What about 339365?

[seppos]

Sharp as needle..High BC:s, but would it be possible to have them for the .338:s..
If there is enough interested people, maybe Swede will press the go- button for it.

http://i459.photobucket.com/albums/qq319/seppos_photos/339365.jpg

S

Hope this photo works.

[Trapaddict]

Am I the only one having trouble opening the link to Photobucket? Seppos - You thinking something in the 250-260 grain range? If Swede would do something like he did for the 358318 RNGC GB where you could get one cavity HP'd and the HP pin puts a flat point or a HP on the boolet, Hmmmm..... very interesting.

JK

[Hardcast416taylor]

Couldn`t get photobucket to open either. The idea of the mold is interesting though.Robert

[Trapaddict]

Surprised there isn't more interest in this one. Nice practice/plinker for the 338 Edge and Lapuas.

Bump to the top.

Jeff

[danny.k]

I´m interested! Need such a mold for my 338Lapua[smilie=w:.

[danny.k]

Back up on top.

This one must be of interest to more people!...?

[danny.k]

250-300grainer would be fine. Byt i'd like the boolit as pointy as possible...maybe a 300grainer would need a blunt nose to be short enough to fred through My rifles magazine. I'd probably use it as singleshot repeater anyhow...hmm


Sent from my iPhone using Tapatalk

[Splatter]

I'd even entertain the idea of a boolit heavier than 300 grains We might be giving-up some velocity anyway, to keep the leading controlled, longer boolit means higher BC (all else being equal, of course)
Maybe a sharp point and 325-to-350 grains?

[Bob J]

I'd be in for a 300 grain (or so) sharp.....:wink:

[frnkeore]

I'd like to have one also, sharp point at least 250 gr.

Frank

[Bob J]

Bump for interest....;- )

[Aaron]

I would be interested.

Aaron

[Idaho Sharpshooter]

339365 in a 300gr would be just fine. Pencil me in if y'all would.

Rich

[Splatter]

how about...........
http://i487.photobucket.com/albums/rr236/scb2008/338302.jpg
340302


I'm really liking that ^^^^ !!

[danny.k]

Yep, thats the one :drinks:

[Splatter]

OK, I'm firmly commited to a 2-or-3 cavity of the "340302". And I'd pop the extra $10 for the small order, if required.

[danny.k]

Ok, i'll bite.
A 3 or 4 holer +$10 is fine with me if the boreriding part is snug enough for my barrel...need to slug it.


---
I am here: http://maps.google.com/maps?ll=59.065212,15.348860
Sent from my iPhone using Tapatalk

[Bob J]

I'm ok with an extra $10.....:Fire: Count me in!

[geraldsd]

I would like a 4-cavity.

[SuperChuck]

SCB were you thinking of any particular cartridge with this in mind..? Seems the .338 Spectre would benefit from it, especially if its basically a scaled up and sharpened up 311247...

A flatnose pin or some easy way to flatten would be nice, but considering the cost of .338 j-words, anything is an improvement :-)

I'm definitely interested.

SC

[Idaho Sharpshooter]

340302 in the 300-325gr range would be enough reason for me to start thinking about a B-I-G 338. The 341299 is another fine looking design.

Pencil me in for a four cavity of which ever is decided on. If we can do both, that would be fine for me. One of each, and thank you kindly...

Rich

[scb]

How about to make this easier to follow, if your interested copy this, paste it in a "quick reply" and add your handle.
1 scb Sorry, I'm out. Going elsewhere, not enough interest, even from builder.
2 Idaho Sharpshooter______340302_________341299
3 geraldsd
4 Bob J
5 danny.k
6 Splatter
7 SuperChuck
8 psdiver102
9 seppos
10
11

[SuperChuck]

You can take the uncertainty out, I'll bite :-)

[psdiver102]

I want one. either 3 or 4 cavity

[Idaho Sharpshooter]

SCB,

O Jeez, now I have to build a 338 Edge over the winter.

Mark me down for whichever the group decides on. Both if possible, 4-cavity please.

Rich

[danny.k]

These are the dimensions as modeled in SolidWorks

http://i487.photobucket.com/albums/rr236/scb2008/338302dim.jpg

They of course can be changed.

The above specs seems to fit my 338 Lapua perfect!
Any estimate on the weight of such a boolit?

[danny.k]

;-) , ohh yeah... Well this thread needs all the bumps possible.

Need this mold "pronto" cause buying those $1 each Scenar bullets are killing my economy....


---
I am here: http://maps.google.com/maps?ll=59.065380,15.348909
Sent from my iPhone using Tapatalk

[Idaho Sharpshooter]

Pencil me in for a four cavity of each design if you would please. Just confirming my interest!

Rich

[psdiver102]

Lets bump this one. daddy needs a new .338 mould

[seppos]

I think that I will take 4 or 5 cavity and se no problem with extra 10 bucks in the cost..

S

[Idaho Sharpshooter]

Do we have ten yet on each design?

The flat nose has "Elk Stomper" written all over it, and the pointy one just looks too fine in a 338 Edge to pass up.

I'd be happy to pay the extra ten-spot to get going.

4-cavity of each, gas checked of course.

thanks,

Rich

[Idaho Sharpshooter]

We NEED to get this rolling people.

Rich

[SwedeNelson]

Working on the drawing.
With a length of 1.55" we will need to go with our large (deep) blocks.
Will try to get a drawing and more info posted yet this week.

Hang in there.
Swede Nelson

[Bob J]

Working on the drawing.
With a length of 1.55" we will need to go with our large (deep) blocks.
Will try to get a drawing and more info posted yet this week.

Hang in there.
Swede Nelson

Thanks Swede!

:lovebooli

[Idaho Sharpshooter]

that would work for me, even a two cavity of each would be good enough.

you are working on a scaled up 311247 and 311365, right? Choice is good...

Rich

[scb]

you are working on a scaled up 311247 and 311365, right? Choice is good...

Rich

No they are both scaled up 311247. The one basically just has the ogive carried forward to form a point. The lube grooves are toward the back of the boolit to keep them inside the case. Grooves on the 365 are more widely spaced.

http://i487.photobucket.com/albums/rr236/scb2008/340299-302.jpg

[Splatter]

Wouldn't that pair be sweet in a single block?

[Splatter]

Looks like we're in to July and we still only have 9 commitments.
http://castboolits.gunloads.com/showthread.php?p=1427445#post1427445

It looks more like August now!

[scb]

How about to make this easier to follow, if your interested copy this, paste it in a "quick reply" and add your handle.
1 scb Sorry, I'm out. Going elsewhere, not enough interest, even from builder.
2 Idaho Sharpshooter______340302_________341299
3 geraldsd
4 Bob J
5 danny.k
6 Splatter
7 SuperChuck
8 psdiver102
9 seppos
10
11

Sorry I'm out.

[greywuuf]

1 scb Sorry, I'm out. Going elsewhere, not enough interest, even from builder.
2 Idaho Sharpshooter______340302_________341299
3 geraldsd
4 Bob J
5 danny.k
6 Splatter
7 SuperChuck
8 psdiver102
9 seppos
10 greywuuf
11

[SwedeNelson]

Sorry to be taking so long to get back on this one.
Would like to find something I can offer that will fit
in our standard blocks.
Our large blocks are great but really dig in to production time.

Still working on a drawing.

Swede Nelson

[Idaho Sharpshooter]

Swede,

I am on the list for one of each, does that count to making it ten on the list instead of just nine?
Anything to move us forward towards scheduling.

2-cavity of each, GC, with probe hole drilled

thanks,

Rich

[Bob J]

Just to be clear I'm in for the pointy one.....;-)

[danny.k]

Just to be clear I'm in for the pointy one.....;-)

Only the pointy one for me aswell.

[dromia]

I'd be interested in a pointy one. :-D

[Allgrainbeer]

I might be interested

[frnkeore]

I'll take a 339365 PB

Frank

[Bob J]

Would also like to have mine drilled for the probe.....;- )

[sffar]

I'd be interested, but in a somewhat lighter bullet of 275 grains max. I'd be shooting it in a 338/06.
There's interest in a 358365 as well–perhaps the same tooling could be used?
Sam

[Bob J]

Bump :castmine:

[danny.k]

This one seems to go nowhere...:cry:

[scb]

That's why I'm going with this>>>>>http://www.accuratemolds.com/bullet_detail.php?bullet=34-310B-D.png. I know it's not a pointed boolit but that's not a requirement for me.

[danny.k]

And i really need a pointed one...

[SwedeNelson]

This is what we can come up with
http://i69.photobucket.com/albums/i80/swedenelson/1111-185-341295grFN.jpg

http://i69.photobucket.com/albums/i80/swedenelson/1111-185-341250grSP.jpg

Was trying to come up with a heavier SP but it will take a complete block redesign.
And that's not in the cards for any time soon.
On the up side we could do either one as a SGB (small group buy)
It would only take 5 orders to get it on the scheduale.

Swede Nelson

[danny.k]

Ok, i`m still in for a mold.
Pointy GC 4-holer please.

[sffar]

I'd go for a pointy GC two cavity. Out of curiosity, is hollow pointing one cavity possible?
Sam

[Bob J]

Still in for a pointy GC 4 cavity.... SGB is fine with me....

[dromia]

I'd like one of each, 4 cavity GC drill for probe.

[psdiver102]

Im still in for either. would love to get the top one as a hollow point, in which case, i would get both

[Splatter]

OK, if we're going to delay the pointy 300 grain mould, then I'd be in for a 4 cavity of the pointy 250.

[dromia]

TTTop.

[frnkeore]

Count me in for the spitzer, even at + 10.

Frank

[Idaho Sharpshooter]

Swede,

what about an SGB package?

RG-2 on the flat nose, and a two cavity spitzer in a four cavity mould? I think it would work, just use a five cavity block and leave the center hole blank to provide a bit of extra clearance for the RG-2 cavities.

I'd be in for this in a heartbeat, even at $150 plus S&H.

[Charlie in Co]

So where are we with this group buy? I would like a pointy one for a 338-06.

[Blammer]

I'll honcho if there is still interest.

[danny.k]

Still want a 4-holer.
The pointy one.

[Splatter]

OK, if we're going to delay the pointy 300 grain mould, then I'd be in for a 4 cavity of the pointy 250.

I'm still in for either; but not both (not right away at least).

[Blammer]

OK I started a group buy for the pointy version in 338 cal.

Please sign up there for it

here's the link

http://castboolits.gunloads.com/showthread.php?p=1601258#post1601258

[Idaho Sharpshooter]

I'm in for a 4-cavity. I'd be happy to pay SGB pricing for the flat nose one as well.

Rich

[Charlie in Co]

Just signed up for a 4 cavity GC

[DUKE NUKEM]

I'll take the pointy one.

[DUKE NUKEM]

[smilie=6:

[captain awesome]

boy I would really love a 300 grain pointy one. will be purchasing a 338 lapua with tax return money this year.

[captain awesome]

Well,
I contacted SwedeNelson about something I noticed. the 850 grain .513 mold will make a Boolit 1.795" long. seeing that I thought, if he used those blocks we could probably get our 300 grain .339 pointy Boolit some of us want so much. He replied and said he thought it would work, and he would tr to make some time for it. If there is not much response here, I'll just start a new thread for it, unless Swede beats me to it.

[Splatter]

Good eye there Captain!

If you start a new thread, or see one that Swede, or anyone else starts, don't forget to leave us a link here, please.

[captain awesome]

http://castboolits.gunloads.com/showthread.php?p=1725836#post1725836

DONE