429383 Help!!

[Lizard333]

I bought this mold for my 44 mag and I can NOT for the life of me find reloading data. I want to use this load as a plinker and do not want to load it real hot. I would prefer to use 231 or HP-38 if you have any loads for that powder, but I will do with what I get. Any help at all would be great!!

[45 2.1]

I bought this mold for my 44 mag and I can NOT for the life of me find reloading data. I want to use this load as a plinker and do not want to load it real hot. I would prefer to use 231 or HP-38 if you have any loads for that powder, but I will do with what I get. Any help at all would be great!!

Any data for the 429421 would work fine. 4 gr. of Bullseye in the 44 Special case or 7 gr. of Green Dot in the 44 Mag case will get you where you want. Take care to size it to your cylinder throat dimensions or 0.0005" larger.

[Lizard333]

I am guessing around 7-7.5 gn's of 231 would be safe but I can't be too sure......

[MtGun44]

Any lead boolit data for the same or similar weight will be just fine.

Bill

[songdog53]

Can always use loads recommended for next boolit up in weight. That way will know won't be as hot as any bullet of lesser weight.

[Thumbcocker]

6.0 of 231 was reccomended a long time ago.