Lyman Kake Kutter for .454 conical ???

[geraldbergeron]

Hi,

I am looking for an item that seems to no more exist... ?

I would want a pan lube cutter for a .454 conical

If you know something, I would appreciate that you let me know.

Thank you for the attention......................................... ..Gerald.................../

[45 2.1]

Send a PM Buckshot about making one. He fixed me up one for 0.575" and it works great.

[Char-Gar]

Get you a fired 458 Mag, 460 Weatherby or similar case. Grind off the head or drill a 460 hole in the head... You now have a .454 Kake Kutter.

[13Echo]

When pan lubing I find it a lot easier to dump the cake of lube with the bullets out onto a towel after it has cooled but is still slightly warm and then push the bullets out. Actually faster and less messy than a cake cutter.

Jerry Liles

[Etienne Brule]

Thank you everyone,

Will try those hints.

Etienne Brûlé.

[KCSO]

I have an old cutter made from a 45-70 case with a push rod and a handle installed. You push down over the bullet and then pop it out with the push rod. I'll try and post a picture it is the neatest cutter i have.

[Etienne Brule]

I have an old cutter made from a 45-70 case with a push rod and a handle installed. You push down over the bullet and then pop it out with the push rod. I'll try and post a picture it is the neatest cutter i have.


Hi,

Very interested with your picture.

Thank you

Etienne.