Pacific reloader shellholders

[Box13]

I have a couple of pacific shotshell reloaders and all the dies to load 20ga and 410 but Im short 1 each of the shell holders.Is there someone here willing to make me a couple if I supplied an example?I could handle the threading and hardening if I could just get the shell holder section milled and the basic shape turned.Ive been looking on ebay but they rarely show up indivdually and the sets go for way too much money.They are just a basic shell holder with a threaded shaft on the bottom...Robin

[NoZombies]

1/2 x20 threaded like the old CH and Hollywood shellholders?

[Box13]

I think thats the thread size.But I think the threaded section is a little longer.These measure 1.5 in from the base to the end of the threaded section.Heres a pic of the 2 I have,I need 2 more.The little one is a 410 the larger is 12 ga.
Robin
http://i715.photobucket.com/albums/ww157/Box13photos/P1010258.jpg

[Toobroke]

Box 13, I may have some help for you. Years ago I got a copy of the drawing from Hornady for a 16 ga shellholder for the 155/266 presses. I lucked out and got a 16 ga shellholder shortly after and never had to have one machined--but I hung onto the drawing. I seem to be having troubles hosting the scan on this site but if you send me a PM with your email address, I'll send the scan to you as an attachment. The 410/20 ga dimensions should be the same as the chamber drawings in Lyman's shotshell book I would think.