View Full Version : Paper Patching
- Teflon tape for lube ?
- Paper Patched Bullets!
- Buckshot... Paper Patch Question
- Paper Patched Boolits
- patched loads for 1895 marlin CB
- Paper Patch Bullets
- Paper patch
- Paper patch in 38-55 Win
- pp another way
- Paper patch bullets
- papper patching
- Paper Patch questions
- Paper patched in a marlin microgroove?
- Light Load for Paper patched bullets
- "Patched" REAL bullets?
- Designing a Paper Patch template
- Paper Patch Advice.
- PP boolits
- paper patch 7.62 x 39
- Paper Patch Bullet Project--Help?
- Some shooting with the Whitworth
- 2 groove barrel and paper patch.
- Paper Patching a .44 Mag and .444
- Success w/ 30 Cal paper patch bullets
- New Paper Patch Sub Forum
- Paper Patching a 9.3mm Husky
- The 375 H&H Patched
- Lubricated Wire Patched Boolit
- New Buffalo Arms Molds
- Where to get a patchable boolit mould for 44
- Kind of quiet out there..........
- The Jacketed Patched Bulle
- PP and black powder
- wetting the patch
- ?? for Dust Collector & Pdawg Shooter
- Banded boolits
- Rooster jacket lube
- Ever try not using lube?
- Old art forms.
- What mould to buy for PP 45-70?
- The Sharps Paper Patch Chamber
- Newb Q's
- Teflon anybody?
- ISBN number
- paper patch for a ML
- Finally Going to try it
- 1st attempt
- Day at the Range
- How the mould was made
- Lee case lube
- ML paper patch test 2
- Paperpatch apprentice.
- Patching primer?
- Can PP bullets help me?
- Got some of my swaged boolits patched :-)
- Heavy 45 Colt swc for 45-70 PP load
- Paper patch a J-bulet?
- BACO PP .441 bullet
- Another new Mould arrived today
- 44 mould on ebay
- What's it For?
- how to books on pp boolits
- The paper jacket
- Heavy 44 cal pp bullets
- An Experment Gone Right !
- WTB Paper Patch Boolit Mould
- What to do with scraps
- Getting started in PP'ing
- load density and light loads
- Gas Cutting/Leading
- Paper Patching for .35's
- quick question
- Paper patched bullet design
- Micro-Groove for Patched Bullets?
- Paper patching SWC's
- Kal .369-2.5t-200
- Another patching question
- Paper-patching grooved bullets ???
- PP a 22 for a 30 cal?
- New to paper patching
- Paper Patch the 8mm
- Precut paper patches
- First try at paper patching
- "paper Patching" With Copper?
- Trial 2
- soft lead and pp
- Vellum?
- Have Yous Tryed This
- Cigarette paper?
- Some success....more work to do
- Anyone tried Aluminium foil instead of paper
- Paper patch in 7.62X54
- LIthgow #1 MK III
- Sizing Paper Jackets
- watched ,read ,learned,did it
- Anyone got a receipe for .30 cal?
- Hah! It works.....
- paper patch NEI
- Never paper patched before....
- .22?
- Paper patch upsized
- Success!
- paper patch on jacketed bullets
- Will this work??
- Brent Danielson's Paper Patching Website
- Has anybody tried...
- PP Bullet Info!
- GB on LEE PP Boolit
- Link to Brent Danielson's Paper Patching website.
- Sucessful load ! Whoo hoo !!!
- Weather proofing
- paper patching questions
- Bore polishing (NOT firelapping)
- Fire Lapping
- .30 caliber mold recommendations
- paper sticking to the case neck
- Max bullet weight for .40 cal 1-24"
- The Paper Jacket
- Bullet performance
- PP nose Q's/design Q?
- paper size and how many wraps?
- Deathmatch for Bull Goose Looney at Raton
- Look in group buy for 'My Cherry' 45 cal rifle bullet
- H&r 45-70
- Paper problems
- Ballistics
- Another really good 8 x 57 PP load....
- Do we need to cut the tails?
- The Art of Paper Patching w/photo!
- Paper Patching??
- Re: The Art of PP - other factor effecting accuracy
- How much confetti?
- Feeding PP boolits from magazine?
- Paper 101
- Score!
- Heat shrink tubing?
- There's paper patching, and then there is paper patching
- Check my PP math
- Angle of cut.
- Why?
- Paper Rolling?
- Alloys and patches
- Is cutting the tails important? It might be.
- For those who might know.
- PP a 30-30 ?
- Informal twisted tail vs. flat base test.....
- PP velocity gain?
- My pants just got shorter!
- 43 Mauser - PP Bullet size?
- PP a 336 in 35REM???
- rolling machine
- Thanks, You folks are great instructors!
- I have this old mold....
- sizing question
- Why bore for BP, groove for smokless?
- mold size question
- Grease Grooves
- "Cockle" finish paper- ? for Catboat
- Loading paper patched boolitts
- Trouble sizing bullets. Flare at base.
- Paper patching .30 cal.
- Paperpatching ??
- Partial paper patching (PPP)
- Paper patching 25-06
- How do I Title This One?
- Ready to try this
- Another pp ?
- Wrapping the bullet
- How I Load Now
- PP handgun loads
- Got them wrapped
- First results; not so good
- A "perfect" wildcat??? cartridge (large game) for paper-patching......
- How to make a paper patched bullet mold
- Depth of seating.
- paper patching a flat base bullet?
- Next size down?
- Undersize 457125
- Good news
- Large blueprint paper: Good or Bad?
- 44/100 ballard paper patched bullet
- Pp ???
- Paper patching the .43 Mauser
- Tell me about molds (Molds 101)
- Something New
- Paper Thickness?
- S.W. Kansas
- 450/577 Martini Henry
- pure lead PP?
- Quick question
- Teflon?
- Steady, If Slow, Improvement
- Spent patches - smokeless
- The sweet smell of powder!!!
- First attempt at P.P. a huge success
- Which way to wrap? grain of paper
- Paper patch mold making
- BPCR patching - wads?
- Thickness Chart
- plain,bevel or stepped
- Paper too thin?
- Mold design
- Paper Patching...my way.
- 38/55 PP mold
- Wrap direction.
- Made a patching board
- Casting cellulose sabots.....
- Can you PP a standard cast bullet with lube grooves?
- Success!
- Patching regular boolits
- P.P Lube ?
- I tried it and liked results
- Does it end?
- Calcium BiCarbonate
- laundry soffener
- Paper Patching Adventures
- teflon wrapped bullets......................
- Deer with a PPB
- 3000 fps
- Loading advise
- Paper patching 8x57
- Silly Question...
- ?Designer? Patch - a newbie's first roll . . . .
- Are PP'd boolits hard on barrels?
- Need sizing die advice
- Tails of the Patch
- Low Wall Winchester in 32-20
- paper rings left in chamber?
- Paper patching sensitivities
- "How much will a bullet bump up?"
- First try in this mysterious and historical methodology
- Another silly question
- 7mm to .303.
- .43 Mauser Range Trip
- case separation
- can someone explain the benefits of paper patching.
- Now it is going to get interesting.
- We Should Get Togeather and Make Some Stickies
- .443 diameter bullets
- Baking Cups for patching?
- What is the purpose of paper patching?
- 35 remington paper patch question
- Trimming tails for = pressure
- Patch dimesions
- No longer a virgin
- Paper & Jacketed Comparison
- cigarette rollers
- What diameter for bare boolit?
- Wrap pushing off when sizing
- To begin using paper jacketed bullets, does Matthews' book info I need?
vBulletin® v3.8.4, Copyright ©2000-2009, Jelsoft Enterprises Ltd.