Slugs for Barrels

[bowfin]

Does anybody sell slugs for checking the diameters of barrels?

Many say to use egg sinkers, but I have a lot of firearms in a lot of different calibers, and I don't want to spend a lot of time getting slugs unstuck that could be more profitably and enjoyably spent doing something else.

[NSP64]

What calibers are you wanting to cast for? List them and maybe we could send ya a few to slug with.

[Ickisrulz]

Beartooth bullets sells them on line. The sell all the different sizes. I just ordered some...took a while for me to get them though.

[BABore]

Soft lead hollow egg fishing sinkers. Check the hardness as some are hard or non-lead. They come in a variety of sizes and are cheap.

[bowfin]

I am looking for 6.5, .45, .357/9mm, .41, and .44 as a start.

I will get out the tackle box and micrometer and see if I have any that are close.

[HighHook]

I usually size at the typical size for caliber and shoot. if you have leading or accuracy issues then slug and determine the problem. 9 out of 10 times i have not needed to slug.

[mooman76]

Beartooth bullets sells them on line. The sell all the different sizes. I just ordered some...took a while for me to get them though.

Should have spoke up. I could have given you some.

[mooman76]

I am looking for 6.5, .45, .357/9mm, .41, and .44 as a start.

I will get out the tackle box and micrometer and see if I have any that are close.

Send me a PM with an address and I'll get some out to you.

[Wayne S]

LBT sells them, I go by what I get from slugging the chamber/cylinder throat
OR use cerosafe