Wideners primer sale

[mroliver77]

Heads up!
Wideners has Wolf primers for $15.50 - $16. per K. Anybody in NW OH want to share an order?
http://www.wideners.com/itemview.cfm?dir=278|284|737
Also the Lee pro 20 for $45.
http://www.wideners.com/itemdetail.cfm?item_id=3060

[Digger]

For that price the lee 4-20 might be good for a future back up just to have extra .....

[Ole]

I don't need any more primers right now, but if anyone in the Phoenix area wants to split a HAZMAT pm me.

[HighHook]

When my buddys find out how low these things are they are going to kill me.
Last year when no ammo was to be found i told every one to buy all the primers they could afford.
They $25-30 per 1000 and stocked up to the end of time.

Its been nice chatting with all...

[chris in va]

Too bad I can't get Wolf to light properly.

[462]

"Too bad I can't get Wolf to light properly."

I've never had a problem.

Make sure they are seated to the proper depth, which can be problematic if you use a press mounted priming system.

[Denver]

Powder Valley has a deal on Tula primers also. Free shipping and HazMat if you order 10,000. Plus you can order up to 45 lbs of other goodies in the same package at no extra charge. Anyone here using Tula primers? Any good?

:lovebooli

[mpmarty]

I use Wolf LP primers in nearly every cast boolit round I load, rifles pistols don't matter they work and work well for me. Even my striker fired pistols light them off no problem.

[bumpo628]

There is another sale over at powdervalleyinc.com
If you buy 2 cases of Tula primers (10,000) they give you free hazmat and shipping.
You can also ship up to 40 lbs of other stuff for free under the same hazmat.
http://powdervalleyinc.com/

It's a good chance to stock up on powder and primers.
You'll have to run the numbers between Wideners or PVI to see what works out the best for you.

[Dannix]

I took advantage of that PowderValley deal and picked up a good bit of powder too. I was about to kick myself when I saw Wideners's prices posted above, but then I remembers shipping and hazmat.

I may pick up that Lee Pro though... maybe two: one for casting, one for smelting.