ONE mold (plus 1 set of flat pins)
kabukie at roadrunner dot com ONE mold (plus 1 set of flat pins)
hallms AT bigpond DOT com ONE mold (plus 1 set of flat pins)
Dennis dot a dot ulrich at gmaildotcom ONE mold (plus 1 set of flat pins)
Thadd3220 at yahoo dot com ONE mold
coverbw at yahoo dot com ONE mold
ARCEAGLE wild BLUE dot Net ONE mold (plus 1 set of flat pins)
kingspumping AT gmail DOT com ONE mold (plus 1 set of flat pins)
elmcclur at g mail dot com ONE mold (plus 1 set of flat pins)
sixgunner67atyahoodotcom ONE mold (plus 1 set of flat pins)
Jeff AT Appalachian Ammo DOT com ONE mold (plus 1 set of flat pins)
KTM.kanyid at gmail dot com ONE mold (plus 1 set of flat pins)
hallms at bigpond dot com ONE mold (plus 1 set of flat pins)
guhndawg at gmail dot com ONE mold (plus 1 set of flat pins)
toyon.wiggs at gmail ONE mold (plus 1 set of flat pins)
thaine AT yucca DOT net ONE mold (plus 1 set of flat pins)
boo-haaa at hotmail dot com ONE mould and 1 set of flat pins
ktlachac at aol dot com ONE mould and 1 set of flat pins
drbrentrjohnson AT aol DOT com ONE mould and 1 set of flat pins
fugowii at gmail dot com One mold and 1 set of flat pins
rbrb10238 at gmail dot com One mold and 1 set of flat pins
guhndawg at gmail dot com One mold and 1 set of flat pins
fivegunner-at-sbcglobal-dot-net One mold and 1 set of flat pins
ktensig AT ilstu DOT edu One mold and 1 set of flat pins
eric at whitetiger blog dot com One mold and 1 set of flat pins
mvfester at gmail dot com ONE mold (plus 1 set of flat pins)
Woody402 at rochester dot rr dot com One mold (plus 1 set flat pins)
wmclark @ email DOT com One mold (plus 1 set flat pins)
jrayborn AT myfairpoint DOT net One mold (plus 1 set flat pins)
hallms at bigpond dot com One mold (plus 1 set flat pins)
Dschuttig at yahoo dot com One mold (plus 1 set flat pins)

THIS BUY IS CLOSED

[2 dogs]

The original thread is here....

http://castboolits.gunloads.com/showthread.php?t=96453

[taugust]

One (1) mold please.

g99jeb at aol dot com

Thanks.

Tom

[Cristofori]

One mold please (plus 1 set of blank pins for FP)

cristofori at att dot net

Thanks for running this.

Chris

[WMB30]

wmb30 at att dot net one mold
Bill

[2 dogs]

updated

[Zeus]

Put me down for one Fermin...Thanks GS

gswaggart (at) hotmail dot com

[Ramslammer]

G'Day
I'd like one mold please.
namovlov at bigpond dot com

2dogs maybe you should put the drawing on this thread.
Thanks
Juddy

[Hickory]

Is this the end result?


http://castboolits.gunloads.com/attachment.php?attachmentid=31380&stc=1&thumb=1&d=1302526377

[cast-n-blast]

I'm in !

jeffrey dot hoover at montgomerycountymd dot gov

[2 dogs]

Hickory, yes it is! Can someone post the picture?? I tried but my Jedi Internent skill are weak....

[cast-n-blast]

http://i903.photobucket.com/albums/ac232/hooveje588/314-140-LFN.jpg

Great looking bullet, Fermin !

May the force be with you !

How about getting some blank pins, so when you cast solids, they are flat to the bottom of the mold, for us bottom pour guys with mold guides ?

[Muleshoe Slick]

Put me down for one and a set of pins.

muleshoeslick at yahoo dot com

[2 dogs]

Thats a really good idea Jeff!!

[frankenfab]

I'll take one.

fdombek at jeffreysmfg dot com

[2 dogs]

updated.

[WMB30]

Fermin
Please add flat pins to my mold order..Thanks
Bill

[Fugowii]

Can I get a drawing with dimensions?

Thanks,

F

[Zeus]

2 dogs, can you add a set of flat pins to my order if he will do those.....Thanks!! GS

[sixshot]

PUt me down for a set & a set of blank pins.

Thanks, Dick

[2 dogs]

Dick, I need your current email address please!!!

Fugowii, you need to PM 45 2.1 for the diagram with dimensions. He did our drawing.

[2 dogs]

Updated, you guys let me know if I missed anything.

Ya'll might also post this link on your other favorite websites so our other 32 sixgun shooters can jump in on this buy!

[chprplt]

Please put me down for two (2) molds with a set of blank pins for each.
exit13five at aol dot com
Thanks for running this one.
Rich

[Dark Helmet]

Penta pins?

[2 dogs]

Dark Helmet, this mold wont have penta pins. It is intended to have a modest HP cavity.

[castblast]

I've had my eye on a new 327 blackhawk for awhile.

Can anybody tell me the crimp to nose measurement of this sledgehammer?

Am I going to need a taller front sight?

Also, has anyone has measured their blackhawk (bore and throat diameter, throat length).

I figure if I ask enough questions, I'll talk myself out of this one.

[2 dogs]

Castblast, .400, probably not, Yes.

Instead of asking 1000 questions, take a few minutes and read the original thread. Lots of information on the potential of this bullet there. After that, sign up!

[2 dogs]

Updated. Added a REAL 32 sixgun man today! Thanks Chcrplt.

[Clyde]

cpeer at charter dot net...one mold

[2 dogs]

Updated. That puts us at 13 in just a couple of days. Not bad at all!

[Mohillbilly]

curleyqlink at hotmail dot com for one

[2 dogs]

We are 14 molds as of today.

Updated.

[45 2.1]

Weights are lubed and gas checked, ready to load. 140 gr. solid, 135 gr. hollow point, 0.240" meplat (76.4%), 0.400" meplat to crimp groove, 0.314" as cast diameter.

Something to look at:

[cubrock]

One mold and one set of blank pins.

steve at groundwaterresourcespllc dot com

[2 dogs]

16 molds. Updated.

[castblast]

OK, I'm in.

sthwld64 at gmail dot com ONE mold (plus 1 set of flat pins)

[2 dogs]

Count is now 17 molds.

Updated.

[2 dogs]

We are #18 now.

Updated.

[luigi's mongey]

1 mould please

caroldavid9 (at) bigpond dot com

thanks

dave

[2 dogs]

19

Updated. Thanks to all.

[RICHP]

richpatitexasdotnet, one mold and one set of extra pins.

[Fowler]

Dang it Fermin, I'm in bfowler at wescolaser.com

[2 dogs]

updated

21

[Sheriff]

I'm still good for one mold. crittrcallr@sbcglobal.net

[2 dogs]

updated.

22

[ldmcrook]

One mold and a set of pins please. Thanks.

mjcrookston at msn dot com

[frankenfab]

I'm getting confused at the mention of "flat pins" and "blank pins". Don't the hollow point pins that come with the mold already reverse to make flat point boolits? Blank pins would be as long as the hollow point pins, but not contoured on either end.

[2 dogs]

Updated. 23.

frankenfab, yes you can reverse the HP pins to make flatpoints, but the protruding points catch on some of the casting pot mold guides. The flat pins make flat points but dont protrude outside the mold.

[frankenfab]

Updated. 23.

frankenfab, yes you can reverse the HP pins to make flatpoints, but the protruding points catch on some of the casting pot mold guides. The flat pins make flat points but dont protrude outside the mold.

Ahhh, ok. Thanks for clarifying. You know, I have been thinking of ideas to make a better mold guide for the Lee 4-20. I will have to keep the pin protrusion problem in mind when I do so.

[Ramslammer]

G'Day 2dogs
Could you include a set of pins for flat nose boolits with my mold please?
Juddy

[2 dogs]

Yes Sir. Will add them here in a while.

[2 dogs]

updated. we're up to 24 now.

[cast-n-blast]

Good work, Fermin !

[ddixie884]

Just got home from 35 days on the road. Please put me down for one mold with a set of FP pins.

dgilbert07 at windstream dot net

[2 dogs]

Wow, we made 25! Im quite pleased, thanks to all for your participation.

updated.

[nanuk]

has anyone considered this on in a .303british for a plinking/small game round?

in PB it would seat well, BUT is it appropriate for the throat?

[2 dogs]

This is a bit of a specialized bullet with a specific purpose. That doesnt mean it wouldnt have some other applications. Will it work in your 303? That depends on your 303s throat dimensions. There is no plain base option with this bullet at this time.

[Ramslammer]

G'Day All
I also reckon this would be a ripper in a .303. I intend to use it in a Marlin 32/20 and will have to severely trim cases for it to fit. But I hope to have a no5 soon so it'll certainly be going in that. The gas check will be needed I reckon.
Juddy

[nanuk]

what are the expected cost for this?

[2 dogs]

For a 4 cavity Cramer and 2 sets of pins approx 165 US Dollars shipped. Miha will tell us for sure later.

[MikeNV]

I'm in for 1 mold and a set of flat pins.
brownbess1775 AT AOL.COM

[2 dogs]

Updated with #26.

[2 dogs]

Nearly 2000 views!

[Ramslammer]

G'Day two dogs
When is this buy going to the mill?
Juddy

[2 dogs]

When Miha says so..... Might be awhile yet.....

[taugust]

Please add a set of flat pins to my order of one mold.

My order is second from top or:
listed as g99jeb at aol dot com

Thanks

Tom

[2 dogs]

updated.

[WMB30]

Ttt..

[2 dogs]

This group buy is still open!

[Low Friction]

I'll take 1 mold plus a set of flat pins.

xtrek64 at yahoo dot com

[2 dogs]

Twenty Seven.....

[Landric]

This one wouldn't happen to be available as a plain base solid would it? I don't need HP boolits in this one, and I would prefer the PB and a solid mould design.

[2 dogs]

Im afraid not....Sorry.

[Aaron]

Please put me down for one mold and all pins.

Thanks

Aaron

5090shiloh at gmail dot com

[2 dogs]

28!!!!

[2 dogs]

This group buy is still open!!! Sign up today!!!

[jj850]

I'll be in for one.With extra pins. jasonj850 AT yahoo DOTcom

[2 dogs]

TWENTYNINE takers!!! Way to go guys!!

This is going to be a dandy sixgun bullet. Sign up today!!!

[jrayborn]

Oh well, put me down as number thirty. I'll need the flat pins too, thanks.

jrayborn AT myfairpoint DOT net

[2 dogs]

30

Were big time bound!!!

[WMB30]

ttt go

[2 dogs]

PM sent to Miha, so if you are thinking you want in, now is the time.

[Dark Helmet]

Put me in for one with a set of flat pins too, thanks.
kabukie at roadrunner dot com One mold (plus 1 set of flat pins)

[2 dogs]

I will, but you gotta gimme your email address like on the list.....plz.... :-)

[nanuk]

Such a nice looking boolit....

so tempting

it SEEMS to be near perfect for a plinker in a 30cal rifle.

haven't seen the specs on it yet though.

[2 dogs]

31 molds

[Texinoz]

Hoo boy I might get into trouble but please put me down for one mold with flat and HP pins.

hallms AT bigpond DOT com

[denul]

2 dogs ,miha is inquiring about this on the prior thread in discussions, and put me down for 4 cavity,all pins. Dennis dot a dot ulrich at gmaildotcom

[2 dogs]

33 molds! :-)

[bronte454]

can a longer set of blank pins be gotten to make ur own longer HP pins

[2 dogs]

You would have to arrainge that with Miha.....

[Fugowii]

Is there definitive pricing on this mold yet?

[2 dogs]

Not till Miha looks it over. My last PM from him was regarding the final specs of the mold itself. I directed him to 45 2.1 who was good enough to do our drawing.

Mihas molds are always bargain priced for what they are. I dont know how long we are going to be able to get away with this!!!

[bronte454]

any idea when this is going to run . I'm on a couple other group buys and can't afford all in one month . So i don't want to over commit . thank you

[Muleshoe Slick]

btt:Fire:

[MiHec]

I just receive 45 2.1 drawing.

I will order a cherry asap

[2 dogs]

Guys, were on deck! I would suggest if you want this bullet you get on the list here pretty soon!!!

[bronte454]

Put me down for one mold. Thadd3220 at yahoo dot com 76903 thank you

[2 dogs]

Updated with #34!

[Ken TN]

I'll take one plus a set of flat pins. My new SP 101 will be on a CAST diet.
I just got the Ranch dog TLC-313-115 to load up my first batch.

KD5LHG at yahoo dot com 1 mold and set of flat pins

Thanks
Ken

[2 dogs]

Thirty FIVE!

[Muleshoe Slick]

bump to top

[coverbw]

Resistance is futile....

Put me in for one mold please.


coverbw at yahoo dot com

Thanks,

Brandon

[jrayborn]

Sorry guys, but I need to drop out of this one.

Jon

[btroj]

Anyone know if this will feed in a Marlin 1894? If so I may have to get one.

[2 dogs]

This is intended to be a sixgun bullet. To get it to work in your Marlin, you may have to deep seat it or modify your action for longer bullets. We just dont know.

[2 dogs]

Updated

[2 dogs]

I checked with Miha to see if we were getting close. We are on track, but he relates he has alot of machine work to do yet.

We are getting there!

[nanuk]

Can I get a drawing with dimensions?

Thanks,

F

seems like, No

[45 2.1]

seems like, No

Hmmmmmmmmmmm............... Fermin posted the link to the original thread on post #2. If you go there you would find the information on posts 121 and 124.

[Bardo]

Dose anyone now what the ballistic coefficient will be on this bullet?

[nanuk]

sorry about my comment.

I guess I am just getting used to folks posting pics with All the diameters and lengths marked on the pic.

is this info all that Mihec has to go on to cut a cherry?

as my experience in this area is limited, I cannot look at a pic, have one dimension given and from that, deduce all the rest.

I can come pretty close, but that usually isn't good enough.

I guess I should trust that, with your experience, the design will work as intended.

[Ramslammer]

G'Day All
To answer btroj's question It will if you trim back some cases. I seem to have a heap of 32/20 molds for my 1894cl but still want this one, because I reckon in the right cicumstances this'll make the 32/20 a reasonable killer on medium game (goats, Fallow deer). Note I say right cicumstances ie getting close!
I intend to trim some cases to fit and in fact I've been trying to source some nickel Remington cases so I don't mix them with full length ones.
Might be a bit of mucking about but I reckon it would be worth it.
Juddy

[45 2.1]

I guess I am just getting used to folks posting pics with All the diameters and lengths marked on the pic. The so called drawings you see do not have all the pertinent information on them. You can not see all that is there.

is this info all that Mihec has to go on to cut a cherry? He gets an AutoCad drawing that has complete information in it.

as my experience in this area is limited, I cannot look at a pic, have one dimension given and from that, deduce all the rest. Most of the major dimensions have been given...... all the minor really important dimensions and shapes, that you do not see, that allow better fit to the throat and allow better accuracy to occur when you do your part right.

[kirb]

I had better get on the list for this one xp30br@silverstarbroadband.com. add pins

thanks

Kirb

[2 dogs]

Kirb, updated. So, you're thinking this bullet will work in your 30BR???

Interesting!

[kirb]

never know will try the 32 maggie.327, and 32-20 first than maybe. The 30BR really likes my rg4 and a Eagan mold.

Kirb

[ohnomrbillk]

Count me in

william (dot) kinderknecht (at) gmail (dot) com ONE mold (plus 1 set of flat pins)

[2 dogs]

Updated with #37!

[WMB30]

^^^^^

[2 dogs]

Lets not get lost here.....

[Dark Helmet]

Had to change my email address, post #83

[GregP42]

OK, I admit my search skills suck, but that is the cost on this one and is it still open?

[Dark Helmet]

See post #60 for an estimate http://castboolits.gunloads.com/showthread.php?t=113612&page=3

[2 dogs]

Had to change my email address, post #83


Dark Helmet, if you want me to change your email in post #1 I need both your old and new email addresses!

[kirb]

2 dogs would you change my email to xp30br at silverstarbroadbanddotcom mine is the 2nd from the bottom in 1 post

Kirb

[Dark Helmet]

2 dogs - my old address - kabukie at embarqmail dot com One mold (plus 1 set of flat pins)
and the new -kabukie at roadrunner dot com One mold (plus 1 set of flat pins) Thanks!

[gandydancer]

Wow, we made 25! Im quite pleased, thanks to all for your participation.

updated.
is this still open?

[2 dogs]

Gandydancer, yes it is.

Updated.

[RICHP]

Need my e-mail changed, from richp@itexas.net to (richlp1 at verizon dot net).

[GregP42]

See post #60 for an estimate http://castboolits.gunloads.com/showthread.php?t=113612&page=3


Thanks, but dang, I just can't afford that much for another mold for me 32-20s.

Greg

[frankenfab]

Please add flat pins to mine.

Thank you![smilie=s:

[2 dogs]

frankenfab, help me out here. What is your email address where you want me to make this change?

Otherwise updated.

Oh yeah, you are welcome.

[frankenfab]

fdombek at jeffreysmfg dot com

[2 dogs]

Updated.

[Czech_too]

I'm in on this one, one mould w/set of flat pins
czech_too at yahoo dot com

[Muleshoe Slick]

Cancel my order.
Muleshoe Slick

[2 dogs]

Updated

[rbrbrb6]

Fermin, put me down for one of these with a set of pins to make flat points as well as hollow points.

Thanks Chief you pig shooter you!

Robb

[denul]

Fermin - Someone just reopened the earlier thread in the "Group Buy Discussion" forum, with a response to Miha's July post, in which he had requested a final design. The result in that thread is definitely not this design (post #12 here) which everyone on this thread has chosen. I'm hoping Miha has the right design, but also wonder if that old thread should be closed to prevent confusion and disappointment.

[2 dogs]

denul, please notify the moderator. Im quite sure Miha has it right, he aint got one wrong yet!

[2 dogs]

Rob, post your email address in disquise like the other guys please....

[kirb]

2 Dogs,
My email is 3rd from the bottom should read xp30bratsilverstarbroadbanddotcom. I see Dicks email on the list towards the top his has changed also. Our service was bought out if you talk with Dick he will more than likely want it changed to the correct email
.

Kal

[2 dogs]

Ok, Kirb, I fixed it.

Updated.

Robb, still need your email plz....

[Arceagle]

If it's not too late I would like to get in on this buy. I would like one mold with both the hollow point and flat nose pins.
I'm new to this group buy thing and not to sure of the disguised E-mail, but here is a try. I'll PM you the real one. Thanks

ARCEAGLE wild BLUE dot Net

[2 dogs]

updated

[2 dogs]

OK Robb, I got your email added.

UPDATED

I count 38 molds.

[r1kk1]

Can I get a top punch and mould?

What is the cost?

take care,

r1kk1

[r1kk1]

Can I get a top punch and mould?

What is the cost?

take care,

r1kk1

elmcclur at g mail dot com

[2 dogs]

r1kk1, got you on the list. We dont have a exact cost just yet. Should however be soon.

[Jeff Michel]

I would like one mold with hollow point pins.
bmsouderatymaildotcom.
Thanks,
Jeff Michel

[2 dogs]

updated

[Ramslammer]

G'Day
Did anyone check Miha had the right design. I think it was a copy of Denuls lbt.
Juddy

[dmize]

If there is still time i would like one with hp and flat pins.
sixgunner67atyahoodotcom

[2 dogs]

updated. We gotta be gettin close!

[pack3480]

dcasad at hotmail dot com TWO MOLDS

[Jeff Michel]

2 dogs,
Could you modify my request to include all pins? Sorry for the hassle.
Thank you,
Jeff Michel
bmsouderatymaildotcom

[Arceagle]

Has anybody had any luck looking for .327 Federal Magnum loading data using a 140 gr. cast bullet? I have looked thru my regular sources and have not had any luck.

[2 dogs]

You wont find that data. You will need to work up carefully in your chosen sixgun.

[2 dogs]

Updated. We are going on a year here....

[cubrock]

I had wondered what was going on with this one. Glad it is still in the works!

[2 dogs]

PM to Miha requesting status. We have passed the one year mark on this one.

[2 dogs]

Last call, Miha says these will machine next month....

[JeffHolt]

If it isn't too late, I'd like to get in on this one.
4 cavity round HP with a set of flat pins also.
Thank you,

Jeff AT Appalachian Ammo DOT com

[rststeve]

I would also like to have a shot at this one 4 cavity hollow plus plain pins

KTM.kanyid at gmail dot com

[2 dogs]

updated

[Thaine]

One mould with a set of blank pins.
thaine AT yucca DOT net
thanks
Thaine

[RICHP]

2DOGS, if it,s not too late I would like to cancel my mold. I,m going to get out of the .32 calibers.

[2 dogs]

No Sir, but which one is your email address please?

[2 dogs]

Rich, I think I got you deleted.

[RICHP]

I think you did.

[Texinoz]

If it is not too late, please put me down for one mold with Hp pins and a set of flat point pins (and the lube die guide that Miha usually ships with molds please)
Arthur Hall (in Australia)
hallms at bigpond dot com

[MiHec]

working on this one , too. Just to know....

[Gundawg]

1 mold all pins if not to late.

guhndawg at gmail dot com

[2 dogs]

updated

[pauly]

G'day from Downunder . [smilie=s:

G'day Two Dogs , if it is not too late put me down for 1 x GC mold with all pins and a top punch please.

Regards Paul . :-P

paulbertramatlive.com.au

[2 dogs]

updated

[Dark Helmet]

Next month + a bit. Any more news? :popcorn:

[Thaine]

Two Dogs

I checked the list but didn't see my name on it. Post 167

One mould with a set of blank and HP pins.

thaine AT yucca DOT net

thanks
Thaine

[r1kk1]

Can he cut two cavities and the other two flat nosed?

Curious,

r1kk1

[twiggs1]

Put me down for one as well - with all available pins.

toyon.wiggs at gmail

[frankenfab]

Ok, I'm feeling like I did pretty well on this "used" 8 shooter:

http://www.gunbroker.com/Auction/ViewItem.aspx?Item=293411531

Now I am really excited about this mold!

[2 dogs]

r1kk1, you can configure the mold with 2 flat nose pins and 2 hp pins if you like.

list updated. Check for your name!!!

[bronte454]

Any ideas on time line for this one . Financial curiosity wants to know

[kirb]

2 Dogs

Please pull me from this group buy xp30br at silverstarbroadband dot com

Thanks
Kirb

[2 dogs]

updated

[cast-n-blast]

Miha, please change my Email to hoover0588 at aol dot com. Thanks, Jeff .I'm near top of the list. 7th down, jeffrey dot hoover......is OLD Email account.

[2 dogs]

Fixed it Jeff.

Updated

[bushog]

Please add: boo-haaa at hotmail dot com for ONE mould and 1 set of flat pins..

Thanks!

[2 dogs]

Updated

47 molds

[crash87]

2 Dogs, with my recent purchace of a 8 shooter and a 32/20 cal conversion in the works. I would be interested in one of these also.
1 mold and 1 set of flat pins.
ktlachac at aol dot com
Crash87

[2 dogs]

Updated. We are at 48 molds. Two more and we will hit 50! Not bad for a specialized 32 mold!

[Bardo]

will this be offered in plain base?

[2 dogs]

Not at this time.

[2 dogs]

Dr Brent, PM sent. Need you to look at post one and be sure your email is correct and delete your email address out of post 195 so you dont get spam email please Sir.

Regards.

Updated. 49.

[huntin dentist]

2 dogs I would like a 4 cavity mould. Please put me on the list. Thank you much. huntin dentist.

[2 dogs]

You are on the list Sir.

[Fugowii]

Please put me on the list for a 4C mould. fugowii at gmail dot com

[2 dogs]

Wow, this mold made the big FIVE O.

updated

[sixshot]

Fermin, would you cancel my order, I'm thinking I'll go another route, its been a long time on this one.

Thanks, Dick

[2 dogs]

I guess. But I dont see why. You waited this long.....

Updated for Mr Fickle....

49!

[frankenfab]

The 32 Sixgun Sledgehammer is not HERE!:(

[2 dogs]

To the TOP!

[historicfirearms]

please ignore

[2 dogs]

This buy is for a 4 cavity mold.

[Jeff Michel]

Please remove me from the list, sorry for the inconvenience.
Thank you,
Jeff Michel

[2 dogs]

Jeff, what is your email address??

[Jeff Michel]

2 dogs,
Sorry about that, my address is:
bmsouderatymaildotcom

Jeff Michel

[2 dogs]

OK, updated.

[sisterjim]

Is this buy still open?

[2 dogs]

Yes it is.

[rbrbrb6]

Fermin, stick my name on one of these molds with a set of regular pins.

Thanks Robb

rbrb10238 at gmail dot com

[2 dogs]

Robb, what do you mean by "regular" pins??

[tek4260]

I have a 632 in 327 that I am dealing hard on right now and will probably get it. Will this boolit work in the 632 or is it only for the longer Buckeye cylinders?

[2 dogs]

Thats hard to say without knowing how long the cylinder is on your 632. I dont have one to measure but maybe someone else here does and will chime in.

[tek4260]

Per Jeff Quinn, his measured 1.592 inches

Here is a link to the article

http://www.gunblast.com/SW-632CCP.htm

So 1.2 case + .4 nose is .008 too long..... damn.

[2 dogs]

Dont despair Bro! There are at least 2 other GBs for Miha molds in 32 caliber!

[Fugowii]

Please add one set of flat pins to my order.

Thanks,

F

[ElDorado]

Per Jeff Quinn, his measured 1.592 inches

Here is a link to the article

http://www.gunblast.com/SW-632CCP.htm

So 1.2 case + .4 nose is .008 too long..... damn.

1.200" is the max case length. Trim .010" off to 1.190".

1.190" + .400" nose = 1.590"

Perfect!

http://www.saami.org/PubResources/CC_Drawings/Pistol/327%20Federal%20Magnum.pdf

[2 dogs]

Updated. Still no news from Miha.

[nanuk]

these group buys have simply swamped the Makers on here.

this one started: 04-14-2011, 08:58 AM

Mihec got the drawings and was ordering a cherry: 08-22-2011, 05:02 AM

it is now: 11-04-2012, 01:12 AM CST and production hasn't even started. not even a word on whether the cherry was cut.....

19 months!

are the group buys too much of a good thing for these mould makers?

If Miiha really did quit his day job and go into mould making full time, I hope there is real profit in these for him, because 50 moulds at $100 each is only $5000 revenue and if the profit margin is 5% net, he'll be able to buy a few coffees and a tank of gas with the $250 cash left over....

[2 dogs]

Is there another group buy that is OLDER than this one?

[Bullshop]

Yes there was one Felix started about a group buy 22 cal mold.

[Dark Helmet]

Don't forget to add for the length of the case rim- I don't see countersunk rims on the chambers. Plenty of room!

[tek4260]

Going to have to re-measure tonight and count in the case head :)

[pauly]

G'day from Downunder . [smilie=s:

G'day All , any news yet if this is going to happen or not ? if so has it even made it to the production schedule yet ?

Regards Paul . :razz:

[2 dogs]

We are on the production schedule. However, the list I saw had several buys ahead of us yet. Miha has not updated us at this time.

[r1kk1]

r1kk1, got you on the list. We dont have a exact cost just yet. Should however be soon.

Make mine with all the pins also.

[2 dogs]

r1kk1, I can make the change but I need your email address.....

[2 dogs]

Wow, I just got an invoice for the 477640 mold from Miha. This tells me he is still building molds, albiet not neccessarily in the order the buy is in.......

Hopefully there is some light at the end of this tunnel....

[Gundawg]

Is it to late to get in on this? (fingers crossed)

[Zeus]

Fermin, let Gundawg have my spot. I thought I was off of this list but I think I'm still on it. If so, he can have my place in line :)

[2 dogs]

This group buy is still open.

Glenn, I will take your name off.

[2 dogs]

Todd, I just need your disguised email address and I will add you to the list.

Rikki, I still need to know what your email is so I can edit your order.

[Gundawg]

Cool, I am glad it is still open. Put me on the list for one with all the bells and whistles. guhndawg at gmail dot com.

[fivegunner]

could I get one 4 cavity mold with all the pins. thanks . fivegunner-at-sbcglobal-dot-net:Fire:

[ohnomrbillk]

Fermin,

Let fivegunner have my spot. My project is going a different direction, and I don't need one anymore.

Thanks,

william dot kinderknecht at gmail dot com

[kaytod]

2 dogs, PM sent.

[2 dogs]

Updated.

[Ken TN]

Please take my name off the list, I have picked up another mold for the 32.
KD5LHG AT YAHOO DOT COM
Thanks Ken TN

[Low Friction]

For my order I probably want to add all pin options.

[2 dogs]

Updated.

Low Friction, to add you to the list I need your disguised email address like they are in post #1.

[Low Friction]

I'm already added to the list. "xtrek64 at yahoo dot com ONE mold (plus 1 set of flat pins)". Will this get all the mold options? Thanks.

[2 dogs]

Yes it will.

Updated.

[Czech_too]

I've lost interest, and patience I suppose, with this buy. Kindly remove me from the list, czech_too at yahoo.com

[2 dogs]

Updated.

For the rest of you that have hung in here this long, we gotta see this one sooner or later...

[2 dogs]

I sent Miha another PM a couple of days ago requesting an update to see where we were with this buy. No response as of yet. Hopefully we will at least come up with an idea of where we are on his schedule for this buy by now. He has not responded to any of my previous PMs requesting the same tho....

[Crash_Corrigan]

I just realized that this is a GC mold. I musta had a brain phart when I ordered this. Please remove me from this GB as I only want to use plain based boolits. The extra expense and work involved with GC's do not trip my trigger.

crashcorrigan at cox dot net

Dan Corrigan AKA Crash Corrigan

[2 dogs]

Updated.

[Fugowii]

Wow, closing in on two years now. I would think Miha ought to have some idea when this is going to fly.


I sent Miha another PM a couple of days ago requesting an update to see where we were with this buy. No response as of yet. Hopefully we will at least come up with an idea of where we are on his schedule for this buy by now. He has not responded to any of my previous PMs requesting the same tho....