Molds for the 9.3s?

[Abert Rim]

Just wondering who casts for one of the 9.3 rifles with .366 bores. Who made your mold?

[dragonrider]

NEI made mine, it is a four cavity with two cavity for a 270 grn gc, and two for a 304 grn gc. Neither of which do wll in my rifle, it is a 9.3x57 and I think these two boolits are too heavy for this rifle.

[Pilgrim]

Dan @ Mountain Mouods. 286 Gr. GC / 2 Cavity. Pilgrim

[9.3X62AL]

Dan at Mountain Molds also, a 270 grain ogival flat point that gets close to 1" at 100 yards prompted by 23.0 grains of 2400 and dacron. This is from a CZ-550 in 9.3 x 62.

[catboat]

That flat point 270 grainer sounds good. I'll check it out for my CZ 550 9.3x62.