PDA

View Full Version : Lyman Moulds


LAH
10-29-2006, 09:41 PM
Is their a list of moulds some where. Maybe the mould number and a picture of the bullet? I'm interested in the 313249 & 311467. Thanks guys.

Creeker
45 2.1
10-29-2006, 09:49 PM
Try here:

http://www.three-peaks.net/bullet_molds.htm
floodgate
10-29-2006, 09:57 PM
LAH:
....or, go to CASTPICS at <www.castpics.net> / Research & Data / Lyman Moulds. These photos come from the 1973 Second Edition Lyman "Cast Bullet Handbook".

(Edit: unfortunately, the page covering the .313 - .316 bullets was dropped out when the CASTPICS chart was posted; the #313249 is a standard, two-grease-groove, round-nose, plain-base bullet [a miniature of the factory .38 Spl. bullet], casting 84 grains in No. 2 alloy and taking the Lyman #226 lube-sizer top punch and the same number seating screw. The Three-Peaks chart [from the same source] misses #313249 too. Hope this helps.)

floodgate
GLL
10-29-2006, 10:10 PM
Creeker:

I have my copy of the 1973 Cast Bullets Handbook at work and will scan & post the appropriate pages Monday morning.

Jerry
LAH
10-30-2006, 10:01 AM
Ok guys I found what I was lookig for. Thanks, all of you are great.

Blessings...............Creeker
GLL
10-30-2006, 06:08 PM
Creeker:

A little late it looks like ! :)

Jerry

http://www.fototime.com/0F713B4E73407A1/standard.jpg
KYCaster
10-30-2006, 07:37 PM
Jerry: Those are the two pages missing from the list on Cast Pics. I wonder if it would be possible to get them included there. I use that list a lot and its disappointing when the one I'm looking for isn't there.

Anybody know who could take care of that? 45Nut maybe?

I'll see if I can print these out just in case. Thanks, Jerry.

Jerry
45nut
10-30-2006, 08:51 PM
Thats Sundog's territory,I don't doubt he would be willing to run them up the CastPics flagpole.
GLL
10-30-2006, 10:41 PM
I will make a cleaner/ higher resolution image and see if he is interested in passing it along.

Jerry
GLL
10-31-2006, 12:43 PM
45Nut:

Here is a copy of the pages that are missing from the CastPics site. Please forward them to the appropriate person (Sundog ?) who would consider adding them to the list.

Best Regards,

Jerry Lewis (GLL)

http://www.fototime.com/73522CD987BFEED/standard.jpg